Stockton-on-Tees · England
Non-Slip Bath Coating in Roseworth
Non-slip bath coating for Roseworth, without a refit. Get a fixed price from your pictures, then book a visit.
- Worn-out textured areas
- Bath mats that harbour mould or get forgotten
- Safety for older or less mobile people
When we would advise against a repair
To be straight with you, some problems need a different fix:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Send us photos and we will tell you honestly before booking.
Surfaces we repair
- Enamelled baths
- Shower trays
- Acrylic baths
- Resurfaced baths
- Wet room floors (ask us)
How we handle non-slip bath coating in Roseworth
It’s popular with homes with older or less mobile people, holiday lets and families. It’s a clear, textured coating, so the bath looks much the same. Whether it’s a bath or tray that is slippery when wet and safety for older or less mobile people, we can typically put it right.
You are covered after we leave: each job carries a one-year guarantee, and we explain what it covers before you book. Clean with a soft brush and a mild cleaner. Don’t use abrasive pads on the textured area.
- Area
- Roseworth (TS19, TS20, TS21)
- Area hub
- Stockton-on-Tees
- Cover
- A year, on every repair
- Quotes
- Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
DIY kit or professional repair?
If you’re set on a kit, follow its instructions closely, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
Work for landlords and builders
Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Signs you need non-slip bath coating in Roseworth
Baths and trays are made smooth so they’re easy to clean, yet wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.
It’s worth getting a quote if you see:
- Resurfaced baths that are now too smooth
- Safety for older or less mobile people
- Bath mats that harbour mould or get forgotten
- A bath or tray that is slippery when wet
Questions to ask before booking
- How long it needs to cure
- If travel is included in the price
- What aftercare is recommended
- Who turns up on the day
Questions from Roseworth
What if the damage is worse than the pictures show?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
Will I see the coating?
Very little: the treated area looks slightly matt.
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Is there a guarantee?
Every repair comes with our one-year guarantee. We will explain what it covers when we quote.
Can I get a quote without a visit?
Nearly always. We only ask to see it in person if the photos cannot show what we need.
Is a non-slip bath easy to clean?
Yes. Use a soft brush and a mild cleaner.
It’s been repaired before. Can you still fix it?
Generally, yes. We remove the old repair before doing a new one, so let us know about it.
Roseworth and the surrounding area
Roseworth is about 1 mile north-west of Stockton-on-Tees, in Stockton-on-Tees. Wherever you are in the TS19 postcode area, we carry out the work at your property. Roseworth is one of 31 towns and villages in Stockton-on-Tees where we work. We work right across the region, from Roseworth to Newcastle upon Tyne (about 30 miles away).
Our visits in TS19, TS20 and TS21 work the same way as everywhere else we cover. Local streets include Ryde Road, Ketton Road and Ilford Road. We also travel to Hardwick (1 mile south-west), Bishopsgarth (1 mile south-west), Norton (1 mile east), Elm Tree Farm (1 mile south) and Stockton-on-Tees (1 mile south-east). We also work in nearby towns such as Billingham (3 miles north-east), Ingleby Barwick (5 miles south), Thornaby-on-Tees (4 miles south-east), Yarm (6 miles south), Egglescliffe (5 miles south) and Wynyard (4 miles north).
Around Roseworth
Locally, our jobs take us to homes close to Bishopsgarth School, Rosebrook Primary School and Red House School and the streets around them. Roseworth’s nearest station is Stockton station, about 1.6 miles south-east of the centre. A little further out are Green Dragon Museum (2.1 miles south-east) and University Hospital of North Tees (0.5 miles south-west).
Also near Roseworth
More services for Roseworth
What non-slip bath coating costs
We do not charge extra for travel to Roseworth. The price comes down to:
- How hard the colour is to match
- The material
- How much damage there is
- Whether we combine several jobs
Set against the cost of replacement, a repair is usually a fraction of the price, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Quotes from your pictures
The better the photos, the more accurate the price. Here’s what helps:
- Whether it’s been repaired or coated before
- One sharp close-up of the damage
- Daylight if possible, and no flash reflection
- The material, if you know it
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through.
Repair or replace in Roseworth?
Instead, you could go for a new textured bath or tray, or a bath mat that needs lifting and cleaning. A coating adds grip to the bath you have. What it costs depends on the type and amount of damage, the material and how many items we do on one visit. You get a fixed price from your photos, so there are no surprises on the day.
Why book with us
- No need to remove anything
- We leave the room as we found it
- One price list for the entire UK
- CHAS, Constructionline and SafeContractor accredited
Take a look at our prices page.
How it works
Visits start with a quick look at the job together, so you know exactly what we are doing. After that, protection goes down around the work area and the work begins. Allow a morning or an afternoon.
- We clean and degrease the standing area.
- We mask out the area to be treated.
- We put on the clear non-slip coating.
- The masking comes off to leave a neat edge.
- We leave it to cure, generally overnight.
Before we arrive
- Let us know about parking or access
- Mention if the room is upstairs or in a flat
- Keep pets and children out of the room while we work
Get a quote
You don’t need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed quote.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
