Warwickshire · England

Non-slip bath & shower coating in Alveston, Warwickshire

Non-slip bath coating in and around Alveston: a fixed quote from pictures, a tidy visit and a one-year guarantee.

  • A bath or tray that is slippery when wet
  • Worn-out textured areas
  • Bath mats that harbour mould or get forgotten
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted non-slip bath coating in Alveston

About our non-slip bath coating in Alveston

It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. It’s popular with older people, families and holiday lets. We are frequently asked to fix worn-out textured areas and a bath or tray that is slippery when wet, in resurfaced baths, shower trays and enamelled baths.

A one-year guarantee comes with the work, just as it does everywhere we cover. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.

Before and after: an old shower tray refinished by Surface Doctor
Where
Alveston (CV37)
Region
Warwickshire
Warranty
12 months on all our work
Quotes
Free, fixed price from pictures
Phone
0345 017 0787
Last updated
23 October 2026

Repair or replace in Alveston?

Instead, you could go for replacing the bath or tray with a textured one, or relying on a mat, which traps water and needs cleaning. A non-slip coating treats your existing bath or tray. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.

What you get with us

  • Every repair guaranteed for a year
  • Rooms protected and left tidy
  • One price list for the entire UK
  • Free fixed quotes from pictures

See our pricing.

Can I fix it myself?

It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.

If you are set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and don’t use it until it has fully cured. If it fails, we can still put it right.

How we price non-slip bath coating

There are no hourly rates or hidden extras. The price depends on:

  • How much damage there is
  • Access to the area
  • The material
  • What kind of damage it is

The price depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. You get a fixed quote from your photos, so you know the cost before you book.

Send pictures for a quote

It only takes a minute to photograph the damage, and it saves a visit. Please include:

  • Daylight if possible, and no flash reflection
  • Any earlier repairs or coatings
  • The material, if you know it
  • A coin or ruler next to the damage for scale

You don’t need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will reply with a fixed price.

Covering Alveston

Alveston is about 2 miles east of Stratford-upon-Avon, in Warwickshire. We travel to clients in Alveston, so you do not need to take anything anywhere. We work in all 324 towns and villages in Warwickshire, from the larger towns to small villages. Our jobs stretch from Alveston to Birmingham (21 miles away).

We work across CV37 and the streets around it. That includes homes on Avonfields Close, Ferry Lane and Kissing Tree Way. Neighbouring places we cover include Ingon (1 mile north-west), Hampton Lucy (1 mile east), Black Hill (2 miles north), Snitterfield (3 miles north-west) and Heath End (3 miles north). We also work in nearby towns such as Warwick (6 miles north-east), Royal Leamington Spa (8 miles north-east), Leamington Spa (8 miles north-east), Kenilworth (10 miles north), Southam (12 miles east) and Alcester (9 miles west).

What’s near Alveston

Around Alveston, we work in homes near Alveston CofE Primary School, King Edward VI School and Church of St James, among other places. Alveston’s nearest station is Stratford-upon-Avon station, about 2.6 miles west of the centre. Other landmarks nearby include Stratford Motor Museum (2.2 miles west) and Temple Hill (1.6 miles west).

Map of Alveston © OpenStreetMap contributors

What we do, step by step

We turn up when we said we would, introduces themselves and looks over the damage before anything else. Dust sheets and masking tape go down before we open a single tin. Most visits take a morning or an afternoon, and we leave the room as we found it.

  1. First the standing area is cleaned and degreased.
  2. Next we mask off the area.
  3. The clear textured coating is applied.
  4. The masking comes off to leave a neat edge.
  5. Once it has cured, normally overnight, it’s ready.

Preparing for the visit

  • Avoid using the area for a few hours before we arrive
  • Keep a parking space free if you can
  • Keep pets and children out of the room while we work

How to get a price

Upload a photo of the damage and one of the whole item, with your CV37 postcode, and we’ll come back with a fixed quote.

Get a fixed quote

Advice

Your questions about non-slip bath coating in Alveston

Will a non-slip coating change how my bath looks?

Very little: it shows as a matt area where you stand.

Will you leave a mess?

Very little mess: we sheet and mask everything nearby, and we take our waste away with us.

How quickly can you book me in?

Your quote comes with available dates. Tell us if you need it done quickly.

How much does non-slip bath coating cost in Alveston?

We give a fixed quote from your pictures. Send a close-up and a photo of the entire item and your postcode.

Is there a guarantee?

All our work carries our one-year guarantee. Ask us what it covers when you get your quote.

Can you price it without visiting?

In nearly every case. If photos do not show enough, we will ask for another angle.

Is there a call-out fee?

No. Our quotes include travel, with the same prices everywhere we work.

Are you accredited?

We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

When to call us in Alveston

Smooth surfaces are easy to clean, but wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.

Clients typically contact us about:

  • Bath mats that harbour mould or get forgotten
  • Worn-out textured areas
  • A bath or tray that is slippery when wet
  • Resurfaced baths that are now too smooth

Before you book anyone

  • What happens if they find more damage
  • Who will actually do the work
  • What preparation is included
  • What aftercare is recommended

Our hiring checklist

Work for landlords and builders

If you manage property in Alveston, we’ll quote for several properties at once. Just send pictures for each address and we’ll come back with a combined price.

Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.

What a repair cannot fix

Honesty matters more than a booking, so here’s what a repair won’t do:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Not sure? Send pictures and we will give you a straight answer before you book.

What we work on

  • Enamelled baths
  • Acrylic baths
  • Wet room floors (ask us)
  • Resurfaced baths
  • Shower trays
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.