Devon · England
Non-slip bath & shower coating in Belstone Corner, Devon
Our technicians come to Belstone Corner for clear non-slip coatings for baths and shower trays. Everything is done in place, and the work is guaranteed.
- Worn-out textured areas
- Resurfaced baths that are now too smooth
- A bath or tray that is slippery when wet
How it works
We agree an arrival time beforehand, so you know when to expect us. Once we are there, the work takes a morning or an afternoon for most jobs. The room is left tidy and you’ll know when it can be used.
- First the standing area is cleaned and degreased.
- We mask out the area to be treated.
- The clear textured coating is applied.
- The masking comes off to leave a neat edge.
- The coating is left to cure before use, typically overnight.
Getting ready for the visit
- Plan for the room to be out of bounds to pets and children
- Let us know about parking or access
- Let us know which floor the room is on
Get a quote
Pricing is simple: snap the damage close up and then the entire item, send them to us with your postcode, and you will get a fixed quote back. Quotes are free and no obligation.
Advice
Non-slip bath coating in Belstone Corner without replacing anything
It’s popular with older people, families and holiday lets. It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. We’re often asked to fix a bath or tray that is slippery when wet and resurfaced baths that are now too smooth, in shower trays, acrylic baths and enamelled baths.
We guarantee the work for a year. If there’s a problem with the repair within the year, we return and sort it. A soft brush and mild cleaner keep it clean. Don’t use abrasive pads on the textured area.
- Area
- Belstone Corner (EX20)
- Region
- Devon
- Warranty
- 12 months on all our work
- Quotes
- Free and fixed, from your pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Should you replace it?
Instead, you could go for replacing the bath or tray with a textured one, or relying on a mat that needs lifting and cleaning. A coating treats your existing bath or tray. We charge the same wherever you are, so there’s no premium for Belstone Corner. The job itself decides the price: how much damage, what it’s made of and how many items.
Why us?
- Rooms protected and left tidy
- Honest advice, even when it means no job
- Normally one visit, start to finish
- A fixed quote before you book
Read our pricing.
What we can’t put right
To be straight with you, some problems need a different fix:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Not sure? Send photos and we will give you a straight answer.
Materials we repair
- Enamelled baths
- Shower trays
- Acrylic baths
- Resurfaced baths
- Wet room floors (ask us)
How we price non-slip bath coating
We do not charge extra for travel to Belstone Corner. The price depends on:
- Whether it’s a chip, crack, burn or wear
- The size and number of damaged areas
- Any earlier repairs that need removing first
- Where the damage is and how we get to it
The price depends on the type and amount of damage, the material and how many jobs we combine into one visit. We give a fixed quote from your photos, so you know the cost before booking.
Send photos for a quote
We price nearly every job from photos. This is what to send:
- What it’s made of, if you know
- Daylight if possible, and no flash reflection
- A clear, close picture of the problem area
- A coin beside the damage so we can judge size
A quote takes minutes to ask for: photograph the damage, then the entire bath or shower tray, include your postcode and send them to us. What comes back is a fixed quote, not a guess.
Common problems we fix in Belstone Corner
Smooth surfaces are easy to clean, yet with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.
Send us a picture if you notice any of these:
- Worn-out textured areas
- Resurfaced baths that are now too smooth
- A bath or tray that is slippery when wet
- Bath mats that harbour mould or get forgotten
Comparing quotes
- Whether the colour is mixed to match
- What prep work is covered
- How changes to the job are handled
- Whether a trained technician does the job
Landlords, agents and businesses in Belstone Corner
If you manage property in Belstone Corner, we can repair and quote for several addresses together. Send photos for each one and we’ll price them together.
We work for landlords, letting agents and housing providers in Belstone Corner as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
Covering Belstone Corner
Belstone Corner is about 18 miles north-east of Tavistock, in Devon. Jobs in Belstone Corner are booked in like any other job: a fixed quote from photos, and a technician at your door on the day. Belstone Corner is one of 586 towns and villages in Devon where we work.
All of EX20 is covered, from the main roads to the quietest streets. We also travel to Sampford Chapple (2 miles north), Sampford Courtenay (2 miles north), Stockley (3 miles south-west), Okehampton (3 miles south-west) and Sticklepath (3 miles south). Further out, we also cover Crediton (13 miles east), Great Torrington (15 miles north-west), Hatherleigh (7 miles north-west), North Tawton (3 miles north-east), Winkleigh (6 miles north) and Chagford (8 miles south-east).
Around Belstone Corner
Our clients here include homes close to Countryman pub. The nearest railway station is Okehampton Interchange station, roughly 2.4 miles south-west of the centre. Other landmarks nearby include Museum of Policing in Devon and Cornwall (3.1 miles south-west) and Okehampton Community Hospital (3 miles south-west). Not far away are Cosdon Hill.
DIY kit or professional repair?
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
If you’re set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
Your questions about non-slip bath coating in Belstone Corner
Can I add another job to the visit?
Yes. Doing several items on one visit typically costs less than separate visits. Include photos of each item.
Do I have to be there?
We need someone to let us in. After that, you can carry on with your day.
How much does non-slip bath coating cost in Belstone Corner?
Every job gets a fixed price from your pictures. Send a close-up of the damage and a wider photo and your postcode.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as homeowners.
Is my repair covered?
Yes, for a year. If there’s a problem with the work in that time, we come back and put it right.
Will there be a smell?
Expect a mild smell while we are working, which fades afterwards.
Can you redo someone else’s repair?
Yes, we frequently do. Removing the old work can add time, and that is in the quote.
How quickly can you book me in?
Your quote comes with available dates. Tell us if you need it done quickly.
Nearby places to Belstone Corner
What else we do in Belstone Corner
About our accreditations · Every repair comes with a one-year guarantee.
