Lancashire · England
Non-slip bath & shower coating in Beverley, Lancashire
Our technicians come to Beverley for clear non-slip coatings for baths and shower trays. Everything is done in place, with a one-year guarantee.
- Safety for older or less mobile people
- Worn-out textured areas
- A bath or tray that is slippery when wet
Non-slip bath coating in Beverley without replacing anything
The coating is clear and textured, so it shows only as a slightly matt area where you stand. It suits older people, families and holiday lets. If you are dealing with bath mats that harbour mould or get forgotten and worn-out textured areas, we can usually put it right, whatever the material.
We stand behind the work with a one-year guarantee, so you’re covered after the visit. A soft brush and mild cleaner keep it clean. Avoid scourers on the coating.
- Where
- Beverley (BB9)
- Region
- Lancashire
- Cover
- One year on every repair
- Price
- Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
The process
On the day, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. Expect it to take a morning or an afternoon. We clean up when we’re done and let you know when you can use it again.
- First the standing area is cleaned and degreased.
- Next we mask off the area.
- We apply the clear textured coating.
- We lift the masking for a clean edge.
- Once it has cured, normally overnight, it’s ready.
How to prepare
- Tell us about any previous repairs or coatings
- Have somewhere for us to park nearby if possible
- Let us know about parking or access
How to get a price
The quickest way to a price is to send a couple of pictures through our quote form or ring us. We will tell you honestly if a repair is the right fix.
Read more
Why repair rather than replace?
Instead, you could go for replacing the bath or tray with a textured one, or a bath mat that needs lifting and cleaning. A non-slip coating treats your existing bath or tray. Instead of hourly rates, we fix the price before we start. Damage, material and access decide it.
What you get with us
- Generally one visit, start to finish
- Accredited with CHAS, Constructionline and SafeContractor
- Straight answers about what a repair can do
- Technicians who travel to you, UK-wide
Read our full price list.
Should I try a DIY kit first?
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
For landlords and businesses
Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.
We carry out planned and one-off repairs for housing associations and facilities teams in Lancashire and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
When a repair is not the answer
We’d rather lose a job than do one that will not last, so here’s what a repair can’t put right:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
If in doubt, send photos and we will say what we think before you book.
What we work on
- Enamelled baths
- Resurfaced baths
- Shower trays
- Acrylic baths
- Wet room floors (ask us)
Signs you need non-slip bath coating in Beverley
Baths and trays are made smooth so they’re easy to clean, yet with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.
The most common problems we’re called about are:
- A bath or tray that is slippery when wet
- Worn-out textured areas
- Bath mats that harbour mould or get forgotten
- Resurfaced baths that are now too smooth
Questions to ask before you book
- How the colour is matched
- What happens if they find more damage
- How your room will be protected
- What prep work is covered
Also near Beverley
What else we do in Beverley
Beverley: your questions answered
Do you do work for letting agents?
Yes. We work for landlords, agents, builders and businesses as well as homeowners.
Can you repair something that is been repaired before?
Generally, yes. Let us know what was used before and we will plan for it.
Is it messy?
Dust sheets and masking go down before we start, and we clean up when we have finished.
Is it safe with children and pets around?
Please keep children and pets out of the room during the visit and until it has cured. The rest of the house is unaffected.
How do I clean it?
Yes. A soft brush and mild cleaner is all it needs.
I’m a tenant. Can you help?
Of course. Ask your landlord first, and we can send them the quote if that helps.
Will a non-slip coating change how my bath looks?
Very little: it shows as a matt area where you stand.
Do you cover Beverley?
Yes. We work across the UK and come to Beverley and the rest of Lancashire. Send us photos for a fixed quote, or call 0345 017 0787.
What affects the price in Beverley
Every quote is fixed and free. What we look at:
- Access to the area
- Any earlier repairs that need removing first
- What the surface is made of
- What kind of damage it is
Compared with replacing, repairing generally costs far less, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Getting a price from photos
Most quotes are done from pictures alone. To help us price it:
- The material, if you know it
- One picture of the whole bath or shower tray
- Your postcode, so we can check dates
- Natural light rather than flash
A quote takes minutes to ask for: photograph the damage, then the whole bath or shower tray, include your postcode and send them to us. You will get a fixed quote, not an estimate.
Beverley and the surrounding area
Beverley is about 2 miles north-west of Colne, in Lancashire. Across the BB9 area, we come to you. We cover 482 places in Lancashire, from the larger towns to small villages. Our jobs stretch from Beverley to Manchester (about 27 miles away).
We cover every part of the BB9 postcode area and the streets around it. From Beverley Road, Willaston Avenue and Back Gisburn Road or anywhere nearby, we can come to you. If you are just outside Beverley, we cover Blacko (1 mile north-west), Higherford (1 mile south), Roughlee (1 mile south-west), Barrowford (1 mile south) and Thorney Holme (2 miles south-west). We also work in nearby towns such as Burnley (6 miles south), Accrington (10 miles south-west), Rawtenstall (12 miles south), Clitheroe (7 miles west), Haslingden (13 miles south) and Bacup (12 miles south).
What’s near Beverley
Typical jobs here are in homes near Blacko Primary School, Colne Primet Academy and Rising Sun pub. For rail, the closest station is Colne station, about 1.6 miles south-east of the centre. Other landmarks nearby include Pendle Community Hospital (2.1 miles south) and Colne Public Library And Museum (1.7 miles south-east). The countryside around Beverley includes Weets Hill.
About our accreditations · Every repair comes with a one-year guarantee.
