Hampshire · England
Non-slip bath & shower coating in Axmansford, Hampshire
Fixed-price non-slip bath coating in Axmansford and the surrounding area, done in a single visit in most cases and guaranteed for a year.
- Bath mats that harbour mould or get forgotten
- Worn-out textured areas
- A bath or tray that is slippery when wet
About our non-slip bath coating in Axmansford
It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. It’s popular with older people, families and holiday lets. Typical jobs include worn-out textured areas and bath mats that harbour mould or get forgotten, across resurfaced baths, enamelled baths and acrylic baths.
All our work is covered by a one-year guarantee, wherever you are in Hampshire. A soft brush and mild cleaner keep it clean. Avoid scourers on the coating.
- Area
- Axmansford (RG26)
- Region
- Hampshire
- Guarantee
- A year, on every repair
- Price
- Free and fixed, from your photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Axmansford and the surrounding area
Axmansford is about 2 miles west of Tadley, in Hampshire. Anywhere in RG26, we come to you. Axmansford is one of 683 towns and villages in Hampshire where we work. Our jobs stretch from Axmansford to London (about 48 miles away).
Every address in RG26 is within our area, from the main roads to the quietest streets. Close by, we cover Inhurst (1 mile north), Baughurst (1 mile north-east), Heath End (1 mile north-east), Wolverton Common (1 mile south-west) and Brimpton Common (1 mile north). We also work in nearby towns such as Basingstoke (7 miles south-east), Yateley (15 miles east), Hook (11 miles south-east), Popley (6 miles south-east), Kempshott (7 miles south) and Oakridge (7 miles south-east).
Local landmarks in Axmansford
Around Axmansford, we work in homes near The Hurst School, The Hurst School and Church of St Stephen, among other places. You’ll also find Ashford Hill Primary School (1.2 miles north-west) and Wellington Arms Public House (0.9 miles south-east). The nearest railway station is Midgham station, roughly 3.4 miles north of the centre. Nearby you will also find Park Prewett Hospital (5.3 miles south-east) and Calleva Museum (3.6 miles east).
Should I try a DIY kit first?
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is generally the cheaper route.
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
Honest limits
Not everything can be repaired, and we’ll tell you before we start. We cannot fix:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Not sure? Send photos and we’ll give you a straight answer.
Materials we repair
- Enamelled baths
- Shower trays
- Acrylic baths
- Resurfaced baths
- Wet room floors (ask us)
For landlords and businesses
Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit.
Letting agents frequently send us photos straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
What happens on the day
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job typically takes a morning or an afternoon. We tidy up before we leave and tell you when it’s ready to use.
- First the standing area is cleaned and degreased.
- The area to be treated is masked out.
- We put on the clear non-slip coating.
- The masking comes off to leave a neat edge.
- Once it has cured, normally overnight, it’s ready.
Before we arrive
- Let us know which floor the room is on
- Mention any earlier repairs or resurfacing
- Have a window or extractor fan available
Get a quote
Pricing is simple: take a close-up of the damage and a photo from further back, send them over with your postcode, and you will get a fixed price back. There’s no charge for the quote and no obligation.
Read more
Towns and villages near Axmansford
Also in Axmansford
How we price non-slip bath coating
You’ll know the full cost before booking. We take into account:
- How hard the colour is to match
- The material and finish
- Whether it’s a chip, crack, burn or wear
- Any earlier repairs that need removing first
We charge the same wherever you are, so there’s no premium for Axmansford. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Send photos for a quote
Photographing the damage takes a minute. Please include:
- Your postcode, so we can check dates
- A close-up of the damage, in focus
- One picture of the whole bath or shower tray
- Daylight if possible, and no flash reflection
A quote takes minutes to ask for: photograph the damage, then the whole bath or shower tray, add your postcode and send them to us. You will get a fixed quote, not an estimate.
Should you replace it?
Instead, you could go for replacing the bath or tray with a textured one, or a bath mat, which traps water and needs cleaning. A non-slip coating treats your existing bath or tray. A repair is priced on what needs doing, not where you live. You will see the full price before booking, with nothing added on the day.
Why choose Surface Doctor in Axmansford
- Technicians who travel to you, UK-wide
- A year’s guarantee on all work
- Nothing taken out or refitted
- Straight answers about what a repair can do
Read our prices page.
When to call us in Axmansford
Smooth surfaces are easy to clean, but with soap and water on them they become slippery. Textured areas on older baths wear smooth too.
The things clients typically mention when they call include:
- Safety for older or less mobile people
- Resurfaced baths that are now too smooth
- Worn-out textured areas
- Bath mats that harbour mould or get forgotten
Questions to ask before booking
- How to care for the finish
- Whether the price is fixed and includes VAT
- Whether there are any call-out or travel charges
- How long it needs to cure
Your questions about non-slip bath coating in Axmansford
I rent my home. Can I book you?
Yes. Check with your landlord; we can send the quote to them too.
Can you quote from photos?
Typically, yes. Clear pictures let us give you a fixed price without visiting.
When can you do it?
It depends on the time of year and where you are. Send photos with your postcode and we will reply with the earliest dates.
Will a non-slip coating change how my bath looks?
Only slightly: it shows as a matt area where you stand.
Do you come to Axmansford?
Yes, we do. Technicians travel to Axmansford from across the region, with no extra charge for travel.
Can I add another job to the visit?
Yes. Doing several items on one visit normally costs less than separate visits. Send photos of everything you’d like done.
What areas do you cover?
Everywhere in the UK, Axmansford included. Travel is included in the price.
It’s been repaired before. Can you still fix it?
Yes, we often do. It can add a little time, which we include in the quote.
About our accreditations · Every repair comes with a one-year guarantee.
