Stockton-on-Tees · England

Non-Slip Bath Coating in Bishopsgarth

Non-slip bath coating in and around Bishopsgarth: photo quotes, tidy work and a year’s guarantee.

  • Safety for older or less mobile people
  • A bath or tray that is slippery when wet
  • Worn-out textured areas
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating in Bishopsgarth

About our non-slip bath coating in Bishopsgarth

It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. It’s popular with homes with older or less mobile people, holiday lets and families. We work on shower trays, acrylic baths and enamelled baths, and the jobs we see most are safety for older or less mobile people and resurfaced baths that are now too smooth.

The work is covered for a year after we finish. Just call us if there is a problem and we’ll come back. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.

Location
Bishopsgarth (TS19)
Region
Stockton-on-Tees
Guarantee
A year, on every repair
Quotes
Fixed and free, based on pictures
Phone
0345 017 0787
Page updated
23 October 2026
Stained shower tray resurfaced to clean white, before and after

DIY repairs versus a professional job

What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.

For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.

When to call us in Bishopsgarth

Baths and trays are made smooth so they’re easy to clean, yet with soap and water on them they become slippery. Textured areas on older baths wear smooth too.

People generally call us after spotting something like this:

  • Worn-out textured areas
  • Bath mats that harbour mould or get forgotten
  • Resurfaced baths that are now too smooth
  • Safety for older or less mobile people

Before booking anyone

  • Aftercare advice
  • If travel is included in the price
  • What happens if they find more damage
  • Whether the price is fixed and includes VAT

10 questions to ask before booking

Bishopsgarth and nearby

Bishopsgarth is about 1 mile west of Stockton-on-Tees, in Stockton-on-Tees. Across the TS19 area, we come to you. We work in all 31 towns and villages across Stockton-on-Tees. We work right across the region, from Bishopsgarth to Newcastle upon Tyne (about 31 miles away).

Our visits in TS19 are booked in the same way as anywhere else. From Leam Lane, Tyrone Road and Marske Lane or a nearby road, a technician can come to you. Nearby, we also work in Elm Tree Farm (1 mile south-east), Hardwick (1 mile north-east), Fairfield (1 mile south), Roseworth (1 mile north-east) and Stockton-on-Tees (1 mile east). Within a short drive, we also cover Billingham (4 miles north-east), Ingleby Barwick (4 miles south-east), Thornaby-on-Tees (3 miles south-east), Yarm (6 miles south), Egglescliffe (4 miles south) and Wynyard (4 miles north).

Around Bishopsgarth

We visit homes around Bishopsgarth School, Hardwick Green Primary Academy and St. Chad's Church and the streets around them. The nearest railway station is Stockton station, roughly 1.7 miles east. Further afield, we also cover the area around Green Dragon Museum (2.1 miles south-east) and Yarm Castle (4.9 miles south).

Map of Bishopsgarth © OpenStreetMap contributors

Why repair rather than replace?

The alternatives are a new textured bath or tray, or a bath mat that needs lifting and cleaning. A coating treats your existing bath or tray. The price reflects the work involved, not your postcode. The full price is agreed before booking, with nothing added on the day.

Why book with us

  • Free fixed quotes from pictures
  • We leave the room as we found it
  • Technicians who travel to you, UK-wide
  • Generally one visit, start to finish

Read our full price list.

What happens on the day

A typical visit goes like this: we arrive on time, sheet and mask the area around the job, carry out the work and clear up. Allow a few hours. Before we go, we will explain how long to leave it and how to care for it.

  1. First the standing area is cleaned and degreased.
  2. Next we mask off the area.
  3. We apply the clear textured coating.
  4. The masking comes off to leave a neat edge.
  5. The coating is left to cure before use, normally overnight.

How to prepare

  • Tell us if there are stairs or a lift
  • Open a window if you can
  • Tell us about any previous repairs or coatings

Getting a price

There is no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.

Get a free quote

Read more

When we would advise against a repair

Before you book, it’s worth knowing the limits too:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Send us pictures and we’ll tell you honestly.

Surfaces we repair

  • Wet room floors (ask us)
  • Resurfaced baths
  • Enamelled baths
  • Acrylic baths
  • Shower trays

What affects the price in Bishopsgarth

We don’t charge extra for travel to Bishopsgarth. The price comes down to:

  • Whether old repairs or coatings need taking off
  • Whether we combine several jobs
  • The material and finish
  • How hard the colour is to match

Rather than charging by the hour, we price the whole job up front. Damage, material and access decide it, and doing several items at once reduces it.

How to get a fixed price

When you take your pictures, a few simple things make all the difference:

  • Whether it’s been repaired or coated before
  • One picture of the whole bath or shower tray
  • Good light, ideally daylight, without flash glare
  • The material, if you know it

Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job without visiting.

FAQs for Bishopsgarth

Does someone need to be in?

Yes. We need access to the room while we work, at a time we agree with you.

Is a non-slip bath easy to clean?

Yes. Use a soft brush and a mild cleaner.

Do you cover Bishopsgarth?

We do. We send a technician to Bishopsgarth for every job, and the price is the same as everywhere else.

What information do you need?

Send photos through the quote form or call 0345 017 0787.

How do I get a price for non-slip bath coating in Bishopsgarth?

Because every job differs, we price from photos. You know the full cost before anything is booked.

It’s been repaired before. Can you still fix it?

Generally, yes. Let us know what was used before.

Are there extra charges for Bishopsgarth?

No. Our quotes include travel, and we charge the same wherever you are.

Is repairing better than replacing?

Generally, yes. A repair skips the removal, fitting and redecorating. If it is not worth repairing, we’ll tell you.

Landlord and trade work in Bishopsgarth

Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.

If you manage property in Bishopsgarth, we can repair and quote for several addresses together. Just send pictures for each address and we will come back with a combined price.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.