Buckinghamshire · England
Non-slip bath & shower coating in Beacon's Bottom, Buckinghamshire
Non-slip bath coating in Beacon's Bottom without the cost of replacing. Send us photos for a fixed quote, then book a visit.
- A bath or tray that is slippery when wet
- Worn-out textured areas
- Safety for older or less mobile people
How we handle non-slip bath coating in Beacon's Bottom
It’s a clear, textured coating, so the bath looks much the same. It suits homes with older or less mobile people, holiday lets and families. Our repair technicians work on enamelled baths, resurfaced baths and wet room floors (ask us), and the jobs we see most are resurfaced baths that are now too smooth and bath mats that harbour mould or get forgotten.
We stand behind the work with a one-year guarantee, so you’re covered after the visit. Clean with a soft brush and a mild cleaner. Do not use abrasive pads on the textured area.
- Location
- Beacon's Bottom (HP14)
- County
- Buckinghamshire
- Guarantee
- One year on every repair
- Quotes
- Fixed and free, based on photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Our work in Beacon's Bottom
Beacon's Bottom is about 5 miles west of High Wycombe, in Buckinghamshire. Across the HP14 area, we carry out the work at your property. Our technicians cover all 263 towns and villages across Buckinghamshire, from the larger towns to small villages. Our nearest city page is London, about 35 miles away.
Our visits in HP14 work the same way as everywhere else we cover. We regularly work on streets such as St Francis Road, Wycombe Road and Water End Road and the roads around them. We also travel to Horsleys Green (1 mile south), Waterend (1 mile north), Studley Green (1 mile south-east), The City (1 mile north-east) and Green End (1 mile east). Further out, we also cover Aylesbury (12 miles north), High Wycombe (5 miles east), Chesham (12 miles east), Marlow (7 miles south-east), Amersham (11 miles east) and Beaconsfield (10 miles east).
Landmarks near Beacon's Bottom
Around Beacon's Bottom, we work in homes near The Mary Towerton School At Studley Green and Studley Arms. The nearest railway station is Saunderton station, about 2.4 miles north-east of the centre. A little further out are West Wycombe Rural (1.7 miles east) and Wycombe Hospital (5.1 miles east). Open spaces near Beacon's Bottom include Bald Hill and Yoesden.
When to call us in Beacon's Bottom
Smooth surfaces are easy to clean, yet wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.
If you can see any of these, send us a picture:
- Resurfaced baths that are now too smooth
- Safety for older or less mobile people
- Worn-out textured areas
- A bath or tray that is slippery when wet
What to look for in a quote
- Whether the price is fixed and includes VAT
- Whether a trained technician does the job
- How long it needs to cure
- Whether there are any call-out or travel charges
What we do, step by step
We turn up when we said we would and looks over the damage before anything else. The floor and nearby surfaces are covered before we open a single tin. Most visits take a morning or an afternoon, and the room is left clean and tidy.
- We start by degreasing the area where you stand.
- We mask out the area to be treated.
- The clear textured coating is applied.
- The masking comes off to leave a neat edge.
- The coating is left to cure before use, usually overnight.
Before we arrive
- Tell us about parking, stairs or access
- Tell us if there are stairs or a lift
- Avoid using the area for a few hours before we arrive
Ask for a price
Most customers in Beacon's Bottom get their price from photos. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.
Read more
Landlords, agents and businesses in Beacon's Bottom
For anyone letting property in or around Beacon's Bottom, we will quote for several properties at once. Send pictures for each one and we’ll price them together.
We work for landlords, letting agents and housing providers in Beacon's Bottom as well as householders. A repair between tenants keeps the property empty for less time, and it generally costs far less than a refit.
Places near Beacon's Bottom
More services for Beacon's Bottom
Questions from Beacon's Bottom
Does someone need to be in?
We need someone to let us in. You do not need to watch us work.
Is it safe with children and pets around?
Yes, as long as they stay out of the room we’re working in. We will let you know when it’s safe to use again.
What do you need from me?
Some photos, your postcode and how to reach you. On the day, access to the room.
How do I get a price for non-slip bath coating in Beacon's Bottom?
Because every job differs, we price from photos. You will get a fixed figure before booking.
What happens if you find more damage?
We stop, show you and agree any change before carrying on. You will not be charged for anything you haven’t agreed.
Is a repair better than a new one?
In most cases, yes. A repair skips the removal, fitting and redecorating. If it is not worth repairing, we will tell you.
Can you repair something that’s been repaired before?
Most of the time. Let us know what was used before and we will plan for it.
Do you do work for letting agents?
Yes. We work for landlords, agents, builders and businesses as well as homeowners in Beacon's Bottom.
Why repair rather than replace?
Instead, you could go for replacing the bath or tray with a textured one, or relying on a mat, which traps water and needs cleaning. A non-slip coating treats your existing bath or tray. Compared with replacing, a repair is typically a fraction of the price, because there’s no removal, plumbing or making good. The quote lists exactly what you’re paying for.
Why choose Surface Doctor in Beacon's Bottom
- We leave the room as we found it
- A fixed quote before you book
- We will tell you if it’s not worth repairing
- One visit for most repairs
See our full price list.
Should I try a DIY kit first?
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
When we would advise against a repair
We’ll always be straight with you, so here’s what a repair can’t fix:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Not sure? Send photos and we’ll give you a straight answer before you book.
What we work on
- Acrylic baths
- Wet room floors (ask us)
- Enamelled baths
- Resurfaced baths
- Shower trays
How we price non-slip bath coating
Every quote is fixed and free. What we take into account:
- How much damage there is
- What the surface is made of
- Whether old repairs or coatings need taking off
- Unusual colours or finishes
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
How to get a fixed quote
Phone photos are fine, there is no need for anything special. Just make sure we can see:
- A coin or ruler next to the damage for scale
- Natural light rather than flash
- The material, if you know it
- Details of any past repairs
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath or shower tray, we can give you a fixed price the same day in most cases.
About our accreditations · Every repair comes with a one-year guarantee.
