Gloucestershire · England
Non-slip bath & shower coating in Barton, Gloucestershire
Clear non-slip coatings for baths and shower trays for householders, landlords and businesses in Barton. Send photos for a free, fixed quote.
- A bath or tray that is slippery when wet
- Worn-out textured areas
- Resurfaced baths that are now too smooth
Non-slip bath coating in Barton without replacing anything
The coating is clear and textured, so it shows only as a slightly matt area where you stand. It suits homes with older or less mobile people, holiday lets and families. Common call-outs are for bath mats that harbour mould or get forgotten and safety for older or less mobile people, on wet room floors (ask us), acrylic baths and resurfaced baths.
All our work is covered by our one-year guarantee. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.
- Area
- Barton (GL54)
- Area hub
- Gloucestershire
- Guarantee
- 12 months on all our work
- Quotes
- Free, fixed price from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Questions from Barton
Is it worth repairing rather than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. We’ll be honest if it’s not worth it.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as homeowners in Barton.
Do you work in Barton?
Yes. We work across the UK and travel to Barton. Send us photos for a fixed quote, or call 0345 017 0787.
Is it safe with children and pets around?
Just keep them out of the work area. We’ll tell you when the room can be used again.
Will you leave a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Do you charge for travel?
No. Our quotes include travel, and we charge the same wherever you are.
Is a non-slip bath easy to clean?
Yes. A soft brush and mild cleaner is all it needs.
I rent my home. Can I book you?
Of course. Ask your landlord first, and we can send them the quote if that helps.
Repairing versus replacing in Barton
The alternatives are replacing the bath or tray with a textured one, or a bath mat that needs lifting and cleaning. A coating treats your existing bath or tray. There are no surprise extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Why us?
- No extra charge for your area
- Fixed prices from your pictures
- CHAS, Constructionline and SafeContractor accredited
- We’ll tell you if it’s not worth repairing
Read our full price list.
Landlords, agents and businesses in Barton
Builders use us to fix snagging damage before handover, so there is no need to replace a damaged item at the last minute. Several plots can be done in one visit.
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We will fit around changeovers where we can.
What we can’t put right
Before you book, it’s worth knowing the limits:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
If in doubt, send pictures and we will say what we think before you book.
Materials we repair
- Enamelled baths
- Shower trays
- Acrylic baths
- Resurfaced baths
- Wet room floors (ask us)
What non-slip bath coating costs
There are no hourly rates or hidden extras. The price depends on:
- What kind of damage it is
- Access to the area
- Doing more than one item at once
- Previous DIY repairs that have to come out
No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
Getting a price from pictures
You can take the pictures on your phone. Just ensure we can see:
- Natural light rather than flash
- One sharp close-up of the damage
- A coin or ruler next to the damage for scale
- Any earlier repairs or coatings
There’s no need for us to visit first. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Signs you need non-slip bath coating in Barton
Baths and trays are made smooth so they’re easy to clean, but with soap and water on them they become slippery. Textured areas on older baths wear smooth too.
It’s worth getting a quote if you see:
- Bath mats that harbour mould or get forgotten
- Safety for older or less mobile people
- A bath or tray that is slippery when wet
- Resurfaced baths that are now too smooth
Questions to ask before you book
- How to look after the finish
- What the guarantee covers, and for how long
- Whether a trained technician does the job
- How the room is protected while they work
Our work in Barton
Barton is about 9 miles east of Bishop's Cleeve, in Gloucestershire. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. Our technicians cover 470 places in Gloucestershire, from the larger towns to small villages. Our jobs stretch from Barton to Birmingham (38 miles away).
Jobs in GL54 are booked in the same way as anywhere else. Local streets include Well Lane, Church Road and Piccadilly, and we cover them all. Other places close to Barton include Guiting Power (1 mile south), Naunton (2 miles south-east), Hailes (4 miles north-west), Lower Slaughter (5 miles east) and Lower Swell (5 miles east). Within a short drive, we also cover Cheltenham (10 miles west), Tewkesbury (13 miles west), St Paul's (9 miles west), Cirencester (15 miles south), Lansdown (9 miles west) and Bishop's Cleeve (9 miles west).
Local landmarks in Barton
Locally, our jobs take us to homes close to St Michael's and All Angels Church, among other places. A little further out are Sudeley Castle (4.2 miles west) and Moore Cottage Hospital (5.3 miles south-east). Green spaces nearby include Shenberrow Hill.
How it works
We agree an arrival time beforehand, so you’re not left guessing. Once we’re there, the work takes a morning or an afternoon in most cases. We leave the room clean and ready to use once it has cured.
- First the standing area is cleaned and degreased.
- Next we mask off the area.
- We apply the clear textured coating.
- We remove the masking for a neat edge.
- The coating is left to cure before use, typically overnight.
How to prepare
- Move bottles, mats and clutter away from the area
- Mention any parking restrictions or tricky access
- Keep children and pets away from the room on the day
How to get a price
The quickest way to a price is to send a couple of photos using our quote form or ring us. We’ll say immediately if a repair is the right fix.
Read more
Towns and villages near Barton
Other services in Barton
Can I fix it myself?
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
About our accreditations · Every repair comes with a one-year guarantee.
