Gloucestershire · England

Non-slip bath & shower coating in Battlescombe, Gloucestershire

Non-slip bath coating across Battlescombe and nearby, typically in one visit and guaranteed for a year.

  • Safety for older or less mobile people
  • Resurfaced baths that are now too smooth
  • A bath or tray that is slippery when wet
Surface Doctor technician refinishing the outside of a roll-top bath

Book non-slip bath coating in Battlescombe

Non-slip bath coating in Battlescombe, done in place

It’s a clear, textured coating, so the bath looks much the same. It suits older people, families and holiday lets. Whether it’s a bath or tray that is slippery when wet and safety for older or less mobile people, we can help.

Whatever the size of the job, you get the same one-year guarantee in Battlescombe and across Gloucestershire. A soft brush and mild cleaner keep it clean. Avoid scourers on the coating.

Before and after: an old shower tray refinished by Surface Doctor
Where
Battlescombe (GL6)
Area hub
Gloucestershire
Warranty
A year, on every repair
Quote
Free and fixed, from your pictures
Phone
0345 017 0787
Updated
23 October 2026

Common questions in Battlescombe

Can you quote from photos?

In nearly every case. If pictures do not show enough, we’ll ask for another angle.

I’m a tenant. Can you help?

Yes, but check with your landlord or agent first. Landlords are often glad to have it sorted.

Will a non-slip coating change how my bath looks?

Only slightly: it shows as a matt area where you stand.

Do you work for landlords and businesses?

Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.

Do you charge for travel?

There’s no separate call-out charge. Your fixed quote includes everything.

What information do you need?

Use the quote form or ring 0345 017 0787, and we will take it from there.

How do I clean it?

Yes. Use a soft brush and a mild cleaner.

When can you do it?

That depends on our diary for your area. Send pictures with your postcode and we’ll reply with the earliest dates.

DIY kit or professional repair?

It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is usually cheaper.

A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.

What affects the price in Battlescombe

We give every job a fixed price from photos. This is what makes a difference:

  • Whether it’s a chip, crack, burn or wear
  • Access to the area
  • Whether we combine several jobs
  • How many areas need work

A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.

Getting a price from photos

We price nearly every job from photos. This is what to send:

  • A photo taken from further back
  • Any earlier repairs or coatings
  • A close-up of the damage, in focus
  • Something in shot to show the size

Pricing is simple: snap the damage close up and then the whole item, send them over with your postcode, and you’ll get a fixed quote back. There’s no charge for the quote and you are under no obligation.

Battlescombe and nearby

Battlescombe is about 5 miles east of Stroud, in Gloucestershire. We agree a date that works for you, and you will know when to expect us, so you are not left waiting in all day. We cover all 470 towns and villages in Gloucestershire. You can also see our page for Birmingham, about 51 miles away.

Postcode districts we cover here: GL6. Neighbouring places we cover include Waterlane (1 mile south), Bisley (1 mile west), Bournes Green (1 mile south-west), Stancombe (1 mile north-west) and Oakridge Lynch (2 miles south). Larger places within reach include Cheltenham (10 miles north), Gloucester (8 miles north-west), Stroud (5 miles west), St Paul's (10 miles north), Cirencester (7 miles south-east) and Lansdown (10 miles north).

Landmarks near Battlescombe

Typical jobs here are in homes near Bisley Blue Coat Church of England Primary School, Sapperton Valley and Thomas Keble School and the streets around them. Also close by are Stirrup Cup pub (0.9 miles west) and Church of All Saints (0.9 miles west). For rail, the closest station is Stroud station, roughly 4.3 miles west. Nearby you’ll also find Miserden Castle (2.5 miles north-east) and Arcade Archive (3 miles south-west). The countryside around Battlescombe includes Cotswolds and Siccaridge Wood.

Map of Battlescombe © OpenStreetMap contributors

Common problems we fix in Battlescombe

Smooth surfaces are easy to clean, but with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.

Customers typically contact us about:

  • Bath mats that harbour mould or get forgotten
  • Safety for older or less mobile people
  • Worn-out textured areas
  • A bath or tray that is slippery when wet

Before you book anyone

  • Aftercare advice
  • How long it needs to cure
  • How changes to the job are handled
  • How your room will be protected

How to compare quotes

For landlords and businesses

Letting agents often send us pictures straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.

Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We’re CHAS, Constructionline and SafeContractor accredited.

Honest limits

We will not take on work that will not last, so here’s what a repair can’t put right:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Send us photos and we will tell you honestly.

Materials we work on in Battlescombe

  • Enamelled baths
  • Acrylic baths
  • Shower trays
  • Wet room floors (ask us)
  • Resurfaced baths

Why repair rather than replace?

Instead, you could go for a new textured bath or tray, or relying on a mat, which traps water and needs cleaning. A non-slip coating adds grip to the bath you have. Instead of hourly rates, we fix the price before we start. Damage, material and access decide it, and combining items on one visit brings it down.

What you get with us

  • Dust sheets down, tidy finish
  • Free fixed quotes from pictures
  • One-year guarantee on every repair
  • One price list for the entire UK

Take a look at our pricing.

How it works

A typical visit goes like this: we arrive on time, protect everything around the work area, carry out the work and clear up. Plan for a few hours from start to finish. Before we go, we’ll explain when it can be used and how to look after it.

  1. First the standing area is cleaned and degreased.
  2. We mask out the area to be treated.
  3. We put on the clear non-slip coating.
  4. The masking comes off to leave a neat edge.
  5. Once it has cured, normally overnight, it’s ready.

Getting ready for the visit

  • Clear toiletries, mats and anything else from around the area
  • Have a window or extractor fan available
  • Avoid using the area for a few hours before we arrive

Get a quote

For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we will send back a fixed quote and some dates.

Get a fixed quote

Read more

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.