North Yorkshire · England
Non-slip bath & shower coating in Baldersby St James, North Yorkshire
Non-slip bath coating across Baldersby St James and nearby, normally in one visit and guaranteed for a year.
- Safety for older or less mobile people
- Resurfaced baths that are now too smooth
- Bath mats that harbour mould or get forgotten
When we would advise against a repair
Some problems need a builder, plumber or fitter rather than us:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Not sure? Send photos and we’ll give you a straight answer before you book.
What we work on
- Wet room floors (ask us)
- Enamelled baths
- Shower trays
- Resurfaced baths
- Acrylic baths
How we handle non-slip bath coating in Baldersby St James
It’s popular with older people, families and holiday lets. It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. Typical jobs include bath mats that harbour mould or get forgotten and a bath or tray that is slippery when wet, on resurfaced baths, acrylic baths and shower trays.
All our work comes with our one-year guarantee. Clean with a soft brush and a mild cleaner. Do not use abrasive pads on the textured area.
- Area
- Baldersby St James (YO7)
- Area hub
- North Yorkshire
- Warranty
- A year, on every repair
- Price
- Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Also near Baldersby St James
Other services in Baldersby St James
Signs you need non-slip bath coating in Baldersby St James
Baths and trays are made smooth so they’re easy to clean, but wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.
If you can see any of these, send us a picture:
- Bath mats that harbour mould or get forgotten
- Worn-out textured areas
- A bath or tray that is slippery when wet
- Resurfaced baths that are now too smooth
Questions to ask before booking
- Who turns up on the day
- What prep work is covered
- When it can be used again
- How to care for the finish
Repair or replace: which is better?
Instead, you could go for a new textured bath or tray, or a bath mat, which traps water and needs cleaning. A non-slip coating treats your existing bath or tray. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send photos and you will get a fixed figure.
Why us?
- Technicians who travel to you, UK-wide
- Free fixed quotes from pictures
- Typically one visit, start to finish
- CHAS and Constructionline accredited
Take a look at our full price list.
The process
There is not much you need to do on the day. Show us the job, point us to the room, and we’ll get on with it. The job generally runs to a morning or an afternoon.
- First the standing area is cleaned and degreased.
- The area to be treated is masked out.
- We put on the clear non-slip coating.
- The masking comes off to leave a neat edge.
- We leave it to cure, typically overnight.
Preparing for the visit
- Make sure the room can be ventilated
- Keep a parking space free if you can
- Let us know which floor the room is on
Get a quote
Email us a photo of the damage and one of the whole item, with your YO7 postcode, and we’ll reply with a fixed quote.
Read more
Covering Baldersby St James
Baldersby St James is about 5 miles north-east of Ripon, in North Yorkshire. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We cover all 626 towns and villages in North Yorkshire, from the larger towns to small villages. Our jobs stretch from Baldersby St James to Leeds (26 miles away).
Every address in YO7 is within our area, from the main roads to the quietest streets. If you are just outside Baldersby St James, we cover Rainton (1 mile south), Melmerby (2 miles west), Dishforth (3 miles south-east), Copt Hewick (4 miles south-west) and Marton-le-Moor (4 miles south). Further out, we also cover Harrogate (14 miles south), Knaresborough (12 miles south), Ripon (5 miles south-west), Northallerton (11 miles north), Starbeck (13 miles south) and Thirsk (5 miles north-east).
Local landmarks in Baldersby St James
Our customers here include homes close to Baldersby St James Church of England Primary School and Church of St James. The nearest railway station is Thirsk station, roughly 4.1 miles north-east of the centre. Nearby you will also find Hutton Conyers Castle (3.2 miles south-west) and Ripon Community Hospital (4.9 miles south-west).
Landlord and trade work in Baldersby St James
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Landlords, letting agents and housing providers in Baldersby St James use us as well as householders. Repairing between tenancies keeps void periods short, and it usually costs far less than a refit.
DIY kit or professional repair?
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
Common questions in Baldersby St James
Can tenants book a repair?
Yes. Ask your landlord first, and we can send them the quote if that helps.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Do you work in Baldersby St James?
We do. Repair technicians travel to Baldersby St James from across the region, with no extra charge for travel.
Can you quote from pictures?
Yes, almost always. A close-up and a wider photo are enough to give a fixed price.
Is repairing better than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. If it is not worth repairing, we will tell you.
Is a non-slip bath easy to clean?
Yes. Use a soft brush and a mild cleaner.
Is there any odour?
Expect a mild smell while we’re working.
Is there a guarantee?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
What non-slip bath coating costs
You will not pay by the hour. The price is based on:
- How much damage there is
- Where the damage is and how we get to it
- How many items we do on one visit
- What the surface is made of
A repair typically costs much less than people expect, particularly next to the cost of replacement. Send pictures and we’ll give you the exact figure.
Getting a price from photos
Most quotes are done from photos alone. To help us price it:
- A close-up of the damage, in focus
- The material, if you know it
- Details of any past repairs
- Your postcode, so we can check dates
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath or shower tray, include your postcode and send them over. What comes back is a fixed price, not a guess.
About our accreditations · Every repair comes with a one-year guarantee.
