Dorset · England
Non-slip bath & shower coating in Atrim, Dorset
Non-slip bath coating in and around Atrim: photo quotes, tidy work and a year’s guarantee.
- A bath or tray that is slippery when wet
- Resurfaced baths that are now too smooth
- Bath mats that harbour mould or get forgotten
Why repair rather than replace?
Instead, you could go for a new textured bath or tray, or relying on a mat that needs lifting and cleaning. A coating treats your existing bath or tray. Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access, and doing several items at once reduces it.
What you get with us
- We’ll tell you if it’s not worth repairing
- No extra charge for your area
- Free fixed quotes from pictures
- Everything repaired in place
See our full price list.
Non-slip bath coating in Atrim, done in place
It’s popular with older people, families and holiday lets. The coating is clear and textured, so the bath looks much the same. If you are dealing with bath mats that harbour mould or get forgotten and safety for older or less mobile people, we can help, whatever the material.
We stand behind the work with a one-year guarantee, so you’re not left on your own once we’ve gone. A soft brush and mild cleaner keep it clean. Do not use abrasive pads on the textured area.
- Where
- Atrim (DT6)
- Region
- Dorset
- Warranty
- 12 months on all our work
- Quote
- Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Towns and villages near Atrim
Other services in Atrim
What a repair cannot fix
We will not take on work that will not last, so these are the limits:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Send us photos and we will tell you honestly before you book.
Materials we work on in Atrim
- Wet room floors (ask us)
- Resurfaced baths
- Acrylic baths
- Enamelled baths
- Shower trays
Should I try a DIY kit first?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
Landlords, agents and businesses in Atrim
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Our work in Atrim
Atrim is about 2 miles north-west of Bridport, in Dorset. Clients in Atrim get the same service as everywhere else we cover: a fixed quote from photos, and a technician at your door on the day. We cover all 462 towns and villages in Dorset.
We cover every part of the DT6 postcode area and the streets around it. We also travel to Symondsbury (1 mile south), Dottery (1 mile north-east), Miles Cross (1 mile south), Allington (1 mile south-east) and Salway Ash (1 mile north-east). Larger places within reach include Dorchester (15 miles east), Lyme Regis (7 miles west), Chickerell (15 miles south-east), Beaminster (5 miles north-east), Charminster (14 miles east) and Charmouth (5 miles west).
What’s near Atrim
Typical jobs here are in homes near Symondsbury Parish Church (St John the Baptist), Symondsbury Church of England Voluntary Aided Primary School and The Sir John Colfox Academy. A little further out are Marshwood Castle (3 miles north-west) and Chideock and Seatown Museum (1.6 miles south-west). Not far away are Thorncombe Beacon.
How we price non-slip bath coating
We give every job a fixed quote from photos. This is what makes a difference:
- The material and finish
- How easy the damage is to reach
- How many areas need work
- The type of damage
No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
Quotes from your photos
Almost every job we do is priced from pictures. This is what to send:
- Natural light rather than flash
- Any earlier repairs or coatings
- One picture of the whole bath or shower tray
- Any details about the material
Upload a photo of the damage and a wider shot of the entire item, and tell us you are in Atrim, and we’ll reply with a fixed quote.
What happens on the day
Expect a friendly, tidy visit. We agree the arrival time in advance, protect the area, then carry out the work, which normally takes a few hours. If anything looks different from your pictures, we will talk to you before going ahead.
- First the standing area is cleaned and degreased.
- Next we mask off the area.
- We put on the clear non-slip coating.
- We lift the masking for a clean edge.
- Once it has cured, normally overnight, it’s ready.
Preparing for the visit
- Let us know if it has been repaired before
- Make sure the area is dry
- Have a window or extractor fan available
Get a quote
You do not need a survey visit. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Advice
Atrim: your questions answered
Is it messy?
Dust sheets and masking go down before we start, and we clean up when we’ve finished.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Is there any odour?
It depends on the job, but frequently a little. Open windows and an extractor fan help, and it soon fades.
Is a non-slip bath easy to clean?
Yes. A soft brush and mild cleaner is all it needs.
How do I book?
A close-up, a wider photo and your postcode. After that, we just agree a date.
What happens after I send pictures?
We come back with a fixed quote, plus dates. There is no obligation to book.
Is there a call-out fee?
We don’t add a call-out fee. Your fixed quote includes everything.
Will I see the coating?
Only slightly: the treated area looks slightly matt.
Common problems we fix in Atrim
Smooth surfaces are easy to clean, but wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.
People generally call us after spotting one of these:
- A bath or tray that is slippery when wet
- Bath mats that harbour mould or get forgotten
- Worn-out textured areas
- Resurfaced baths that are now too smooth
Questions to ask before you book
- The length of the guarantee and what it covers
- How to care for the finish
- How long it needs to cure
- What protection goes down before work starts
About our accreditations · Every repair comes with a one-year guarantee.
