Lancashire · England
Non-slip bath & shower coating in Bickerstaffe, Lancashire
Non-slip bath coating for Bickerstaffe, without a refit. Send us photos for a fixed quote, then book a visit.
- Worn-out textured areas
- Bath mats that harbour mould or get forgotten
- A bath or tray that is slippery when wet
How we handle non-slip bath coating in Bickerstaffe
It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. It’s popular with older people, families and holiday lets. Typical jobs include safety for older or less mobile people and bath mats that harbour mould or get forgotten, across shower trays, resurfaced baths and acrylic baths.
Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before you book. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.
- Where
- Bickerstaffe (L39)
- Region
- Lancashire
- Guarantee
- A year, on every repair
- Quotes
- Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
What happens on the day
The work is clean and fairly quiet, so you can carry on at home. Protection goes down first, then the work takes a few hours. Before we leave, we explain the curing time and the aftercare.
- First the standing area is cleaned and degreased.
- The area to be treated is masked out.
- We apply the clear textured coating.
- We remove the masking for a neat edge.
- We leave it to cure, normally overnight.
Preparing for the visit
- Mention if the room is upstairs or in a flat
- Point us to the nearest place to park
- Tell us about any previous repairs or coatings
Ask for a price
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.
Advice
Also near Bickerstaffe
More services for Bickerstaffe
Our work in Bickerstaffe
Bickerstaffe is about 3 miles south-west of Skelmersdale, in Lancashire. Clients in Bickerstaffe get the same service as everywhere else we cover: a fixed quote from photos, and a technician at your door on the day. We work in 482 places across Lancashire. You can also see our page for Liverpool, about 9 miles away.
Jobs in L39 work the same way as everywhere else we cover. Neighbouring places we cover include Barrow Nook (1 mile south), Stanley Gate (1 mile north), Four Lane Ends (1 mile north-east), Royal Oak (2 miles west) and Blaguegate (2 miles north-east). Further out, we also cover Chorley (12 miles north-east), Bamber Bridge (15 miles north-east), Leyland (13 miles north-east), Skelmersdale (3 miles north-east), Ormskirk (3 miles north-west) and Penwortham (15 miles north).
Local landmarks in Bickerstaffe
Our clients here include homes close to Bickerstaffe Voluntary Controlled Church of England School and Church of Holy Trinity and the streets around them. The nearest railway station is Rainford station, about 2.2 miles east of the centre. Other landmarks nearby include Ormskirk and District General Hospital (2.7 miles north-west).
Landlords, agents and businesses in Bickerstaffe
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
Landlords, letting agents and housing providers in Bickerstaffe use us as well as householders. Repairing between tenancies keeps void periods short, and it typically costs far less than a refit.
What affects the price in Bickerstaffe
There is no charge for travel to Bickerstaffe. The price depends on:
- Previous DIY repairs that have to come out
- Unusual colours or finishes
- Doing more than one item at once
- The material
No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
Getting a price from pictures
We price nearly every job from pictures. This is what to send:
- Details of any past repairs
- A wider photo showing the entire bath or shower tray
- A clear, close picture of the problem area
- Your postcode, so we can check dates
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the whole bath or shower tray, we can price the job without visiting.
What we’re called out for in Bickerstaffe
Smooth surfaces are easy to clean, yet with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.
The most common problems we are called about are:
- Worn-out textured areas
- Resurfaced baths that are now too smooth
- Bath mats that harbour mould or get forgotten
- Safety for older or less mobile people
Before you book anyone
- What the guarantee covers, and for how long
- How your room will be protected
- Is the price fixed, and does it include VAT?
- What happens if the damage is worse than the pictures show
Bickerstaffe: your questions answered
What happens once I’ve sent pictures?
We check the damage, the material and your postcode, then reply with a quote.
Can you repair something that’s been repaired before?
Yes, we frequently do. Removing the old work can add time, and that is in the quote.
Can you repair several things at once?
Of course, and it generally saves money. Send pictures of everything together and you’ll get one combined price.
How much does non-slip bath coating cost in Bickerstaffe?
Every job gets a fixed price based on photos of the damage. Send a close-up and a photo of the entire item and your postcode.
How do I clean it?
Yes. Use a soft brush and a mild cleaner.
I’m a tenant. Can you help?
Yes. Ask your landlord first, and we can send them the quote if that helps.
Will you leave a mess?
We protect the room with dust sheets and masking first, and we clean up when we have finished.
Is there a call-out fee?
We don’t add a call-out fee. Your fixed price includes everything.
What a repair can’t fix
We would rather lose a job than do one that won’t last, so here’s what a repair can’t put right:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Send us photos and we will tell you honestly.
Materials we repair
- Resurfaced baths
- Acrylic baths
- Enamelled baths
- Shower trays
- Wet room floors (ask us)
Should I try a DIY kit first?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is typically the cheaper route.
Repair or replace: which is better?
Instead, you could go for replacing the bath or tray with a textured one, or a bath mat that needs lifting and cleaning. A non-slip coating treats your existing bath or tray. A repair usually costs much less than people expect, especially compared with replacing and refitting. Send photos and we will give you the exact figure.
Why us?
- Rooms protected and left tidy
- Straight answers about what a repair can do
- Accredited with CHAS, Constructionline and SafeContractor
- Fixed prices from your pictures
Take a look at our prices page.
About our accreditations · Every repair comes with a one-year guarantee.
