Hull · England
Non-Slip Bath Coating in Anlaby Park
We travel to Anlaby Park for clear non-slip coatings for baths and shower trays. Nothing is taken out, and the work is guaranteed.
- Bath mats that harbour mould or get forgotten
- Resurfaced baths that are now too smooth
- Safety for older or less mobile people
Non-slip bath coating in Anlaby Park, done in place
It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. It suits homes with older or less mobile people, holiday lets and families. If you’re dealing with worn-out textured areas and a bath or tray that is slippery when wet, we can usually put it right.
Big or small, you get the same one-year guarantee in Anlaby Park and across Hull. A soft brush and mild cleaner keep it clean. Avoid scourers on the coating.
- Area
- Anlaby Park (HU4, HU5, HU10)
- County
- Hull
- Cover
- A year, on every repair
- Quotes
- Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
What non-slip bath coating costs
We price every job individually, from your photos. The main factors are:
- Access to the area
- How hard the colour is to match
- Whether we combine several jobs
- Whether old repairs or coatings need taking off
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you’ll get a fixed figure.
Send photos for a quote
Most quotes are done from pictures alone. To make it quick:
- A clear, close picture of the problem area
- Your postcode, so we can check dates
- Something in shot to show the size
- Daylight if possible, and no flash reflection
Getting a price is easy: snap the damage close up and then the whole item, send them to us with your postcode, and you’ll get a fixed price back. There’s no charge for the quote and no obligation.
Where we work around Anlaby Park
Anlaby Park is about 3 miles south-west of Kingston upon Hull, in Hull. From the centre of Anlaby Park to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. Anlaby Park is one of 22 places in Hull where we work. We work right across the region, from Anlaby Park to Leeds (47 miles away).
All of HU4, HU5 and HU10 is within our area. Streets in the area include Hull Road, Elgar Road and Orchard Road. Anlaby Park is on the A1105, so it’s easy for us to reach. Other places close to Anlaby Park include East Ella (1 mile north-east), Anlaby Common (1 mile north), Anlaby (1 mile west), Willerby (2 miles north-west) and Hessle (2 miles south-west). Within a short drive, we also cover Kingston upon Hull (3 miles north-east), Sutton-on-Hull (5 miles north-east), Kingswood (5 miles north-east), Sutton Ings (5 miles north-east), Drypool (3 miles east) and Stepney (3 miles north-east).
Around Anlaby Park
In Anlaby Park, that means homes near Rokeby Park Primary School, The Educational Hearing Service for Hearing and Vision and St. Mark, among other places. Nearby too are The Highway pub (0.9 miles north), Pickering Park (0.7 miles south-east) and Sirius Academy West (under half a mile south). Anlaby Park’s nearest station is Hessle station, about 2.1 miles south-west of the centre. Further afield, we also cover the area around Southeast Asia Museum at the University of Hull (2.8 miles north-east) and St Stephen's (2.7 miles east). For a walk, there is Far Ings National Nature Reserve.
Do you need non-slip bath coating in Anlaby Park?
Baths and trays are made smooth so they’re easy to clean, but with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.
Contact us if you’ve noticed any of these:
- Resurfaced baths that are now too smooth
- A bath or tray that is slippery when wet
- Bath mats that harbour mould or get forgotten
- Safety for older or less mobile people
Comparing quotes
- If travel is included in the price
- How to look after the finish
- Whether the price is fixed and includes VAT
- How the room is protected while they work
Repair or replace: which is better?
Instead, you could go for replacing the bath or tray with a textured one, or a bath mat, which traps water and needs cleaning. A non-slip coating adds grip to the bath you have. A repair typically costs much less than people expect, particularly next to the cost of replacement. Send pictures and we will give you the exact figure.
Why us?
- Repair technicians who travel to you, UK-wide
- Every repair guaranteed for a year
- No extra charge for your area
- We leave the room as we found it
See our pricing.
When we would advise against a repair
Some problems need a builder, plumber or fitter rather than us:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Not sure? Send photos and we will give you a straight answer.
Surfaces we repair
- Enamelled baths
- Acrylic baths
- Wet room floors (ask us)
- Shower trays
- Resurfaced baths
How the visit works
There is not much you need to do on the day. Show us the job, point us to the room, and we’ll get on with it. The job generally runs to a few hours.
- We clean and degrease the standing area.
- The area to be treated is masked out.
- We apply the clear textured coating.
- We remove the masking for a neat edge.
- We leave it to cure, typically overnight.
Before we arrive
- Ensure the area is dry
- Clear toiletries, mats and anything else from around the area
- Tell us if there are stairs or a lift
Get a quote
For a price in Anlaby Park, the easiest route is photos: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Related advice
Can I fix it myself?
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it will not stop us repairing it. It does add a little time, so tell us about it when you send photos.
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
For landlords and businesses
Hospitality businesses cannot afford rooms out of action for long, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
For anyone letting property in or around Anlaby Park, we can repair and quote for several addresses together. Just send photos for each address and we’ll come back with a combined price.
Anlaby Park: your questions answered
Can pets and children be at home?
Please keep children and pets out of the room during the visit. The rest of the house is unaffected.
Do you work in Anlaby Park?
Yes, we do. Repair technicians travel to Anlaby Park from across the region, and the price is the same as everywhere else.
Will the price change on the day?
It’s rare, but if it happens we talk to you first. The price only changes if you agree.
Can landlords book you?
Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.
Do I need to be at home?
Yes. We need access to the room while we work, at a time we agree with you.
Is repairing better than replacing?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. We will be honest if it’s not worth it.
Will it make a mess?
Dust sheets and masking go down before we start, and we clean up when we have finished.
How quickly can you book me in?
That depends on our diary for your area. Send photos with your postcode and we will reply with the earliest dates.
Towns and villages near Anlaby Park
What else we do in Anlaby Park
About our accreditations · Every repair comes with a one-year guarantee.
