Edinburgh · Scotland
Non-Slip Bath Coating for Bellevue homes
Local non-slip bath coating for Bellevue: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Worn-out textured areas
- Resurfaced baths that are now too smooth
- Bath mats that harbour mould or get forgotten
Our work in Bellevue
Bellevue is about 1 mile north-east of Edinburgh, in Edinburgh. From the centre of Bellevue to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. Bellevue is one of 175 places in Edinburgh we cover.
Here we cover the EH7, EH3 and EH2 postcode area. Streets in the area include York Lane, Meuse Lane and Canon Lane, and we cover them all. Bellevue is on the A900, so it’s easy for us to reach. If you’re just outside Bellevue, we cover Broughton (1 mile south-east), Canonmills (1 mile north-west), Gayfield (1 mile east), New Town (1 mile south-west) and Greenside (1 mile south-east). Within a short drive, we also cover Queensferry (8 miles west), South Portobello (3 miles east), Southhouse (4 miles south), Gilmerton (5 miles south-east), Slateford (3 miles south-west) and Gracemount (4 miles south). Bellevue is one of the larger places we cover in Edinburgh.
Near you in Bellevue
Around Bellevue, we work in homes near Drummond Community High School, St Cuthbert's Church and McDonald Road Library and the streets around them. Nearby too are London Street Primary School (within half a mile east), Public House (under half a mile south-east), King George V Park (less than half a mile west) and Free Church College (0.7 miles south). The nearest railway station is Edinburgh Waverley station, about 0.6 miles south. A little further out are Edinburgh Castle (0.9 miles south) and Victorian Pharmacy Museum (less than half a mile south-east). Green spaces nearby include Salisbury Crags and The New Leaf Co-op.
- Local churches include St Mary's Parish Church (within half a mile south-west)
Non-slip bath coating in Bellevue without replacing anything
It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. It’s popular with homes with older or less mobile people, holiday lets and families. Typical jobs include worn-out textured areas and safety for older or less mobile people, on acrylic baths, shower trays and enamelled baths.
The work is covered for a year after we finish. Just call us if there’s a problem and we’ll come back. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.
- Where
- Bellevue (EH7, EH3, EH2)
- County
- Edinburgh
- Guarantee
- A year, on every repair
- Price
- Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
The process
We begin by going over the job with you, so you know exactly what we’re doing. Next, we cover and mask everything nearby and we start. It normally takes a morning or an afternoon.
- First the standing area is cleaned and degreased.
- We mask out the area to be treated.
- We put on the clear non-slip coating.
- The masking comes off to leave a neat edge.
- Once it has cured, normally overnight, it’s ready.
Before we arrive
- Keep children and pets away from the room on the day
- Keep a parking space free if you can
- Let us know if it has been repaired before
How to get a price
There is no need for us to visit first. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Related advice
Repair or replace: which is better?
The alternatives are replacing the bath or tray with a textured one, or a bath mat that needs lifting and cleaning. A coating treats your existing bath or tray. We charge the same wherever you are, so there’s no premium for Bellevue. The job itself decides the price: how much damage, what it’s made of and how many items.
Why Bellevue clients choose us
- Normally one visit, start to finish
- No extra charge for your area
- CHAS, Constructionline and SafeContractor accredited
- Work done at your home or business
See our pricing.
When a repair is not the answer
Some problems need a builder, plumber or fitter rather than us:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Send us photos and we will tell you honestly.
Surfaces we repair
- Enamelled baths
- Acrylic baths
- Wet room floors (ask us)
- Shower trays
- Resurfaced baths
Landlord and trade work in Bellevue
Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
We work for landlords, letting agents and housing providers in Bellevue as well as homeowners. A repair between tenants keeps the property empty for less time, and it typically costs far less than a refit.
DIY repairs versus a professional job
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.
What non-slip bath coating costs
We charge the same across the UK, including Bellevue. What changes the price is:
- How many areas need work
- Whether it’s a chip, crack, burn or wear
- Any earlier repairs that need removing first
- Access to the area
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send pictures and we will give you the exact figure.
Getting a price from pictures
A couple of clear pictures is all it takes. Try to include:
- Natural light rather than flash
- A wider photo showing the entire bath or shower tray
- A clear, close picture of the problem area
- What it’s made of, if you know
Getting a price is easy: take a close-up of the damage and a photo from further back, send them to us with your postcode, and we will reply with a fixed price. There’s no charge for the quote and no obligation.
When to call us in Bellevue
Baths and trays are made smooth so they’re easy to clean, but with soap and water on them they become slippery. Textured areas on older baths wear smooth too.
Get in touch if you’ve noticed any of these:
- A bath or tray that is slippery when wet
- Resurfaced baths that are now too smooth
- Safety for older or less mobile people
- Worn-out textured areas
What to look for in a quote
- How to look after the finish
- How changes to the job are handled
- The length of the guarantee and what it covers
- A fixed quote, and whether VAT is included
Towns and villages near Bellevue
Other services in Bellevue
Your questions about non-slip bath coating in Bellevue
Can you price it without visiting?
Nearly always. We only ask to see it in person if the pictures can’t show what we need.
Do you come to Bellevue?
Yes. We work across the UK and come to Bellevue and the rest of Edinburgh. Send photos and we’ll quote, or call 0345 017 0787.
How do I clean it?
Yes. A soft brush and mild cleaner is all it needs.
Can you repair several things at once?
Yes, and it’s frequently cheaper. Just add the extra items to your photos and you will get one combined price.
Can you repair something that’s been repaired before?
In most cases. We remove the old repair before doing a new one, so mention it when you send photos.
How do I book?
Just pictures, your postcode and a contact number. On the day, we only need access to the room.
Will I see the coating?
Only slightly: the treated area looks slightly matt.
What happens after I send photos?
We check the damage, the material and your postcode, then reply with a quote.
About our accreditations · Every repair comes with a one-year guarantee.
