North Yorkshire · England
Non-slip bath & shower coating in Barton, North Yorkshire
Our repair technicians come to Barton for clear non-slip coatings for baths and shower trays. Nothing is taken out, and the work is guaranteed.
- A bath or tray that is slippery when wet
- Safety for older or less mobile people
- Bath mats that harbour mould or get forgotten
How we handle non-slip bath coating in Barton
It’s a clear, textured coating, so the bath looks much the same. It suits older people, families and holiday lets. We work on enamelled baths, acrylic baths and wet room floors (ask us), and common reasons people contact us are bath mats that harbour mould or get forgotten and a bath or tray that is slippery when wet.
A one-year guarantee comes with the work, just as it does everywhere we cover. Clean with a soft brush and a mild cleaner. Do not use abrasive pads on the textured area.
- Where
- Barton (DL10)
- Region
- North Yorkshire
- Warranty
- One year on every repair
- Quotes
- Free and fixed, from your photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Repair or replace: which is better?
The alternatives are a new textured bath or tray, or a bath mat that needs lifting and cleaning. A non-slip coating treats your existing bath or tray. What it costs depends on how much damage there is and what kind, the material and how many items we do on one visit. You get a fixed price from your pictures, so you know the cost before booking.
Why us?
- We will tell you if it’s not worth repairing
- Free fixed quotes from pictures
- No need to remove anything
- Same prices wherever you are
Read our prices page.
What affects the price in Barton
You’ll know the full cost before booking. We look at:
- Whether it’s a chip, crack, burn or wear
- The material
- Where the damage is and how we get to it
- Whether old repairs or coatings need taking off
Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send photos and we will give you the exact figure.
Send pictures for a quote
Before you send photos, these tips help us give you a firm price:
- Details of any past repairs
- A coin beside the damage so we can judge size
- A wider photo showing the entire bath or shower tray
- Daylight if possible, and no flash reflection
The quickest way to a price is to send a couple of photos using our quote form or ring us. We will tell you honestly whether it can be repaired.
For landlords and businesses
Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so we keep visits short and tidy. We’ll fit around changeovers where we can.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We’re CHAS, Constructionline and SafeContractor accredited.
Do you need non-slip bath coating in Barton?
Baths and trays are made smooth so they’re easy to clean, but with soap and water on them they become slippery. Textured areas on older baths wear smooth too.
Send us a photo if you notice any of these:
- Resurfaced baths that are now too smooth
- Worn-out textured areas
- A bath or tray that is slippery when wet
- Safety for older or less mobile people
What your quote should include
- How soon you can use it again
- How changes to the job are handled
- Who turns up on the day
- How the colour is matched
Barton and nearby
Barton is about 6 miles south-west of Darlington, in North Yorkshire. Book a date that suits you, and you’ll know when to expect us, so you are not left waiting in all day. We cover all 626 towns and villages in North Yorkshire. Our nearest city page is Newcastle upon Tyne, about 36 miles away.
Every address in DL10 is covered, from the main roads to the quietest streets. From St Mary's Close, Silver Street and Church Lane or anywhere nearby, a technician can come to you. Neighbouring places we cover include Middleton Tyas (2 miles south), Melsonby (2 miles west), Aldbrough St John (2 miles north-west), Manfield (3 miles north) and Stapleton (3 miles north-east). Larger places within reach include Catterick Garrison (7 miles south), Northallerton (13 miles south-east), Richmond (6 miles south-west), Colburn (7 miles south), Bedale (13 miles south) and Romanby (13 miles south-east).
Around Barton
Our clients here include homes close to Church of St Cuthbert and St Mary and Barton Church of England Primary School, among other places. Other landmarks nearby include Darlington Memorial Hospital (5 miles north-east) and Rock Castle (3.3 miles south-west).
How it works
We agree an arrival time beforehand, so you know when to expect us. On site, it takes a few hours. We leave the room clean and you will know when it can be used.
- We clean and degrease the standing area.
- Next we mask off the area.
- We put on the clear non-slip coating.
- We remove the masking for a neat edge.
- Once it has cured, normally overnight, it’s ready.
How to prepare
- Let us know about parking or access
- Open a window if you can
- Keep a parking space free if you can
Getting a price
You don’t need a survey visit. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed price.
Related advice
DIY kit or professional repair?
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is generally cheaper.
Honest limits
A repair isn’t always the answer, and we’d rather say so up front. We cannot fix:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
If in doubt, send photos and we will say what we think.
What we work on
- Shower trays
- Wet room floors (ask us)
- Acrylic baths
- Enamelled baths
- Resurfaced baths
Barton: your questions answered
Do you come to Barton?
Yes. We cover the entire UK and come to Barton and the rest of North Yorkshire. Send us pictures for a fixed quote, or call 0345 017 0787.
How do I clean it?
Yes. Use a soft brush and a mild cleaner.
Is it worth repairing rather than replacing?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. We’ll be honest if it’s not worth it.
Are there extra charges for Barton?
We don’t add a call-out fee. The fixed price covers the visit and the work.
Is it OK to have pets in the house?
Keep pets and children away from the work area on the day, so the repair is not disturbed while it cures.
What information do you need?
Some pictures, your postcode and how to reach you. On the day, we only need access to the room.
Can you do more than one item on the same visit?
Yes, and it’s frequently cheaper. Just add the extra items to your photos and we will quote them together.
Will a non-slip coating change how my bath looks?
Very little: the treated area looks slightly matt.
Nearby places to Barton
More services for Barton
About our accreditations · Every repair comes with a one-year guarantee.
