Leicestershire · England
Non-slip bath & shower coating in Belton, Leicestershire
Non-slip bath coating across Belton and nearby, done in a single visit in most cases and guaranteed for a year.
- A bath or tray that is slippery when wet
- Resurfaced baths that are now too smooth
- Safety for older or less mobile people
Non-slip bath coating in Belton without replacing anything
It’s popular with older people, families and holiday lets. The coating is clear and textured, so the bath looks much the same. If you are dealing with a bath or tray that is slippery when wet and resurfaced baths that are now too smooth, we can usually put it right, on enamelled baths, wet room floors (ask us) and acrylic baths alike.
A one-year guarantee comes as standard, so you’re covered after the visit. A soft brush and mild cleaner keep it clean. Do not use abrasive pads on the textured area.
- Where
- Belton (LE12)
- Region
- Leicestershire
- Warranty
- 12 months on all our work
- Price
- Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
DIY repairs versus a professional job
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and do not use it until it has fully cured. If it fails, we can still put it right.
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.
Questions from Belton
What does non-slip bath coating cost?
We give a fixed quote based on pictures of the damage. Send a close-up and a photo of the whole item and your postcode.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as homeowners in Belton.
Is it OK to have pets in the house?
Please keep children and pets out of the room during the visit. Everywhere else in the home is fine.
Is my repair covered?
Every repair comes with a one-year guarantee. We will explain what it covers when we quote.
What happens if you find more damage?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
When can you do it?
That depends on our diary for your area. We’ll offer you dates when we send your quote.
Will I see the coating?
Very little: it shows as a matt area where you stand.
Do you charge for travel?
Travel is included in the price, with the same prices everywhere we work.
Our work in Belton
Belton is about 2 miles north-west of Shepshed, in Leicestershire. Whether you’re in the middle of Belton or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. Our technicians cover 287 places across Leicestershire. We work right across the region, from Belton to Birmingham (about 32 miles away).
Every address in LE12 is covered, from the main roads to the quietest streets. Whether you live on Sandhills Close, Sadlers Wells and De Verdun Avenue or a nearby road, a technician can come to you. We also cover the places around Belton: Osgathorpe (1 mile south-west), Thringstone (2 miles south-west), Griffydam (2 miles south-west), Worthington (2 miles west) and Peggs Green (3 miles south-west). We also work in nearby towns such as Loughborough (5 miles east), Coalville (4 miles south), Ashby-de-la-Zouch (6 miles west), Syston (13 miles south-east), Shelthorpe (6 miles east) and Earl Shilton (14 miles south).
Landmarks near Belton
Locally, our jobs take us to homes close to The George Public House, Belton Church of England Primary School and Hind Leys Community College and the streets around them. Further afield, we also cover the area around East Midlands Aeropark (3.6 miles north) and Aston Hall Hospital (5.7 miles north). Open spaces near Belton include Bardon Hill and Charnwood Lodge.
Honest limits
We would rather lose a job than do one that will not last, so here’s what a repair can’t put right:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
If in doubt, send photos and we will say what we think.
Materials we work on in Belton
- Wet room floors (ask us)
- Shower trays
- Acrylic baths
- Enamelled baths
- Resurfaced baths
Why repair rather than replace?
Instead, you could go for a new textured bath or tray, or relying on a mat, which traps water and needs cleaning. A coating treats your existing bath or tray. Set against the cost of replacement, a repair is generally a fraction of the price, because there’s no removal, plumbing or making good. The quote lists exactly what you’re paying for.
Why Belton customers choose us
- Everything repaired in place
- A fixed quote before booking
- No extra charge for your area
- Most jobs done in one visit
Take a look at our full price list.
What affects the price in Belton
Quotes are free and the price is fixed. What we take into account:
- How much damage there is
- What kind of damage it is
- Unusual colours or finishes
- Previous DIY repairs that have to come out
The price depends on the type and amount of damage, what it’s made of and how many items we do on one visit. You get a fixed price from your pictures, so you know the cost before you book.
How to get a fixed price
You can take the photos on your phone. Just make sure we can see:
- Your postcode, so we can check dates
- A picture taken from further back
- One sharp close-up of the damage
- Details of any past repairs
For a price in Belton, the easiest route is photos: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.
What happens on the day
You don’t need to empty the room beforehand. Everything we use comes in the van with us, lay protective sheets and start once you’re happy with the plan. It typically takes a few hours, and you can get on with other things while we are there.
- We start by degreasing the area where you stand.
- Next we mask off the area.
- We put on the clear non-slip coating.
- We lift the masking for a clean edge.
- We leave it to cure, normally overnight.
Getting ready for the visit
- Open a window if you can
- Have somewhere for us to park nearby if possible
- Tell us about parking, stairs or access
Get a quote
You do not need a survey visit. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Read more
Common problems we fix in Belton
Baths and trays are made smooth so they’re easy to clean, but with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.
Keep an eye out for these signs:
- A bath or tray that is slippery when wet
- Bath mats that harbour mould or get forgotten
- Resurfaced baths that are now too smooth
- Safety for older or less mobile people
Questions to ask before booking
- What protection goes down before work starts
- What the guarantee covers, and for how long
- What happens if the damage is worse than the photos show
- How soon you can use it again
Other services in Belton
Work for landlords and builders
Landlords, letting agents and housing providers in Belton use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it normally costs far less than a refit.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
About our accreditations · Every repair comes with a one-year guarantee.
