Leicestershire · England
Non-Slip Bath Coating for Aston Flamville homes
Clear non-slip coatings for baths and shower trays for householders, landlords and businesses in Aston Flamville. Send photos for a free, fixed quote.
- A bath or tray that is slippery when wet
- Worn-out textured areas
- Resurfaced baths that are now too smooth
Questions from Aston Flamville
Is my repair covered?
All our work carries a one-year guarantee. Ask us what it covers when you get your quote.
What happens once I’ve sent photos?
We look at the photos and reply with a fixed price and some dates. If anything’s unclear, we will ask for another photo.
How much does non-slip bath coating cost in Aston Flamville?
We give a fixed price from your photos. Send a close-up and a photo of the whole item and your postcode.
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
Can you do more than one item on the same visit?
Yes, and it’s frequently cheaper. Just add the extra items to your photos and you will get one combined price.
Do you do work for letting agents?
Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.
Will there be a smell?
There may be a mild smell during the work that clears as it cures.
Do you cover the entire of Leicestershire?
Across the UK, so Aston Flamville is covered. Prices don’t change with location.
Non-slip bath coating in Aston Flamville without replacing anything
It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. It’s popular with older people, families and holiday lets. We’re often asked to fix bath mats that harbour mould or get forgotten and a bath or tray that is slippery when wet, in resurfaced baths, enamelled baths and shower trays.
All our work is covered by a one-year guarantee. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.
- Area
- Aston Flamville (LE10)
- Region
- Leicestershire
- Guarantee
- A year, on every repair
- Quotes
- Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Prices and what affects them
We price every job individually, from your photos. The main factors are:
- Whether old repairs or coatings need taking off
- How many areas need work
- How easy the damage is to reach
- Whether it’s a chip, crack, burn or wear
A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send photos and you will get a fixed figure.
Send pictures for a quote
Before you send pictures, a few simple things make all the difference:
- Where you are, by postcode
- What it’s made of, if you know
- A wider photo showing the entire bath or shower tray
- A coin beside the damage so we can judge size
The quickest way to a price is to send two or three photos through our quote form or call us. We’ll tell you honestly whether it can be repaired.
Work for landlords and builders
Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so most of our work is done in a single visit. We will fit around changeovers where we can.
Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit to keep costs down.
What a repair can’t fix
Honesty matters more than a booking, so here’s what a repair can’t fix:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Not sure? Send photos and we will give you a straight answer before you book.
What we work on
- Wet room floors (ask us)
- Resurfaced baths
- Shower trays
- Acrylic baths
- Enamelled baths
DIY kit or professional repair?
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and do not use it until it has fully cured. If it fails, we can still put it right.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
How the visit works
We work cleanly and quietly, so you can carry on at home. We protect the area first, then the job itself takes a few hours. At the end we talk you through the curing time and the aftercare.
- We clean and degrease the standing area.
- The area to be treated is masked out.
- The clear textured coating is applied.
- The masking comes off to leave a neat edge.
- The coating is left to cure before use, normally overnight.
How to prepare
- Let us know if it has been repaired before
- Keep pets and children out of the room while we work
- Mention if the room is upstairs or in a flat
Get a quote
You do not need a survey visit. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
Advice
Aston Flamville and nearby
Aston Flamville is about 2 miles east of Hinckley, in Leicestershire. Clients in Aston Flamville get the same service as everywhere else we cover: a fixed quote from pictures, then a visit to do the work. We cover all 287 towns and villages in Leicestershire. Our jobs stretch from Aston Flamville to Birmingham (about 24 miles away).
Here we cover the LE10 postcode area. From Hinckley Road and Lychgate Lane or a nearby road, a technician can come to you. Close by, we cover Burbage (1 mile west), Smockington (2 miles south), Elmesthorpe (2 miles north), Sketchley (2 miles west) and Hinckley (2 miles west). Within a short drive, we also cover Wigston (10 miles east), Coalville (13 miles north), Syston (15 miles north-east), Lutterworth (7 miles south-east), Blaby (7 miles east) and Broughton Astley (4 miles east).
Around Aston Flamville
Our clients here include homes close to Church of St Peter and Hastings High School and the streets around them. The closest station to Aston Flamville is Hinckley station, roughly 2.2 miles west. Other landmarks nearby include Hinckley and District Museum (2.4 miles west). Not far away are Stoney Cove and Croft Hill.
Also near Aston Flamville
Other services in Aston Flamville
Common problems we fix in Aston Flamville
Smooth surfaces are easy to clean, but wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.
Most people contact us after spotting one of these:
- Bath mats that harbour mould or get forgotten
- Safety for older or less mobile people
- A bath or tray that is slippery when wet
- Resurfaced baths that are now too smooth
Comparing quotes
- What happens if the damage is worse than the photos show
- What protection goes down before work starts
- Whether the price covers travel
- Is the price fixed, and does it include VAT?
Repairing versus replacing in Aston Flamville
The alternatives are replacing the bath or tray with a textured one, or a bath mat that needs lifting and cleaning. A non-slip coating treats your existing bath or tray. The price depends on the type and amount of damage, the material and how many items we do on one visit. You get a fixed price from your photos, so you know the cost before booking.
Why book with us
- No extra charge for your area
- We will tell you if it’s not worth repairing
- One-year guarantee on every repair
- CHAS, Constructionline and SafeContractor accredited
Take a look at our prices page.
About our accreditations · Every repair comes with a one-year guarantee.
