Dorset · England
Non-slip bath & shower coating in Beacon Hill, Dorset
Non-slip bath coating in Beacon Hill without the cost of replacing. Get a fixed price from your photos, then we come to you.
- A bath or tray that is slippery when wet
- Safety for older or less mobile people
- Resurfaced baths that are now too smooth
Do you need non-slip bath coating in Beacon Hill?
Baths and trays are made smooth so they’re easy to clean, yet with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.
The most common problems we’re called about are:
- Safety for older or less mobile people
- Bath mats that harbour mould or get forgotten
- Resurfaced baths that are now too smooth
- Worn-out textured areas
What your quote should include
- How long it needs to cure
- If travel is included in the price
- Whether they match the colour on site
- What happens if the damage is worse than the pictures show
How we handle non-slip bath coating in Beacon Hill
It’s popular with older people, families and holiday lets. The coating is clear and textured, so it shows only as a slightly matt area where you stand. Our technicians work on wet room floors (ask us), resurfaced baths and enamelled baths, and the jobs we see most are bath mats that harbour mould or get forgotten and safety for older or less mobile people.
Your repair is guaranteed for a year, as with every job we do. A soft brush and mild cleaner keep it clean. Do not use abrasive pads on the textured area.
- Location
- Beacon Hill (BH16, BH21)
- Area hub
- Dorset
- Cover
- A year, on every repair
- Quotes
- Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
How we price non-slip bath coating
We price every job individually, from your photos. What matters most is:
- What kind of damage it is
- How many items we do on one visit
- How much damage there is
- Any earlier repairs that need removing first
What it costs depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. We give a fixed price from your pictures, so you know the cost before booking.
Quotes from your pictures
We price nearly every job from pictures. This is what to send:
- A wider photo showing the entire bath or shower tray
- A clear, close picture of the problem area
- A coin or ruler next to the damage for scale
- Good light, ideally daylight, without flash glare
Email us pictures of the damage and a wider shot of the whole item, and tell us you’re in Beacon Hill, and we’ll reply with a fixed quote.
Where we work around Beacon Hill
Beacon Hill is about 4 miles north-west of Poole, in Dorset. We agree a date that works for you, and you’ll know when to expect us, so you are not left waiting in all day. Beacon Hill is one of 462 places in Dorset we cover.
Here we cover the BH16 and BH21 postcode area. Whether you live on Maylyn Road, Old Wareham Road and Blandford Road North or a nearby road, we can come to you. We also cover the places around Beacon Hill: Post Green (1 mile south-west), Upton (1 mile south-east), Barrow Hill (1 mile west), Lytchett Minster (1 mile south-west) and Corfe Mullen (2 miles north-east). We also work in nearby towns such as Christchurch (13 miles east), Wimborne Minster (5 miles north-east), Blandford Forum (9 miles north-west), Verwood (11 miles north-east), Ferndown (7 miles north-east) and Swanage (11 miles south).
Near you in Beacon Hill
In Beacon Hill, that means homes near Upton Infant School, Saint Aldhelm's Church and Lytchett Minster School and the streets around them. The closest station to Beacon Hill is Hamworthy station, about 2.2 miles south-east of the centre. Further afield, we also cover the area around Dolphin Shopping Centre (3.6 miles south-east) and Poole Hospital (3.7 miles south-east). For a walk, there is Ham Common (LNR) and Stoney Down.
For landlords and businesses
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
We are used to working with agents and managing companies. Send the address, photos and access details and we’ll handle the rest.
Why repair rather than replace?
Instead, you could go for a new textured bath or tray, or a bath mat, which traps water and needs cleaning. A coating treats your existing bath or tray. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send pictures and we’ll give you the exact figure.
Why book with us
- Free fixed quotes from pictures
- We leave the room as we found it
- CHAS and Constructionline accredited
- Straight answers about what a repair can do
See our full price list.
Towns and villages near Beacon Hill
More services for Beacon Hill
Common questions in Beacon Hill
What happens once I’ve sent pictures?
We check the damage, the material and your postcode, then reply with a quote.
What do you need from me?
Use the quote form or ring 0345 017 0787, and we will take it from there.
Is it OK to have pets in the house?
Just keep them out of the work area. We will let you know when it’s safe to use again.
Is it messy?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
What areas do you cover?
We work UK-wide. Our prices are the same everywhere.
How do I clean it?
Yes. A soft brush and mild cleaner is all it needs.
How quickly can you book me in?
Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.
It’s been repaired before. Can you still fix it?
Yes, regularly. Removing the old work can add time, and that is in the quote.
Honest limits
Before booking, it’s worth knowing the limits too:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Send us pictures and we will tell you honestly before booking.
Surfaces we repair
- Wet room floors (ask us)
- Acrylic baths
- Shower trays
- Enamelled baths
- Resurfaced baths
Can I fix it myself?
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
If you are set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and give it the full curing time. If it does not work out, we can still repair it properly.
How it works
We agree an arrival time beforehand, so you know when to expect us. Once we’re there, the work takes a morning or an afternoon for most jobs. We leave the room clean and you’ll know when it can be used.
- First the standing area is cleaned and degreased.
- Next we mask off the area.
- The clear textured coating is applied.
- The masking comes off to leave a neat edge.
- Once it has cured, normally overnight, it’s ready.
Preparing for the visit
- Plan for the room to be out of bounds to pets and children
- Make sure the room can be ventilated
- Keep a parking space free if you can
Ask for a price
You don’t need a survey visit. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
