Shropshire · England
Bath Repair for Binweston homes
Bath repair for Binweston, without a refit. Get a fixed price from your pictures, then book a visit.
- Repairs from £95
- Scuffs and scratches in the surface
- A hole punched through by something heavy
Aftercare tips
Nothing complicated is needed:
- Cover the bath during DIY or decorating
- Keep metal cans and razors off the surface
- Avoid scourers, wire wool and gritty cream cleaners
- Stick to mild cleaners and a soft cloth
In the first few days, avoid putting weight or bottles on the repair. After that, normal gentle cleaning is fine without abrasive products.
Avoid standing in a cracked acrylic bath until it’s fixed. Each time it flexes, the crack grows, and water can get through to the floor below.
Bath repair in Binweston without replacing anything
We repair just the damaged spot and colour-match it to the bath, which costs far less than replacing a fitted bath and the tiles around it. Most baths can be used again the following day. Our technicians work on cast iron enamel, acrylic and whirlpool & spa baths, and people most frequently call us about chips under the taps and chips on the rim or sides.
We guarantee the work for a year. If there’s a problem with the repair within the year, we return and sort it.
- Where
- Binweston (SY5)
- Area hub
- Shropshire
- Guarantee
- 12 months on all our work
- Quote
- From £95. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
How we price bath repair
Repairs from £95. Every quote is fixed and free. What we take into account:
- Previous DIY repairs that have to come out
- Access to the area
- The type of damage
- How hard the colour is to match
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you’ll get a fixed figure.
Getting a price from photos
Phone pictures are fine, there’s no need for anything special. Make sure they show:
- The material, if you know it
- A coin or ruler next to the damage for scale
- One picture of the entire bath
- Good light, ideally daylight, without flash glare
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.
Can I fix it myself?
If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is usually cheaper.
Binweston questions
What information do you need?
Just pictures, your postcode and a contact number. On the day, we only need access to the room.
Can you redo an old repair?
Yes, we do this frequently. We strip it out, deal with any rust and repair it again.
Can you repair a chip on a coloured bath?
Yes, coloured baths are no problem. The colour is tinted by hand on the day.
Do you cover Binweston?
Yes, we do. Technicians travel to Binweston from across the region, with no extra charge for travel.
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time that suits you.
When can you do it?
We’ll give you dates with your quote. If it’s urgent, say so and we’ll do what we can.
Can you repair a crack in an acrylic bath?
Frequently, yes, as long as we can get to the back of the crack to support it. Check under the bath panel, or send us a photo.
Is a bath repair permanent?
A properly prepared repair should last a long time, and it’s guaranteed for a year. Gentle cleaning helps it last.
Binweston and the surrounding area
Binweston is about 13 miles south-west of Shrewsbury, in Shropshire. Across the SY5 area, a technician comes to you. Binweston is one of 433 towns and villages in Shropshire where we work. We work right across the region, from Binweston to Birmingham (49 miles away).
Our visits in SY5 work the same way as everywhere else we cover. If you are just outside Binweston, we cover Brockton (1 mile east), Brunant (4 miles north-west), Nelly Andrews' Green (4 miles north-west), Buttington (4 miles north-west) and Cefn (4 miles north-west). Larger places within reach include Shrewsbury (13 miles north-east), Coleham (13 miles north-east), Kingsland (13 miles north-east), Belle Vue (13 miles east), Monkmoor (14 miles north-east) and Bagley (13 miles north-east).
Near you in Binweston
Around Binweston, we work in homes near The Lowfield Inn. The nearest railway station is Welshpool station, about 4.7 miles north-west. Other landmarks nearby include Marton The Mount (1.2 miles south-west) and Victoria Memorial Hospital (5 miles north-west). For a walk, there’s Long Mountain and Llyn Coed-y-Dinas.
When we’d advise against a repair
Honesty matters more than a booking, so here’s what a repair won’t do:
- Acrylic cracks with no access behind them
- A bath that moves underfoot, until its support is fixed
- A bath worn all over, where resurfacing makes more sense
If in doubt, send pictures and we’ll say what we think before booking.
What we work on
- Pressed steel enamel
- Acrylic
- Roll-top & freestanding
- Cast iron enamel
- Whirlpool & spa baths
Common problems we fix in Binweston
Dropped items cause the majority of chips, and a lot happen during bathroom refits. Cracks in acrylic have a different cause: poor support underneath, so the bath flexes when it’s full.
Look out for any of the following:
- Chips caused by builders
- Hairline or through cracks in acrylic
- Chips along the edge of the bath
- An old repair that has yellowed or come loose
What your quote should include
- What protection goes down before work starts
- What prep work is covered
- The length of the guarantee and what it covers
- What happens if they find more damage
Landlord and trade work in Binweston
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
Builders use us to fix snagging damage before handover, so there is no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.
What we do, step by step
Expect a friendly, tidy visit. We confirm the time with you beforehand, cover and mask the work area, and get on with the job, which usually takes a morning or an afternoon. If anything looks different from your pictures, we’ll talk to you before going ahead.
- First, we check the damage against your pictures and agree the plan.
- Any rust and loose material comes out, and the area is degreased.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
Preparing for the visit
- Keep children and pets away from the room on the day
- Open a window if you can
- Let us know which floor the room is on
Ask for a price
For a price in Binweston, the easiest route is photos: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Related advice
What your bath is made of matters
Cast iron
Cast iron is heavy and rigid, with a fused enamel surface. Chips can rust if left, but the bath itself lasts for generations, so it’s always worth repairing.
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Exposed steel rusts fast, especially around the waste, so repair chips early.
Also near Binweston
Other services in Binweston
About our accreditations · Every repair comes with a one-year guarantee.
