Shropshire · England

Non-slip bath & shower coating in Binweston, Shropshire

Non-slip bath coating across Binweston and nearby, done in a single visit in most cases and guaranteed for a year.

  • Bath mats that harbour mould or get forgotten
  • Worn-out textured areas
  • Resurfaced baths that are now too smooth
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating in Binweston

Non-slip bath coating at your home in Binweston

The coating is clear and textured, so it shows only as a slightly matt area where you stand. It’s popular with older people, families and holiday lets. Our technicians work on wet room floors (ask us), resurfaced baths and acrylic baths, and common reasons people get in touch are safety for older or less mobile people and resurfaced baths that are now too smooth.

Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before booking. A soft brush and mild cleaner keep it clean. Don’t use abrasive pads on the textured area.

Area
Binweston (SY5)
County
Shropshire
Cover
A year, on every repair
Price
Free, fixed price from pictures
Telephone
0345 017 0787
Last updated
23 October 2026
Stained shower tray resurfaced to clean white, before and after

Repair or replace: which is better?

The alternatives are replacing the bath or tray with a textured one, or relying on a mat, which traps water and needs cleaning. A coating adds grip to the bath you have. There are no surprise extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.

Why us?

  • We come to you, anywhere in the UK
  • We leave the room as we found it
  • We’ll tell you if it’s not worth repairing
  • CHAS, Constructionline and SafeContractor accredited

Read our pricing.

Honest limits

We’d rather lose a job than do one that won’t last, so here’s what a repair can’t put right:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Send us photos and we’ll tell you honestly.

Materials we work on in Binweston

  • Wet room floors (ask us)
  • Enamelled baths
  • Shower trays
  • Resurfaced baths
  • Acrylic baths

Your questions about non-slip bath coating in Binweston

Will you leave a mess?

Very little mess: we sheet and mask everything nearby, and we leave the room clean.

What happens next?

You’ll get a fixed quote back, plus dates. There is no obligation to book.

Can landlords book you?

Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses in Binweston.

Can tenants book a repair?

We are happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.

Can you price it without visiting?

In nearly every case. We only ask to see it in person if the pictures cannot show what we need.

Is it worth repairing rather than replacing?

Generally, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we’ll tell you.

Can you repair several things at once?

Of course, and it normally saves money. Just add the extra items to your pictures and we’ll quote them together.

Can you redo someone else’s repair?

Typically, yes. We remove the old repair before doing a new one, so mention it when you send pictures.

Binweston and nearby

Binweston is about 13 miles south-west of Shrewsbury, in Shropshire. Our repair technicians come to homes and businesses in Binweston and nearby villages, so there is no workshop to go to. Our technicians cover all 433 towns and villages in Shropshire. You can also see our page for Birmingham, about 49 miles away.

Postcode districts we cover here: SY5. Other places close to Binweston include Brockton (1 mile east), Brunant (4 miles north-west), Nelly Andrews' Green (4 miles north-west), Buttington (4 miles north-west) and Cefn (4 miles north-west). We also work in nearby towns such as Shrewsbury (13 miles north-east), Coleham (13 miles north-east), Kingsland (13 miles north-east), Belle Vue (13 miles east), Monkmoor (14 miles north-east) and Bagley (13 miles north-east).

Around Binweston

Typical jobs here are in homes near The Lowfield Inn, among other places. The nearest railway station is Welshpool station, roughly 4.7 miles north-west. A little further out are Marton The Mount (1.2 miles south-west) and Victoria Memorial Hospital (5 miles north-west). For a walk, there is Long Mountain and Llyn Coed-y-Dinas.

Map of Binweston © OpenStreetMap contributors

What happens on the day

When we visit, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. Expect it to take a few hours. We tidy up before we leave and tell you when it’s ready to use.

  1. We start by degreasing the area where you stand.
  2. Next we mask off the area.
  3. The clear textured coating is applied.
  4. The masking comes off to leave a neat edge.
  5. We leave it to cure, generally overnight.

Before we arrive

  • Keep a parking space free if you can
  • Have a window or extractor fan available
  • Mention any earlier repairs or resurfacing

Ask for a price

You don’t need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.

Send photos for a quote

Related advice

DIY kit or professional repair?

For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.

Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is normally cheaper.

For landlords and businesses

Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip.

Hospitality businesses cannot afford rooms out of action for long, so we keep visits short and tidy. We will fit around changeovers where we can.

Common problems we fix in Binweston

Baths and trays are made smooth so they’re easy to clean, but with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.

If you can see any of these, send us a photo:

  • Worn-out textured areas
  • A bath or tray that is slippery when wet
  • Bath mats that harbour mould or get forgotten
  • Safety for older or less mobile people

Questions to ask before booking

  • Who will actually do the work
  • Whether there are any call-out or travel charges
  • Whether the price is fixed and includes VAT
  • How the room is protected while they work

10 questions to ask before you book

Prices and what affects them

There are no hourly rates or hidden extras. The price depends on:

  • The size and number of damaged areas
  • Unusual colours or finishes
  • The material
  • Whether old repairs or coatings need taking off

Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send pictures and we’ll give you the exact figure.

How to get a fixed quote

Phone photos are fine. Just make sure we can see:

  • Where you are, by postcode
  • A close-up of the damage, in focus
  • The material, if you know it
  • Natural light rather than flash

Most customers in Binweston get their price from pictures. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.