Warwickshire · England

Non-Slip Bath Coating for Ingon homes

Our repair technicians come to Ingon for clear non-slip coatings for baths and shower trays. Nothing is taken out, and the work is guaranteed.

  • Worn-out textured areas
  • Resurfaced baths that are now too smooth
  • A bath or tray that is slippery when wet
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating near Ingon

The process

When we visit, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. Expect it to take a morning or an afternoon. We clean up when we are done and let you know when you can use it again.

  1. We clean and degrease the standing area.
  2. The area to be treated is masked out.
  3. We apply the clear textured coating.
  4. We remove the masking for a neat edge.
  5. The coating is left to cure before use, usually overnight.

Preparing for the visit

  • Have a window or extractor fan available
  • Make sure the area is dry
  • Mention if the room is upstairs or in a flat

Getting a price

Getting a quote takes a couple of minutes: photograph the damage, then the entire bath or shower tray, include your postcode and send them over. What comes back is a fixed price, not a guess.

Send pictures for a quote

Read more

Non-slip bath coating in Ingon, done in place

It suits older people, families and holiday lets. It’s a clear, textured coating, so the bath looks much the same. Common call-outs are for resurfaced baths that are now too smooth and safety for older or less mobile people, in acrylic baths, shower trays and resurfaced baths.

Every job is backed for twelve months, and the guarantee is the same wherever you live. If something goes wrong with the work, we come back. A soft brush and mild cleaner keep it clean. Do not use abrasive pads on the textured area.

Stained shower tray resurfaced to clean white, before and after
Location
Ingon (CV37)
Area hub
Warwickshire
Cover
A year, on every repair
Price
Fixed and free, based on photos
Call
0345 017 0787
Page updated
23 October 2026

When to call us in Ingon

Baths and trays are made smooth so they’re easy to clean, yet wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.

Keep an eye out for any of the following:

  • A bath or tray that is slippery when wet
  • Resurfaced baths that are now too smooth
  • Bath mats that harbour mould or get forgotten
  • Safety for older or less mobile people

What your quote should include

  • How changes to the job are handled
  • Aftercare advice
  • How long it needs to cure
  • The length of the guarantee and what it covers

How to compare quotes

What affects the price in Ingon

A fixed quote means you know the cost before you book. We look at:

  • The material and finish
  • Where the damage is and how we get to it
  • The type of damage
  • Any earlier repairs that need removing first

The price reflects the work involved, not your postcode. You’ll see the full price before you book.

Getting a price from photos

Before you send photos, these tips help us give you a firm price:

  • What it’s made of, if you know
  • The postcode, so we can plan the visit
  • A picture taken from further back
  • A coin or ruler next to the damage for scale

You don’t need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed quote.

Repair or replace: which is better?

The alternatives are a new textured bath or tray, or a bath mat that needs lifting and cleaning. A non-slip coating treats your existing bath or tray. There are no surprise extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.

Why us?

  • Most jobs done in one visit
  • Nothing taken out or refitted
  • We leave the room as we found it
  • Fixed prices from your pictures

Read our prices page.

When a repair isn’t the answer

We will always be straight with you, so here’s what a repair can’t fix:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Send us pictures and we’ll tell you honestly.

What we work on

  • Acrylic baths
  • Shower trays
  • Wet room floors (ask us)
  • Enamelled baths
  • Resurfaced baths

Ingon and the surrounding area

Ingon is about 2 miles north-east of Stratford-upon-Avon, in Warwickshire. Our technicians come to homes and businesses in Ingon and nearby villages, so you don’t need to take anything anywhere. Ingon is one of 324 towns and villages in Warwickshire where we work. Our jobs stretch from Ingon to Birmingham (20 miles away).

Our technicians cover all of the CV37 postcode area and the streets around it. Other places close to Ingon include Alveston (1 mile south-east), Snitterfield (2 miles north), Black Hill (2 miles north-east), Heath End (2 miles north-east) and Hampton Lucy (2 miles east). We also work in nearby towns such as Warwick (7 miles north-east), Royal Leamington Spa (9 miles north-east), Leamington Spa (8 miles north-east), Kenilworth (10 miles north-east), Southam (13 miles east) and Alcester (8 miles west).

Near you in Ingon

Our customers here include homes close to Bancroft Gardens, King Edward VI School and Former Parish Church Of St James. The closest station to Ingon is Stratford-upon-Avon station, about 1.8 miles south-west of the centre. Other landmarks nearby include Old Red Lion Shopping Centre (1.6 miles south-west) and Stratford Hospital (1.7 miles south-west).

  • Parks and local facilities nearby include Old Stratford and Drayton (2.8 miles west)
Map of Ingon © OpenStreetMap contributors

Can I fix it myself?

The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.

You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.

Landlords, agents and businesses in Ingon

Hospitality businesses can’t afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.

For developers and builders, we fix damage before handover. We can visit several plots in one trip.

Your questions about non-slip bath coating in Ingon

Will a non-slip coating change how my bath looks?

Only slightly: the treated area looks slightly matt.

Do you work in Ingon?

Yes. We cover the whole UK and travel to Ingon. Send pictures and we’ll quote, or call 0345 017 0787.

Is a non-slip bath easy to clean?

Yes. Use a soft brush and a mild cleaner.

Are there extra charges for Ingon?

Travel is included in the price, with the same prices everywhere we work.

Is repairing better than replacing?

In most cases, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we’ll tell you.

Can you price it without visiting?

Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.

What information do you need?

Some photos, your postcode and how to reach you. On the day, access to the room.

What happens if you find more damage?

If we find something the pictures didn’t show, we explain it first. The price only changes if you agree.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.