Argyll and Bute · Scotland

Non-Slip Bath Coating for Black Crofts homes

Non-slip bath coating in Black Crofts without the cost of replacing. Get a fixed quote from your photos, then we come to you.

  • Resurfaced baths that are now too smooth
  • Worn-out textured areas
  • Safety for older or less mobile people
Surface Doctor technician refinishing the outside of a roll-top bath

Need non-slip bath coating in Black Crofts?

Questions from Black Crofts

Do the materials smell?

It depends on the job, but frequently a little. Ventilation keeps it to a minimum, and it soon fades.

Will I see the coating?

Only slightly: it shows as a matt area where you stand.

Is it messy?

Very little mess: we sheet and mask everything nearby, and we leave the room clean.

Do you hold any accreditations?

Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

Is there a guarantee?

Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.

What does non-slip bath coating cost?

We give a fixed quote based on photos of the damage. Send a close-up of the damage and a wider photo and your postcode.

What information do you need?

Photos of the damage, a picture of the whole bath or shower tray and your postcode. Then we’ll agree a date.

Is a non-slip bath easy to clean?

Yes. Use a soft brush and a mild cleaner.

How we handle non-slip bath coating in Black Crofts

It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. It’s popular with homes with older or less mobile people, holiday lets and families. Whether it’s resurfaced baths that are now too smooth and bath mats that harbour mould or get forgotten, we can help, on acrylic baths, shower trays and resurfaced baths alike.

Every job is backed for twelve months in Black Crofts and everywhere else. If something goes wrong with the work, we come back. A soft brush and mild cleaner keep it clean. Don’t use abrasive pads on the textured area.

Location
Black Crofts (PA37)
Area hub
Argyll and Bute
Cover
12 months on all our work
Quote
Free, fixed quote from pictures
Call
0345 017 0787
Last updated
23 October 2026
Stained shower tray resurfaced to clean white, before and after

About Black Crofts

Black Crofts is about 40 miles north-west of Helensburgh, in Argyll and Bute. From the centre of Black Crofts to the outlying streets, the service is the same: a fixed quote, a tidy visit and a guarantee. Black Crofts is one of 118 towns and villages in Argyll and Bute where we work. You can also see our page for Glasgow, about 60 miles away.

Our visits in PA37 are booked in the same way as anywhere else. If you are just outside Black Crofts, we cover Ardchattan (1 mile north-east), North Connel (1 mile south-west), Connel (2 miles south-west), Benderloch (2 miles north-west) and Dunbeg (4 miles south-west). For island and remote addresses, ring us first and we’ll plan the trip.

Local landmarks in Black Crofts

We visit homes around Ardchattan Parish Church and the streets around them. The nearest railway station is Connel Ferry station, about 1.4 miles south-west. A little further out are Dunstaffnage Castle (3 miles west). The countryside around Black Crofts includes Lochan Dubh.

Map of Black Crofts © OpenStreetMap contributors

Repair or replace: which is better?

Instead, you could go for a new textured bath or tray, or relying on a mat that needs lifting and cleaning. A coating treats your existing bath or tray. There are no surprise extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.

Why Black Crofts clients choose us

  • Same prices wherever you are
  • Accredited with CHAS, Constructionline and SafeContractor
  • We leave the room as we found it
  • Every repair guaranteed for a year

See our pricing.

When we would advise against a repair

We’d rather lose a job than do one that will not last, so these are the limits:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Not sure? Send pictures and we will give you a straight answer.

Materials we work on in Black Crofts

  • Enamelled baths
  • Acrylic baths
  • Wet room floors (ask us)
  • Resurfaced baths
  • Shower trays

Signs you need non-slip bath coating in Black Crofts

Baths and trays are made smooth so they’re easy to clean, but with soap and water on them they become slippery. Textured areas on older baths wear smooth too.

Customers usually contact us about:

  • Worn-out textured areas
  • A bath or tray that is slippery when wet
  • Bath mats that harbour mould or get forgotten
  • Resurfaced baths that are now too smooth

Questions to ask before you book

  • Aftercare advice
  • Whether there are any call-out or travel charges
  • What preparation is included
  • Whether the colour is mixed to match

10 questions to ask before booking

What we do, step by step

From the moment we arrive, we keep the work contained to the one room. We mask off everything nearby, the job takes a few hours, depending on what we find, and we finish with a tidy-up and a look at the finished work together.

  1. We start by degreasing the area where you stand.
  2. Next we mask off the area.
  3. We put on the clear non-slip coating.
  4. We remove the masking for a neat edge.
  5. The coating is left to cure before use, generally overnight.

Before we arrive

  • Mention any parking restrictions or tricky access
  • Let the surface dry out before the visit
  • Point us to the nearest place to park

How to get a price

Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job without visiting.

Send photos for a quote

Related advice

Should I try a DIY kit first?

A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.

Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.

Work for landlords and builders

We carry out planned and one-off repairs for housing associations and facilities teams in Argyll and Bute and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.

Letting agents frequently send us photos straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.

What non-slip bath coating costs

Quotes are free and the price is fixed. What we take into account:

  • Doing more than one item at once
  • Unusual colours or finishes
  • How easy the damage is to reach
  • Whether it’s a chip, crack, burn or wear

A repair usually costs much less than people expect, especially compared with replacing and refitting. Send pictures and we will give you the exact figure.

Send pictures for a quote

You can take the pictures on your phone, there is no need for anything special. Make sure they show:

  • Good light, ideally daylight, without flash glare
  • What it’s made of, if you know
  • A wider photo showing the whole bath or shower tray
  • Details of any past repairs

Email us pictures of the damage and a wider shot of the whole item, and tell us you’re in Black Crofts, and we will reply with a fixed quote.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.