Edinburgh · Scotland

Non-Slip Bath Coating in Canonmills

Our repair technicians come to Canonmills for clear non-slip coatings for baths and shower trays. Nothing is taken out, with a one-year guarantee.

  • Resurfaced baths that are now too smooth
  • Bath mats that harbour mould or get forgotten
  • A bath or tray that is slippery when wet
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating near Canonmills

About our non-slip bath coating in Canonmills

It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. It’s popular with older people, families and holiday lets. Common call-outs are for a bath or tray that is slippery when wet and bath mats that harbour mould or get forgotten, in wet room floors (ask us), shower trays and acrylic baths.

You are covered after we leave: each job carries a one-year guarantee, and we explain what it covers before booking. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.

Area
Canonmills (EH3, EH7, EH2)
Area hub
Edinburgh
Warranty
A year, on every repair
Quote
Fixed and free, based on pictures
Call
0345 017 0787
Page updated
23 October 2026
Discoloured square shower tray restored with a new white finish

About Canonmills

Canonmills is about 1 mile north of Edinburgh, in Edinburgh. Whether you are in the middle of Canonmills or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. We work in all 175 towns and villages across Edinburgh.

Our technicians cover all of EH3, EH7 and EH2. We regularly work on streets such as York Lane, Canon Lane and Circus Lane. If you’re just outside Canonmills, we cover Bellevue (1 mile south-east), Powderhall (1 mile north-east), New Town (1 mile south), Broughton (1 mile south-east) and Gayfield (1 mile south-east). We also work in nearby towns such as Queensferry (8 miles west), South Portobello (3 miles east), Southhouse (5 miles south), Gilmerton (5 miles south-east), Slateford (3 miles south-west) and Gracemount (4 miles south).

Around Canonmills

Around Canonmills, we work in homes near Drummond Community High School, Stockbridge public library and Hamilton's Bar & Kitchen. Nearby too are Edinburgh (under half a mile south), Free Church College (0.9 miles south), King George V Park (under half a mile south-east) and London Street Primary School (0.5 miles south-east). The nearest railway station is Edinburgh Waverley station, about 0.8 miles south-east. Nearby you will also find St. James Centre (0.7 miles south-east) and Edinburgh Castle (1 mile south). Green spaces nearby include Dunsapie Loch and The New Leaf Co-op.

  • Local churches include St Cuthbert's Church (0.9 miles south)
Map of Canonmills © OpenStreetMap contributors

How it works

Visits start with a quick look at the job together, so you know exactly what we’re doing. Next, we cover and mask everything nearby and the work begins. Allow a morning or an afternoon.

  1. We clean and degrease the standing area.
  2. The area to be treated is masked out.
  3. We put on the clear non-slip coating.
  4. We lift the masking for a clean edge.
  5. Once it has cured, normally overnight, it’s ready.

Preparing for the visit

  • Tell us about parking, stairs or access
  • Ensure the area is dry
  • Tell us if there are stairs or a lift

Getting a price

Email us a picture of the damage and a wider shot of the whole item, and tell us you are in Canonmills, and we will come back with a fixed quote.

Send photos for a quote

Read more

Should I try a DIY kit first?

For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.

It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.

What a repair can’t fix

Some jobs are not right for a repair, for example:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

If in doubt, send photos and we’ll say what we think before booking.

Materials we work on in Canonmills

  • Resurfaced baths
  • Enamelled baths
  • Shower trays
  • Wet room floors (ask us)
  • Acrylic baths

Common questions in Canonmills

Will I see the coating?

Very little: it shows as a matt area where you stand.

What if the damage is worse than the photos show?

Your quote covers the damage in the pictures. If there’s more, we will tell you before starting.

I rent my home. Can I book you?

We can work for tenants, landlords or agents. Just make sure the landlord agrees.

Can pets and children be at home?

Please keep children and pets out of the room during the visit and until it has cured. The rest of the house is unaffected.

How much does non-slip bath coating cost in Canonmills?

Because every job differs, we price from pictures. You’ll get a fixed figure before booking.

Will it make a mess?

No. The work area is masked and covered, and we take our waste away with us.

Can I add another job to the visit?

Of course, and it usually saves money. Just add the extra items to your photos and we’ll quote them together.

Can you quote from pictures?

Nearly always. We only ask to see it in person if the photos cannot show what we need.

Landlord and trade work in Canonmills

Letting agents often send us photos straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.

We work for landlords, letting agents and housing providers in Canonmills as well as householders. A repair between tenants keeps the property empty for less time, and it normally costs far less than a refit.

What we’re called out for in Canonmills

Baths and trays are made smooth so they’re easy to clean, but wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.

Common reasons people in Canonmills contact us include:

  • A bath or tray that is slippery when wet
  • Worn-out textured areas
  • Bath mats that harbour mould or get forgotten
  • Resurfaced baths that are now too smooth

What to look for in a quote

  • If travel is included in the price
  • How changes to the job are handled
  • When it can be used again
  • What the guarantee covers, and for how long

10 questions to ask before you book

Should you replace it?

Instead, you could go for a new textured bath or tray, or relying on a mat that needs lifting and cleaning. A coating adds grip to the bath you have. A repair is priced on what needs doing, not your postcode. You’ll see the full price before you book, with no extras added later.

Why Canonmills clients choose us

  • Free fixed quotes from pictures
  • Accredited with CHAS, Constructionline and SafeContractor
  • Most jobs done in one visit
  • One-year guarantee on every repair

Read our prices page.

What non-slip bath coating costs

You will know the full cost before booking. We look at:

  • What the surface is made of
  • Unusual colours or finishes
  • Previous DIY repairs that have to come out
  • Whether it’s a chip, crack, burn or wear

Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it, and doing several items at once reduces it.

Send photos for a quote

You can usually get a fixed price without us visiting. To help us price it:

  • One picture of the entire bath or shower tray
  • A coin beside the damage so we can judge size
  • The postcode, so we can plan the visit
  • Whether it’s been repaired or coated before

To get a price, send a couple of photos through our quote form or call us. We will tell you honestly whether it can be repaired.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.