Kent · England
Non-Slip Bath Coating in Bekesbourne Hill
Non-slip bath coating in and around Bekesbourne Hill: photo quotes, tidy work and a year’s guarantee.
- Safety for older or less mobile people
- Bath mats that harbour mould or get forgotten
- Resurfaced baths that are now too smooth
Non-slip bath coating at your home in Bekesbourne Hill
It’s popular with homes with older or less mobile people, holiday lets and families. It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. We work on wet room floors (ask us), acrylic baths and resurfaced baths, and people most often call us about a bath or tray that is slippery when wet and worn-out textured areas.
Big or small, you get the same one-year guarantee. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.
- Where
- Bekesbourne Hill (CT4)
- Region
- Kent
- Cover
- One year on every repair
- Quotes
- Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
How the visit works
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job usually takes a few hours. We tidy up before we leave and let you know when you can use it again.
- We clean and degrease the standing area.
- Next we mask off the area.
- The clear textured coating is applied.
- We remove the masking for a neat edge.
- We leave it to cure, usually overnight.
Getting ready for the visit
- Point us to the nearest place to park
- Clear toiletries, mats and anything else from around the area
- Tell us about any previous repairs or coatings
How to get a price
Getting a price is easy: take a close-up of the damage and a picture from further back, send them over with your postcode, and we’ll reply with a fixed quote. There’s no charge for the quote and no obligation.
Read more
Why repair rather than replace?
The alternatives are replacing the bath or tray with a textured one, or relying on a mat, which traps water and needs cleaning. A coating treats your existing bath or tray. Set against the cost of replacement, repairing typically costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.
Why Bekesbourne Hill customers choose us
- Every repair guaranteed for a year
- Dust sheets down, tidy finish
- One price list for the entire UK
- Typically one visit, start to finish
Take a look at our pricing.
Landlord and trade work in Bekesbourne Hill
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
We regularly work with letting and managing agents. Send the address, photos and access details and we will handle the rest.
What we can’t put right
A few problems are outside what a surface repair can do:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
If in doubt, send photos and we’ll say what we think before booking.
What we work on
- Shower trays
- Wet room floors (ask us)
- Resurfaced baths
- Acrylic baths
- Enamelled baths
About Bekesbourne Hill
Bekesbourne Hill is about 3 miles south-east of Canterbury, in Kent. Our repair technicians come to homes and businesses in Bekesbourne Hill and the surrounding area, so you do not need to take anything anywhere. We work in all 922 towns and villages across Kent. Our nearest city page is London, about 56 miles away.
Here we cover the CT4 postcode area. Jobs here include addresses on Bekesbourne Hill and Oakleigh Lane and the roads around them. We also cover the places around Bekesbourne Hill: Patrixbourne (1 mile south), Bekesbourne (1 mile south-east), Bridge (1 mile south-west), Littlebourne (2 miles north-east) and Bishopsbourne (2 miles south). We also work in nearby towns such as Ashford (14 miles south-west), Canterbury (3 miles north-west), Margate (13 miles north-east), Dover (11 miles south-east), Folkestone (12 miles south) and Ramsgate (13 miles north-east).
What’s near Bekesbourne Hill
We visit homes around Church of St Peter, St. Anselm's Catholic School and Chequer's Wood and Old Park, among other places. Bekesbourne Hill has its own railway station: Bekesbourne station. Other landmarks nearby include Canterbury Roman Museum (2.6 miles north-west) and St Martins Hospital (1.6 miles north-west). For a walk, there’s Blean Woods RSPB Reserve.
Signs you need non-slip bath coating in Bekesbourne Hill
Smooth surfaces are easy to clean, but with soap and water on them they become slippery. Textured areas on older baths wear smooth too.
Common reasons people in Bekesbourne Hill contact us are:
- A bath or tray that is slippery when wet
- Resurfaced baths that are now too smooth
- Worn-out textured areas
- Safety for older or less mobile people
What your quote should include
- Whether cleaning and preparation are in the price
- Is the price fixed, and does it include VAT?
- Whether the colour is mixed to match
- What the guarantee covers, and for how long
DIY repairs versus a professional job
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is generally the cheaper route.
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and do not use it until it has fully cured. If it fails, we can still put it right.
Bekesbourne Hill: your questions answered
Do you do work for letting agents?
Yes, frequently. We can quote for several properties together and work between tenancies.
Do you cover Bekesbourne Hill?
We do. We send a technician to Bekesbourne Hill for every job, and the price is the same as everywhere else.
What does non-slip bath coating cost?
Because every job differs, we price from photos. You know the full cost before anything is booked.
Is there a guarantee?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
It’s been repaired before. Can you still fix it?
Yes, we often do. Removing the old work can add time, and that is in the quote.
What happens once I’ve sent photos?
We look at the pictures and reply with a fixed price and some dates. If we need another angle, we will ask.
Is it worth repairing rather than replacing?
Generally, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. We will tell you honestly if replacement makes more sense.
Will a non-slip coating change how my bath looks?
Only slightly: it shows as a matt area where you stand.
What non-slip bath coating costs
Quotes are free and the price is fixed. What we take into account:
- Previous DIY repairs that have to come out
- The colour and finish to match
- Whether we combine several jobs
- What kind of damage it is
We charge the same wherever you are, so there’s no premium for Bekesbourne Hill. The job itself decides the price: the material, the amount of damage and how many items.
How to get a fixed quote
The better the pictures, the more accurate the price. Here’s what we find most useful:
- A photo taken from further back
- Natural light rather than flash
- A close-up of the damage, in focus
- The postcode, so we can plan the visit
If you are in Bekesbourne Hill and want a price, the easiest route is photos: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.
Places near Bekesbourne Hill
Also in Bekesbourne Hill
About our accreditations · Every repair comes with a one-year guarantee.
