Surrey · England
Non-slip bath & shower coating in Belmont, Surrey
Non-slip bath coating for Belmont, without a refit. Get a fixed price from your photos, then book a visit.
- Safety for older or less mobile people
- A bath or tray that is slippery when wet
- Resurfaced baths that are now too smooth
About Belmont
Belmont is about 2 miles south of Sutton, in Surrey. Across the SM2 area, a technician comes to you. Belmont is one of 395 places in Surrey where we work. Our jobs stretch from Belmont to London (about 12 miles away).
We cover every part of the SM2 and SM5 postcode area. Jobs here include addresses on The Avenue, Sandy Lane and Downs Road and the roads around them. Neighbouring places we cover include Cheam (1 mile north-west), Cuddington (2 miles north-west), North Looe (2 miles west), Nork (2 miles south-west) and North Cheam (2 miles north). Further out, we also cover Epsom (3 miles west), Horley (11 miles south), Redhill (7 miles south), Reigate (7 miles south), Walton-on-Thames (9 miles west) and Caterham (6 miles south-east).
Landmarks near Belmont
Typical jobs here are in homes near Howell Hill, Glaisdale School and Church of St John, among other places. You’ll also find Harris Academy Sutton (0.5 miles north-east) and Avenue Primary Academy (within half a mile north). Belmont has its own railway station: Belmont station. Well-known places in the area include Municipal Borough of Sutton and Cheam (1.2 miles north) and Sutton Hospital (under half a mile east). Green spaces nearby include Duppas Hill and Belmont Pastures.
About our non-slip bath coating in Belmont
It suits older people, families and holiday lets. It’s a clear, textured coating, so the bath looks much the same. Common call-outs are for worn-out textured areas and safety for older or less mobile people, on enamelled baths, wet room floors (ask us) and shower trays.
Every job is backed for twelve months. If something goes wrong with the work, we come back. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.
- Location
- Belmont (SM2, SM5)
- County
- Surrey
- Guarantee
- 12 months on all our work
- Quote
- Free and fixed, from your photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
What happens on the day
Once we’re through the door, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the work takes a few hours, and we finish with a tidy-up and a look at the finished work together.
- We start by degreasing the area where you stand.
- The area to be treated is masked out.
- We put on the clear non-slip coating.
- We remove the masking for a neat edge.
- Once it has cured, normally overnight, it’s ready.
How to prepare
- Tell us if there are stairs or a lift
- Have a window or extractor fan available
- Mention any parking restrictions or tricky access
Get a quote
A quote takes minutes to ask for: photograph the damage, then the entire bath or shower tray, include your postcode and send them over. What comes back is a fixed price, not a guess.
Advice
Your questions about non-slip bath coating in Belmont
Can tenants book a repair?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
Can you repair several things at once?
Yes. Doing several items on one visit normally costs less than separate visits. Send pictures of everything you’d like done.
Can landlords book you?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses across Surrey.
Do you come to Belmont?
Yes. We cover the whole UK and come to Belmont. Send pictures and we will quote, or call 0345 017 0787.
Will I see the coating?
Very little: the treated area looks slightly matt.
Is a repair better than a new one?
In most cases, yes. A repair skips the removal, fitting and redecorating. We’ll be honest if it’s not worth it.
Can you redo someone else’s repair?
Yes, regularly. Removing the old work can add time, and that is in the quote.
Are there extra charges for Belmont?
Travel is included in the price, with the same prices everywhere we work.
Towns and villages near Belmont
Also in Belmont
DIY repairs versus a professional job
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it doesn’t stop a professional repair. Just mention it when you send pictures, as it can add time.
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and don’t use it until it has fully cured. If it fails, we can still put it right.
Repair or replace in Belmont?
Instead, you could go for replacing the bath or tray with a textured one, or a bath mat that needs lifting and cleaning. A non-slip coating treats your existing bath or tray. No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
Why Belmont customers choose us
- Dust sheets down, tidy finish
- We’ll tell you if it’s not worth repairing
- Everything repaired in place
- Same prices wherever you are
Take a look at our pricing.
What affects the price in Belmont
Every quote is fixed and free. What we take into account:
- Whether old repairs or coatings need taking off
- How easy the damage is to reach
- Whether it’s a chip, crack, burn or wear
- The size and number of damaged areas
Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access, and doing several items at once reduces it.
How to get a fixed quote
Before you send photos, these tips help us give you a firm price:
- Your postcode, so we can check dates
- A coin or ruler next to the damage for scale
- The material, if you know it
- One picture of the whole bath or shower tray
You don’t need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
Do you need non-slip bath coating in Belmont?
Baths and trays are made smooth so they’re easy to clean, but with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.
Contact us if you’ve noticed any of these:
- Bath mats that harbour mould or get forgotten
- A bath or tray that is slippery when wet
- Worn-out textured areas
- Safety for older or less mobile people
Comparing quotes
- Aftercare advice
- When it can be used again
- What preparation is included
- Whether there are any call-out or travel charges
Landlord and trade work in Belmont
We regularly work with letting and managing agents. Just send pictures, the address and how to get access and we’ll handle the rest.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We’re CHAS, Constructionline and SafeContractor accredited.
When a repair is not the answer
A repair isn’t always the answer, and we will tell you before we start. We cannot fix:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
If in doubt, send photos and we’ll say what we think.
Materials we work on in Belmont
- Resurfaced baths
- Acrylic baths
- Wet room floors (ask us)
- Enamelled baths
- Shower trays
About our accreditations · Every repair comes with a one-year guarantee.
