Gloucestershire · England
Non-Slip Bath Coating for Arle homes
Fixed-price non-slip bath coating in Arle and the surrounding area, done in a single visit in most cases and guaranteed for a year.
- Resurfaced baths that are now too smooth
- Bath mats that harbour mould or get forgotten
- Safety for older or less mobile people
Non-slip bath coating in Arle without replacing anything
It’s popular with older people, families and holiday lets. It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. Our repair technicians work on wet room floors (ask us), enamelled baths and resurfaced baths, and people most often call us about bath mats that harbour mould or get forgotten and resurfaced baths that are now too smooth.
All of our repairs are guaranteed for twelve months, and the guarantee is the same wherever you live. If something goes wrong with the work, we come back. A soft brush and mild cleaner keep it clean. Do not use abrasive pads on the textured area.
- Location
- Arle (GL51, GL50)
- Region
- Gloucestershire
- Cover
- A year, on every repair
- Quotes
- Fixed and free, based on photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Our work in Arle
Arle is about 1 mile west of Cheltenham, in Gloucestershire. Whether you are in the middle of Arle or on the outskirts, we offer exactly the same service: a fixed price, a tidy visit and a guarantee. We work in all 470 towns and villages across Gloucestershire. We work right across the region, from Arle to Birmingham (about 40 miles away).
Postcode districts we cover here: GL51 and GL50. You will find streets such as Chad Road, Byron Road and Dowty Road, and we cover them all. You’ll find Arle on the A4013, so it’s easy for us to reach. Other places close to Arle include St Mark’s (1 mile east), Rowanfield (1 mile north-east), Hesters Way (1 mile north-west), Hayden (1 mile north-west) and Uckington (2 miles north). Larger places within reach include Gloucester (6 miles south-west), Stroud (12 miles south-west), Tewkesbury (6 miles north), Cirencester (14 miles south-east), Bishop's Cleeve (4 miles north-east) and Brockworth (4 miles south-west).
Around Arle
Around Arle, we work in homes near Gloucestershire College, Rowanfield Junior School and The Park and the streets around them. You will also find The Umbrella pub (0.6 miles north), Church of St Mark (under half a mile south-east) and Pate's Grammar School (0.6 miles north-west). Arle’s nearest station is Cheltenham Spa station, about 0.5 miles south-east of the centre. Well-known places in the area include Emmas Grove (4 miles south) and Cheltenham Battlefield Crosses Museum (1.5 miles east). Open spaces near Arle include Chosen Hill.
Can I fix it myself?
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send photos, as it can add time.
Prices and what affects them
Each job gets its own fixed quote. These are the things that affect it:
- The material and finish
- Whether it’s a chip, crack, burn or wear
- Whether we combine several jobs
- Where the damage is and how we get to it
The price reflects the work involved, not your postcode. The full price is agreed before booking.
Quotes from your photos
It only takes a minute to photograph the damage, and it saves a visit. Please include:
- Natural light rather than flash
- A picture taken from further back
- The postcode, so we can plan the visit
- A coin beside the damage so we can judge size
Send us a photo of the damage and a wider shot of the entire item, with your GL51 postcode, and we’ll reply with a fixed price.
Also in Arle
When we’d advise against a repair
We will not take on work that will not last, so these are the limits:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Send us photos and we’ll tell you honestly before you book.
Surfaces we repair
- Enamelled baths
- Acrylic baths
- Resurfaced baths
- Shower trays
- Wet room floors (ask us)
For landlords and businesses
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
If you manage property in Arle, we’ll quote for several properties at once. Send photos for each one and we will come back with a combined price.
The process
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, cover and mask the work area, and get on with the job, which typically takes a few hours. If we find something your pictures didn’t show, we’ll explain it before carrying on.
- We start by degreasing the area where you stand.
- Next we mask off the area.
- We apply the clear textured coating.
- The masking comes off to leave a neat edge.
- We leave it to cure, typically overnight.
Preparing for the visit
- Ensure the area is dry
- Make sure the room can be ventilated
- Keep a parking space free if you can
Getting a price
You do not need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Related advice
Repair or replace: which is better?
The alternatives are replacing the bath or tray with a textured one, or a bath mat that needs lifting and cleaning. A coating adds grip to the bath you have. No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
Why choose Surface Doctor in Arle
- Usually one visit, start to finish
- Nothing taken out or refitted
- Free fixed quotes from pictures
- We come to you, anywhere in the UK
Take a look at our prices page.
Common problems we fix in Arle
Baths and trays are made smooth so they’re easy to clean, but wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.
Look out for these signs:
- Resurfaced baths that are now too smooth
- Worn-out textured areas
- Safety for older or less mobile people
- A bath or tray that is slippery when wet
Comparing quotes
- What happens if the damage is worse than the photos show
- How your room will be protected
- What prep work is covered
- A fixed quote, and whether VAT is included
Arle questions
Do you do work for letting agents?
Yes, frequently. We can quote for several properties together and work between tenancies.
Can you quote from photos?
Yes, almost always. A close-up and a wider photo are enough to give a fixed price.
How do I get a price for non-slip bath coating in Arle?
We give a fixed quote based on pictures of the damage. Send a close-up of the damage and a wider photo and your postcode.
How do I book?
Send photos through the quote form or call 0345 017 0787, and we’ll take it from there.
Is it worth repairing rather than replacing?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. We will be honest if it’s not worth it.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Will there be a smell?
It depends on the job, but frequently a little. Ventilation keeps it to a minimum, and it soon fades.
Is it messy?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
About our accreditations · Every repair comes with a one-year guarantee.
