Greater London · England
Non-Slip Bath Coating for Becontree homes
Local non-slip bath coating for Becontree: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Worn-out textured areas
- Resurfaced baths that are now too smooth
- A bath or tray that is slippery when wet
Why repair rather than replace?
Instead, you could go for replacing the bath or tray with a textured one, or relying on a mat, which traps water and needs cleaning. A non-slip coating treats your existing bath or tray. The price depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. You get a fixed price from your photos, so there are no surprises on the day.
Why us?
- CHAS, Constructionline and SafeContractor accredited
- Free fixed quotes from pictures
- One visit for most repairs
- Everything repaired in place
Take a look at our full price list.
Non-slip bath coating at your home in Becontree
The coating is clear and textured, so the bath looks much the same. It suits homes with older or less mobile people, holiday lets and families. Whether it’s worn-out textured areas and a bath or tray that is slippery when wet, we can generally put it right, on acrylic baths, resurfaced baths and enamelled baths alike.
A one-year guarantee comes as standard. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.
- Location
- Becontree (RM9, RM10, RM8)
- County
- Greater London
- Warranty
- A year, on every repair
- Price
- Free, fixed quote from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Common questions in Becontree
Can you quote from photos?
In nearly every case. If pictures do not show enough, we will ask for another angle.
Is it messy?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
What happens once I’ve sent pictures?
You get a fixed quote and available dates. If we need another angle, we’ll ask.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as householders across Greater London.
Is it OK to have pets in the house?
Please keep children and pets out of the room during the visit and until it has cured. Everywhere else in the home is fine.
Can you do more than one item on the same visit?
Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.
Will the price change on the day?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
What information do you need?
Use the quote form or ring 0345 017 0787.
When we would advise against a repair
We will not take on work that won’t last, so here’s what a repair can’t put right:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Not sure? Send pictures and we will give you a straight answer.
What we work on
- Wet room floors (ask us)
- Shower trays
- Enamelled baths
- Resurfaced baths
- Acrylic baths
The process
We agree an arrival time beforehand. On site, it takes a few hours. The room is left tidy and you will know when it can be used.
- First the standing area is cleaned and degreased.
- We mask out the area to be treated.
- We put on the clear non-slip coating.
- We lift the masking for a clean edge.
- Once it has cured, normally overnight, it’s ready.
Preparing for the visit
- Avoid using the area for a few hours before we arrive
- Mention any parking restrictions or tricky access
- Point us to the nearest place to park
How to get a price
Most clients in Becontree get their price from photos. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
Read more
Do you need non-slip bath coating in Becontree?
Smooth surfaces are easy to clean, yet wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.
If you can see any of these, send us a picture:
- Worn-out textured areas
- Resurfaced baths that are now too smooth
- A bath or tray that is slippery when wet
- Safety for older or less mobile people
Comparing quotes
- Whether the price covers travel
- Who turns up on the day
- How your room will be protected
- How changes to the job are handled
DIY repairs versus a professional job
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and do not use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
Nearby places to Becontree
What else we do in Becontree
Work for landlords and builders
For anyone letting property in or around Becontree, we’ll quote for several properties at once. Send photos for each one and we will come back with a combined price.
We work for landlords, letting agents and housing providers in Becontree as well as householders. A repair between tenants keeps the property empty for less time, and it typically costs far less than a refit.
How we price non-slip bath coating
We give every job a fixed price from pictures. These are the things that affect it:
- What the surface is made of
- The size and number of damaged areas
- Whether old repairs or coatings need taking off
- What kind of damage it is
Our prices are the same across the UK, so there’s no premium for Becontree. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Send pictures for a quote
The better the pictures, the more accurate the price. Here’s what helps:
- Whether it’s been repaired or coated before
- What it’s made of, if you know
- A close-up of the damage, in focus
- One picture of the entire bath or shower tray
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can price the job the same day in most cases.
Where we work around Becontree
Becontree is about 2 miles north-east of Barking, in Greater London. Anywhere in RM9, we carry out the work at your property. Becontree is one of 764 towns and villages in Greater London where we work. We work right across the region, from Becontree to London (about 11 miles away).
Here we cover the RM9, RM10 and RM8 postcode area. You’ll find streets such as Wood Lane, Eliot Road and Maxey Road, and we cover them all. Being close to the A1240, Becontree is simple for us to get to. Other places close to Becontree include Dagenham (1 mile south-east), Becontree Heath (1 mile north), Castle Green (1 mile south-west), Dagenham Green (1 mile south) and Goodmayes (2 miles north-west). Within a short drive, we also cover London (11 miles west), City of Westminster (13 miles west), Marylebone (13 miles west), Kensington (15 miles west), St Pancras (11 miles west) and Shoreditch (10 miles west).
What’s near Becontree
We visit homes around Robert Clack School, Parsloes Park and St Joseph's Catholic Primary School, among other places. Nearby too are St George's (under half a mile south-east) and Eastbrook pub (0.9 miles east). Becontree’s nearest station is Chadwell Heath station, roughly 1.5 miles north-west of the centre. Nearby you will also find Rush Green Hospital (1.6 miles north-east) and Dagenham (1 mile north-east). For a walk, there is Dagenham Village Churchyard.
About our accreditations · Every repair comes with a one-year guarantee.
