Gloucestershire · England
Non-slip bath & shower coating in Barton-on-the-Heath, Gloucestershire
Non-slip bath coating across Barton-on-the-Heath and nearby, normally in one visit.
- A bath or tray that is slippery when wet
- Worn-out textured areas
- Bath mats that harbour mould or get forgotten

What happens on the day
The work is clean and fairly quiet, so you can carry on at home. Protection goes down first, then the job itself takes a morning or an afternoon. At the end we talk you through the curing time and the aftercare.
- We clean and degrease the standing area.
- The area to be treated is masked out.
- We apply the clear textured coating.
- We lift the masking for a clean edge.
- Once it has cured, normally overnight, it’s ready.
Getting ready for the visit
- Clear toiletries, mats and anything else from around the area
- Tell us if there are stairs or a lift
- Have somewhere for us to park nearby if possible
Get a quote
If you are in Barton-on-the-Heath and want a price, the easiest route is pictures: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Related advice
Non-slip bath coating in Barton-on-the-Heath without replacing anything
It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. It suits homes with older or less mobile people, holiday lets and families. Our repair technicians work on wet room floors (ask us), resurfaced baths and shower trays, and common reasons people get in touch are bath mats that harbour mould or get forgotten and a bath or tray that is slippery when wet.
Your repair is guaranteed for a year, as with every job we do. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.

- Area
- Barton-on-the-Heath (GL56)
- Area hub
- Gloucestershire
- Cover
- One year on every repair
- Quote
- Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Towns and villages near Barton-on-the-Heath
Also in Barton-on-the-Heath
Should you replace it?
The alternatives are a new textured bath or tray, or relying on a mat that needs lifting and cleaning. A non-slip coating adds grip to the bath you have. Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access.
Why Barton-on-the-Heath clients choose us
- A fixed quote before booking
- One price list for the entire UK
- CHAS, Constructionline and SafeContractor accredited
- We come to you, anywhere in the UK
See our pricing.
When we’d advise against a repair
It helps to know what we cannot do:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Not sure? Send pictures and we will give you a straight answer.
Surfaces we repair
- Enamelled baths
- Wet room floors (ask us)
- Shower trays
- Resurfaced baths
- Acrylic baths
Barton-on-the-Heath and nearby
Barton-on-the-Heath is about 13 miles west of Banbury, in Gloucestershire. We agree a date that works for you, and we will give you an arrival time in advance, so you’re not left waiting in all day. Barton-on-the-Heath is one of 470 places in Gloucestershire we cover. You can also see our page for Birmingham, about 35 miles away.
All of GL56 is covered, from the main roads to the quietest streets. We also travel to Little Compton (2 miles south), Chastleton (2 miles south), Moreton-in-Marsh (3 miles west), Evenlode (3 miles south-west) and Adlestrop (4 miles south). Within a short drive, we also cover Winchcombe (15 miles west), Bourton-on-the-Water (9 miles south-west), Chipping Campden (8 miles north-west), Stow-on-the-Wold (6 miles south-west), Upper Rissington (9 miles south) and Northleach (14 miles south-west).
Landmarks near Barton-on-the-Heath
In Barton-on-the-Heath, that means homes near Church of St Lawrence and the streets around them. Barton-on-the-Heath’s nearest station is Moreton-In-Marsh station, about 3.1 miles west of the centre. Nearby you’ll also find Wellington Aviation Museum (3.4 miles west) and Ellen Badger Hospital (5.1 miles north).
Signs you need non-slip bath coating in Barton-on-the-Heath
Smooth surfaces are easy to clean, yet with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.
It’s worth getting a quote if you see:
- Worn-out textured areas
- Bath mats that harbour mould or get forgotten
- A bath or tray that is slippery when wet
- Resurfaced baths that are now too smooth
Comparing quotes
- How to look after the finish
- How your room will be protected
- Whether cleaning and preparation are in the price
- Who will actually do the work
Barton-on-the-Heath questions
Can I add another job to the visit?
Yes, and it’s frequently cheaper. Send pictures of everything together and we’ll quote them together.
What does non-slip bath coating cost?
Every job gets a fixed price from your pictures. Send a close-up of the damage and a wider photo and your postcode.
Is my repair covered?
All our work carries a one-year guarantee. Ask us what it covers when you get your quote.
Do you work in Barton-on-the-Heath?
Yes. We work across the UK and come to Barton-on-the-Heath. Send photos and we will quote, or call 0345 017 0787.
Do you do work for letting agents?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses in Barton-on-the-Heath.
How do I clean it?
Yes. Use a soft brush and a mild cleaner.
Does someone need to be in?
We need someone to let us in. You do not need to watch us work.
What if the damage is worse than the pictures show?
We’ll show you and explain before doing anything extra. Nothing extra is done without your say-so.
Prices and what affects them
We charge the same across the UK, including Barton-on-the-Heath. The price reflects:
- Any earlier repairs that need removing first
- What kind of damage it is
- The size and number of damaged areas
- The material
Our prices are the same across the UK, so there is no premium for Barton-on-the-Heath. What changes the price is the job itself: the material, the amount of damage and how many items.
Getting a price from photos
You can normally get a fixed price without us visiting. To make it quick:
- A coin or ruler next to the damage for scale
- Daylight if possible, and no flash reflection
- Where you are, by postcode
- A close-up of the damage, in focus
There is no need for us to visit first. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed price.
Can I fix it myself?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
Landlord and trade work in Barton-on-the-Heath
We are used to working with agents and managing companies. Just send pictures, the address and how to get access and we’ll arrange it.
Letting agents often send us photos straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
About our accreditations · Every repair comes with a one-year guarantee.

