Hampshire · England
Non-Slip Bath Coating for Wolverton Common homes
Our technicians come to Wolverton Common for clear non-slip coatings for baths and shower trays. Nothing is taken out, and the work is guaranteed.
- A bath or tray that is slippery when wet
- Worn-out textured areas
- Bath mats that harbour mould or get forgotten
About our non-slip bath coating in Wolverton Common
It’s popular with homes with older or less mobile people, holiday lets and families. It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. Our repair technicians work on shower trays, wet room floors (ask us) and enamelled baths, and common reasons people contact us are resurfaced baths that are now too smooth and safety for older or less mobile people.
You’re covered after we leave: our one-year guarantee applies to every job, and we’ll explain exactly what it covers when we quote. Clean with a soft brush and a mild cleaner. Don’t use abrasive pads on the textured area.
- Where
- Wolverton Common (RG26)
- County
- Hampshire
- Warranty
- One year on every repair
- Quote
- Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Should I try a DIY kit first?
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it won’t stop us repairing it. Just mention it when you send photos, as it can add time.
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and do not use it until it has fully cured. If it fails, we can still put it right.
What non-slip bath coating costs
A fixed quote means you know the cost before booking. We take into account:
- Doing more than one item at once
- Whether old repairs or coatings need taking off
- How easy the damage is to reach
- How much damage there is
A repair generally costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
Send photos for a quote
Most quotes are done from pictures alone. To make it quick:
- A wider photo showing the whole bath or shower tray
- Good light, ideally daylight, without flash glare
- Details of any past repairs
- A coin beside the damage so we can judge size
The quickest way to a price is to send a couple of photos using our quote form or ring us. We’ll tell you honestly if a repair is the right fix.
Towns and villages near Wolverton Common
Other services in Wolverton Common
Wolverton Common and nearby
Wolverton Common is about 3 miles south-west of Tadley, in Hampshire. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Wolverton Common is one of 683 places in Hampshire where we work. We work right across the region, from Wolverton Common to London (49 miles away).
Here we cover the RG26 postcode area. That includes homes on Wolverton Road and Holt Lane and the roads around them. Neighbouring places we cover include Townsend (1 mile south), Axmansford (1 mile north-east), Inhurst (2 miles north-east), Baughurst (2 miles north-east) and Heath End (2 miles north-east). Further out, we also cover Basingstoke (6 miles south-east), Andover (15 miles south-west), Tadley (3 miles north-east), Hook (11 miles east), Popley (6 miles south-east) and Kempshott (7 miles south).
What’s near Wolverton Common
We visit homes around The Hurst School, Church of St Catherine and The George And Dragon Public House, among other places. For rail, the closest station is Midgham station, about 4.4 miles north. Nearby you’ll also find Park Prewett Hospital (5 miles south-east).
When a repair is not the answer
Before booking, it’s worth knowing the limits too:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Not sure? Send photos and we’ll give you a straight answer.
Materials we repair
- Shower trays
- Resurfaced baths
- Acrylic baths
- Enamelled baths
- Wet room floors (ask us)
The process
There’s not much you need to do on the day. Let us in and show us the room, and we will take it from there. Most visits take a few hours, including clearing up.
- First the standing area is cleaned and degreased.
- Next we mask off the area.
- We apply the clear textured coating.
- We lift the masking for a clean edge.
- We leave it to cure, normally overnight.
Preparing for the visit
- Mention any earlier repairs or resurfacing
- Ensure the room can be ventilated
- Point us to the nearest place to park
Getting a price
There is no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Related advice
Do you need non-slip bath coating in Wolverton Common?
Smooth surfaces are easy to clean, yet wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.
It’s worth getting a quote if you see:
- Resurfaced baths that are now too smooth
- A bath or tray that is slippery when wet
- Bath mats that harbour mould or get forgotten
- Worn-out textured areas
Before booking anyone
- How your room will be protected
- What happens if the damage is worse than the photos show
- Whether there are any call-out or travel charges
- Whether they match the colour on site
For landlords and businesses
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
For developers and builders, we fix damage before handover, saving last-minute replacements. We can visit several plots in one trip to keep costs down.
Your questions about non-slip bath coating in Wolverton Common
How do I get a price for non-slip bath coating in Wolverton Common?
Because every job differs, we price from photos. You will get a fixed figure before you book.
Is a repair better than a new one?
Usually, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.
Can I add another job to the visit?
Yes. Doing several items on one visit normally costs less than separate visits. Send photos of everything you’d like done.
How do I clean it?
Yes. Use a soft brush and a mild cleaner.
What happens after I send pictures?
We look at the photos and reply with a fixed price and some dates. If anything’s unclear, we will ask for another photo.
Will a non-slip coating change how my bath looks?
Very little: it shows as a matt area where you stand.
Is my repair covered?
Every repair comes with a one-year guarantee. We will explain what it covers when we quote.
I rent my home. Can I book you?
Of course. Ask your landlord first, and we can send them the quote if that helps.
Should you replace it?
The alternatives are replacing the bath or tray with a textured one, or relying on a mat, which traps water and needs cleaning. A non-slip coating adds grip to the bath you have. What it costs depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. We give a fixed quote from your photos, so there are no surprises on the day.
What you get with us
- No extra charge for your area
- Everything repaired in place
- Free fixed quotes from pictures
- CHAS and Constructionline accredited
Take a look at our pricing.
About our accreditations · Every repair comes with a one-year guarantee.
