Lancashire · England
Non-Slip Bath Coating in Anchorsholme
Non-slip bath coating for Anchorsholme, without a refit. Send us photos for a fixed quote, then book a visit.
- Safety for older or less mobile people
- Resurfaced baths that are now too smooth
- A bath or tray that is slippery when wet
For landlords and businesses
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
If you manage property in Anchorsholme, we’ll quote for several properties at once. Send pictures for each one and we will price them together.
Non-slip bath coating in Anchorsholme without replacing anything
The coating is clear and textured, so it shows only as a slightly matt area where you stand. It’s popular with homes with older or less mobile people, holiday lets and families. Typical jobs include bath mats that harbour mould or get forgotten and safety for older or less mobile people, on acrylic baths, resurfaced baths and enamelled baths.
Every repair is covered by a one-year guarantee. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.
- Location
- Anchorsholme (FY5, FY2)
- Area hub
- Lancashire
- Guarantee
- One year on every repair
- Quote
- Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Other services in Anchorsholme
Where we work around Anchorsholme
Anchorsholme is about 4 miles north of Blackpool, in Lancashire. From the centre of Anchorsholme to the outlying streets, the service is the same: a fixed quote, a tidy visit and a guarantee. Anchorsholme is one of 482 places in Lancashire where we work. We work right across the region, from Anchorsholme to Liverpool (32 miles away).
We work across FY5 and FY2 and the streets around it. Local streets include Epsom Road, Luton Road and Merlyn Road, and we cover them all. Main roads around Anchorsholme include the A585, which makes travel easy. Other places close to Anchorsholme include Little Bispham (1 mile west), Norbreck (1 mile south-west), Cleveleys (1 mile north), Thornton (1 mile north-east) and Bispham (1 mile south). We also work in nearby towns such as Preston (15 miles south-east), Lytham St Anne's (8 miles south), Morecambe (15 miles north-east), Fulwood (14 miles south-east), Fleetwood (3 miles north) and Penwortham (15 miles south-east).
Near you in Anchorsholme
In Anchorsholme, that means homes near All Saints Church, Anchorsholme Primary Academy and The Jolly Tars pub and the streets around them. You will also find Devonshire Road Rock Gardens (1.5 miles south), Westcliff Primary Academy (1.1 miles south-west) and Montgomery High School (1.1 miles south). The closest station to Anchorsholme is Poulton-Le-Fylde station, roughly 2.2 miles south-east. Other landmarks nearby include Teanlowe Centre (2.2 miles south-east) and Showtime (3.9 miles south). Not far away are Marton Mere.
Can I fix it myself?
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send pictures.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
Signs you need non-slip bath coating in Anchorsholme
Baths and trays are made smooth so they’re easy to clean, yet wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.
The things customers typically mention when they call are:
- Bath mats that harbour mould or get forgotten
- Resurfaced baths that are now too smooth
- Worn-out textured areas
- Safety for older or less mobile people
Questions to ask before booking
- How changes to the job are handled
- When it can be used again
- Who will actually do the work
- How your room will be protected
What non-slip bath coating costs
Each job gets its own fixed price. These are the things that affect it:
- Unusual colours or finishes
- How easy the damage is to reach
- What kind of damage it is
- What the surface is made of
We charge the same wherever you are, with no extra for Anchorsholme. The job itself decides the price: how much damage, what it’s made of and how many items.
Quotes from your photos
Good pictures mean an accurate price. Here’s what we find most useful:
- Where you are, by postcode
- A photo taken from further back
- Any earlier repairs or coatings
- A coin or ruler next to the damage for scale
Getting a price is easy: snap the damage close up and then the whole item, send them to us with your postcode, and you will get a fixed price back. There is no charge for the quote and no obligation.
The process
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job normally takes a few hours. We tidy up before we leave and tell you when it’s ready to use.
- We clean and degrease the standing area.
- We mask out the area to be treated.
- We put on the clear non-slip coating.
- We remove the masking for a neat edge.
- The coating is left to cure before use, typically overnight.
Before we arrive
- Tell us about any previous repairs or coatings
- Have a window or extractor fan available
- Mention if the room is upstairs or in a flat
Getting a price
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath or shower tray, include your postcode and send them to us. You’ll get a fixed price, not an estimate.
Related advice
Honest limits
To be straight with you, some problems need a different fix:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
If in doubt, send photos and we will say what we think.
Materials we work on in Anchorsholme
- Wet room floors (ask us)
- Enamelled baths
- Acrylic baths
- Shower trays
- Resurfaced baths
Repairing versus replacing in Anchorsholme
Instead, you could go for replacing the bath or tray with a textured one, or a bath mat that needs lifting and cleaning. A non-slip coating treats your existing bath or tray. Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
Why choose Surface Doctor in Anchorsholme
- Repair technicians who travel to you, UK-wide
- No need to remove anything
- Rooms protected and left tidy
- Generally one visit, start to finish
Read our full price list.
FAQs for Anchorsholme
Do I have to be there?
Yes. We need access to the room while we work, at a time that suits you.
Can I add another job to the visit?
Yes. Doing several items on one visit usually costs less than separate visits. Include photos of each item.
Is my repair covered?
Every repair comes with a one-year guarantee. Ask us what it covers when you get your quote.
Can landlords book you?
Yes, often. We can quote for several properties together and work between tenancies.
Will I see the coating?
Only slightly: it shows as a matt area where you stand.
Can pets and children be at home?
Yes, as long as they stay out of the room we are working in. We’ll tell you when the room can be used again.
Can you repair something that’s been repaired before?
Yes, regularly. It can add a little time, which we include in the quote.
What do you need from me?
Some photos, your postcode and how to reach you. On the day, access to the room.
About our accreditations · Every repair comes with a one-year guarantee.
