Hull · England
Bath Repair for Anlaby Park homes
Problem with your bath in Anlaby Park? We put it right where it is, mix the colour on the day and back it with a one-year guarantee.
- Repairs from £95
- A cracked acrylic bath
- A chip where the taps sit
Looking after it afterwards
Aftercare is simple:
- If an acrylic bath flexes, have its feet adjusted
- Keep abrasive pads and gritty cleaners away from the bath
- Get a dripping tap fixed promptly
- Rinse it down after each bath
Clean with mild, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Get any new chip seen to quickly, before rust sets in.
Rust under enamel spreads surprisingly quickly. Left for months, a small chip can grow into a large rust patch, so early repair keeps the cost down.
Bath repair at your home in Anlaby Park
Whatever has happened to the bath, we aim for the same result: a repair that’s smooth, sound and hard to spot. We prepare the area properly, fill and shape it, then match the colour and gloss so it sits flush with the rest of the bath. We are frequently asked to fix chips caused by builders and chips under the taps, across cast iron enamel, roll-top & freestanding and acrylic.
The work is guaranteed for twelve months. If there is a problem with the repair within the year, we return and sort it.
- Location
- Anlaby Park (HU4, HU5, HU10)
- County
- Hull
- Guarantee
- 12 months on all our work
- Quotes
- From £95. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Landlord and trade work in Anlaby Park
We work for landlords, letting agents and housing providers in Anlaby Park as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
We regularly work with letting and managing agents. Send the address, photos and access details and we will handle the rest.
Signs you need bath repair in Anlaby Park
A cracked acrylic bath usually wasn’t supported properly. Loose legs, no proper cradle or a floor that gives let the bath move until the acrylic gives way.
The most common problems we’re called about are:
- A cracked acrylic bath
- Damage done while the bathroom was being fitted
- Holes from dropped items
- A chipped rim or side
Comparing quotes
- Aftercare advice
- How the colour is matched
- Whether the price covers travel
- What prep work is covered
What we do, step by step
Nothing needs to be moved out of the room beforehand. We bring everything we need with us, lay protective sheets and start once you are happy with the plan. Most jobs take a few hours, depending on the damage, and you are welcome to carry on with your day while we work.
- First, the area is cleaned and any loose enamel or rust is removed.
- We fill the damage and sand it flush with the surrounding surface.
- The colour is mixed on the spot to match your bath.
- We apply the finish coats and polish the repair so it blends in.
- Once it has cured, usually by the next day, the bath is ready to use.
Before we arrive
- Plan for the room to be out of bounds to pets and children
- Let us know which floor the room is on
- Mention any earlier repairs or resurfacing
Getting a price
For a price in Anlaby Park, the easiest route is photos: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Advice
Nearby places to Anlaby Park
More services for Anlaby Park
What we cannot put right
Some jobs are not right for a repair, for example:
- Rust that has eaten right through a steel bath
- Flexing caused by a failed cradle or loose feet
- A whole bath that is dull or worn, where a full re-enamel is the better fix
Send us pictures and we will tell you honestly before booking.
Surfaces we repair
- Roll-top & freestanding
- Cast iron enamel
- Acrylic
- Pressed steel enamel
- Whirlpool & spa baths
Should I try a DIY kit first?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
What your bath is made of matters
Cast iron
Cast iron is heavy and rigid, finished with fired enamel. A chip down to the iron can rust, but the body of the bath lasts a very long time, which makes it well worth repairing.
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, especially around the waste, so early repairs matter.
Anlaby Park questions
Is a bath repair durable?
A properly prepared repair should last a long time, and it’s guaranteed for a year. Gentle cleaning helps it last.
Is my repair covered?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Is it OK to have pets in the house?
Keep pets and children away from the work area on the day, so the repair isn’t disturbed while it cures.
When can I have a bath again?
Generally within a day, though it depends on what we have done.
Do you charge for travel?
We don’t add a call-out fee. Your fixed quote includes everything.
Can you match an avocado or pink bath?
Yes, we match coloured baths too. The colour is tinted by hand on the day.
Can you do more than one item on the same visit?
Yes. Doing several items on one visit generally costs less than separate visits. Include pictures of each item.
Can tenants book a repair?
Yes, though it’s best to check with your landlord first. Landlords are frequently glad to have it sorted before the end of a tenancy.
Repair or replace: which is better?
Think about the hidden costs of a new bath: removal and disposal, plumbing, a new panel, tiling and decorating. With a repair, it’s one visit and one price. Prices start from £95. Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access, and combining items on one visit brings it down.
Why choose Surface Doctor in Anlaby Park
- We come to you, anywhere in the UK
- One-year guarantee on every repair
- We will tell you if it’s not worth repairing
- Colours mixed by hand to suit your surface
Take a look at our full price list and resurfacing vs replacement cost guide.
Where we work around Anlaby Park
Anlaby Park is about 3 miles south-west of Kingston upon Hull, in Hull. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. Anlaby Park is one of 22 places in Hull we cover. You can also see our page for Leeds, about 47 miles away.
Jobs in HU4, HU5 and HU10 are booked in the same way as anywhere else. Local streets include Hull Road, Elgar Road and Orchard Road, all of which we cover. Anlaby Park is on the A1105, which makes it straightforward to reach. Other places close to Anlaby Park include East Ella (1 mile north-east), Anlaby Common (1 mile north), Anlaby (1 mile west), Willerby (2 miles north-west) and Hessle (2 miles south-west). Larger places within reach include Kingston upon Hull (3 miles north-east), Sutton-on-Hull (5 miles north-east), Kingswood (5 miles north-east), Sutton Ings (5 miles north-east), Drypool (3 miles east) and Stepney (3 miles north-east).
Local landmarks in Anlaby Park
We visit homes around Rokeby Park Primary School, The Educational Hearing Service for Hearing and Vision and St. Mark and the streets around them. You will also find The Highway pub (0.9 miles north), Pickering Park (0.7 miles south-east) and Sirius Academy West (under half a mile south). The nearest railway station is Hessle station, roughly 2.1 miles south-west. Nearby you’ll also find Southeast Asia Museum at the University of Hull (2.8 miles north-east) and St Stephen's (2.7 miles east). The countryside around Anlaby Park includes Far Ings National Nature Reserve.
About our accreditations · Every repair comes with a one-year guarantee.
