Southend-on-Sea · England

Non-Slip Bath Coating in Barling

Clear non-slip coatings for baths and shower trays at your home in Barling, with a one-year guarantee on every repair.

  • Safety for older or less mobile people
  • Resurfaced baths that are now too smooth
  • Bath mats that harbour mould or get forgotten
Surface Doctor technician refinishing the outside of a roll-top bath

Book non-slip bath coating in Barling

About Barling

Barling is about 2 miles north of Shoeburyness, in Southend-on-Sea. We travel to customers in Barling and nearby villages, so nothing has to leave your home. Barling is one of 16 towns and villages in Southend-on-Sea where we work. Our jobs stretch from Barling to London (about 38 miles away).

Our visits in SS3 work the same way as everywhere else we cover. Jobs here include addresses on Church Road and Little Wakering Road and the roads around them. Close by, we cover Little Wakering (1 mile south), Stonebridge (1 mile south-west), Paglesham (2 miles north), North Shoebury (2 miles south) and Great Stambridge (2 miles north-west). Larger places within reach include Southend-on-Sea (4 miles south-west), Prittlewell (4 miles south-west), Leigh-on-Sea (6 miles west), Westcliff-on-Sea (5 miles south-west), Southchurch (3 miles south-west) and Chalkwell (5 miles south-west).

Near you in Barling

Locally, our jobs take us to homes close to The Castle Inn, Barling Magna Primary Academy and Church of All Saints and the streets around them. The nearest railway station is Thorpe Bay station, about 2.6 miles south-west. Other landmarks nearby include Rayleigh Windmill Museum (3.4 miles west) and Southend University Hospital (4.4 miles west). Not far away are Lion Creek and Lower Raypits.

Map of Barling © OpenStreetMap contributors

Non-slip bath coating at your home in Barling

It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. It’s popular with homes with older or less mobile people, holiday lets and families. Typical jobs include a bath or tray that is slippery when wet and resurfaced baths that are now too smooth, in shower trays, wet room floors (ask us) and enamelled baths.

We guarantee the work for a year. If there is a problem with the repair within the year, we return and sort it. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.

Location
Barling (SS3)
Region
Southend-on-Sea
Cover
A year, on every repair
Quotes
Free, fixed quote from pictures
Call
0345 017 0787
Updated
23 October 2026
Discoloured square shower tray restored with a new white finish

The process

Visits start with a quick look at the job together. After that, protection goes down around the work area and the work begins. Allow a few hours, and we will keep you posted as we go.

  1. First the standing area is cleaned and degreased.
  2. The area to be treated is masked out.
  3. The clear textured coating is applied.
  4. We lift the masking for a clean edge.
  5. Once it has cured, normally overnight, it’s ready.

Preparing for the visit

  • Mention if the room is upstairs or in a flat
  • Make sure the room can be ventilated
  • Keep a parking space free if you can

Getting a price

Getting a price is easy: take a close-up of the damage and a picture from further back, send them to us with your postcode, and you will get a fixed quote back. There’s no charge for the quote and you are under no obligation.

Get a free quote

Read more

Questions from Barling

Do you cover the whole of Southend-on-Sea?

Everywhere in the UK, Barling included. Travel is included in the price.

Can you repair several things at once?

Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.

What do you need from me?

Use the quote form or ring 0345 017 0787.

Do I have to be there?

We need someone to let us in. You don’t need to watch us work.

Do you do work for letting agents?

Yes. We work for landlords, agents, builders and businesses as well as householders.

Is it worth repairing rather than replacing?

Typically, if the item is otherwise sound. A repair avoids removal and making good. We will tell you honestly if replacement makes more sense.

Is a non-slip bath easy to clean?

Yes. Use a soft brush and a mild cleaner.

Will the price change on the day?

Your quote covers the damage in the pictures. If there is more, we will tell you before starting.

Do you need non-slip bath coating in Barling?

Smooth surfaces are easy to clean, yet with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.

These are the problems we’re asked about most:

  • Resurfaced baths that are now too smooth
  • Worn-out textured areas
  • Safety for older or less mobile people
  • Bath mats that harbour mould or get forgotten

Comparing quotes

  • What aftercare is recommended
  • When it can be used again
  • Whether the price covers travel
  • The length of the guarantee and what it covers

How to compare quotes

Should I try a DIY kit first?

You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.

If you do try a kit, read the instructions carefully and work on a clean, dry surface, and don’t use it until it has fully cured. If it fails, we can still put it right.

For landlords and businesses

We are used to working with agents and managing companies. Send the address, pictures and access details and we will arrange it.

Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.

How we price non-slip bath coating

There are no hourly rates or hidden extras. The price is based on:

  • Doing more than one item at once
  • Previous DIY repairs that have to come out
  • What the surface is made of
  • Whether it’s a chip, crack, burn or wear

Instead of hourly rates, we fix the price before we start. Damage, material and access decide it, and doing several items at once reduces it.

How to get a fixed quote

Photographing the damage takes a minute, and it saves a visit. Please include:

  • A wider photo showing the whole bath or shower tray
  • Something in shot to show the size
  • Daylight if possible, and no flash reflection
  • Your postcode, so we can check dates

Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the entire bath or shower tray, we can give you a fixed price without visiting.

What a repair can’t fix

We would rather lose a job than do one that will not last, so here’s what a repair can’t put right:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Not sure? Send photos and we will give you a straight answer.

Materials we work on in Barling

  • Resurfaced baths
  • Wet room floors (ask us)
  • Enamelled baths
  • Shower trays
  • Acrylic baths

Why repair rather than replace?

The alternatives are replacing the bath or tray with a textured one, or relying on a mat that needs lifting and cleaning. A coating treats your existing bath or tray. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.

Why Barling clients choose us

  • Honest advice, even when it means no job
  • Most jobs done in one visit
  • CHAS and Constructionline accredited
  • One price list for the entire UK

Read our full price list.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.