Aberdeen · Scotland
Non-slip bath & shower coating in Blackburn, Aberdeen
Non-slip bath coating across Blackburn and nearby, usually in one visit.
- Safety for older or less mobile people
- Resurfaced baths that are now too smooth
- Bath mats that harbour mould or get forgotten
Non-slip bath coating in Blackburn without replacing anything
It’s a clear, textured coating, so the bath looks much the same. It’s popular with homes with older or less mobile people, holiday lets and families. Typical jobs include resurfaced baths that are now too smooth and bath mats that harbour mould or get forgotten, in enamelled baths, acrylic baths and shower trays.
We guarantee the work for a year. If something isn’t right in that time, we come back and put it right. A soft brush and mild cleaner keep it clean. Do not use abrasive pads on the textured area.
- Location
- Blackburn (AB21)
- Area hub
- Aberdeen
- Warranty
- One year on every repair
- Price
- Free and fixed, from your photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Repairing versus replacing in Blackburn
Instead, you could go for replacing the bath or tray with a textured one, or relying on a mat that needs lifting and cleaning. A coating treats your existing bath or tray. A repair is priced on what needs doing, not where you live. You will see the full price before you book.
What you get with us
- Dust sheets down, tidy finish
- Most jobs done in one visit
- A fixed quote before booking
- Repair technicians who travel to you, UK-wide
Take a look at our pricing.
What affects the price in Blackburn
You won’t pay by the hour. The price is based on:
- Doing more than one item at once
- Whether it’s a chip, crack, burn or wear
- What the surface is made of
- Where the damage is and how we get to it
No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
Quotes from your pictures
When you take your photos, a few simple things make all the difference:
- Whether it’s been repaired or coated before
- One picture of the whole bath or shower tray
- Where you are, by postcode
- A clear, close picture of the problem area
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath or shower tray, include your postcode and send them to us. What comes back is a fixed price, not a guess.
Work for landlords and builders
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Common problems we fix in Blackburn
Baths and trays are made smooth so they’re easy to clean, but with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.
Clients normally contact us about:
- Worn-out textured areas
- Bath mats that harbour mould or get forgotten
- A bath or tray that is slippery when wet
- Resurfaced baths that are now too smooth
Before booking anyone
- Whether there are any call-out or travel charges
- How your room will be protected
- Who will actually do the work
- How to look after the finish
Towns and villages near Blackburn
What else we do in Blackburn
When a repair isn’t the answer
A few problems are outside what a surface repair can do:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Not sure? Send pictures and we will give you a straight answer before you book.
What we work on
- Enamelled baths
- Wet room floors (ask us)
- Resurfaced baths
- Acrylic baths
- Shower trays
About Blackburn
Blackburn is about 7 miles south-east of Inverurie, in Aberdeen. Wherever you are in the AB21 postcode area, we carry out the work at your property. Blackburn is one of 63 towns and villages in Aberdeen where we work.
Here we cover the AB21 postcode area. Whether you live on Marcus Road, Marcus Drive and Mitchell Gardens or anywhere nearby, we can come to you. Main roads around Blackburn include the A96 and B973, which makes travel easy. Neighbouring places we cover include Kinellar (1 mile west), Mill of Fintray (2 miles north), Hatton of Fintray (2 miles north), Kintore (3 miles north-west) and Kirkton of Skene (4 miles south-west). Further out, we also cover Aberdeen (7 miles south-east), Rosemount (8 miles south-east), Berryden (7 miles south-east), Ferryhill (8 miles south-east), New Aberdeen (8 miles south-east) and Dyce (4 miles east).
Near you in Blackburn
Typical jobs here are in homes near Blackburn and the streets around them. The closest station to Blackburn is Kintore station, about 3.4 miles north-west of the centre. A little further out are Hallforest Castle (3.4 miles north-west) and Inverurie Hospital (5.9 miles north-west). Green spaces nearby include Tyrebagger Hill and Loch of Skene.
Blackburn questions
What happens if you find more damage?
It’s rare, but if it happens we talk to you first. You decide whether to go ahead.
I’m a tenant. Can you help?
Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged before the end of a tenancy.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
How much does non-slip bath coating cost in Blackburn?
We give a fixed price from your photos. Send a close-up and a picture of the entire item and your postcode.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.
Is the work guaranteed?
All our work carries our one-year guarantee. Ask us what it covers when you get your quote.
Is it worth repairing rather than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. If it is not worth repairing, we’ll tell you.
Is it safe with children and pets around?
Yes, as long as they stay out of the room we are working in. We’ll tell you when the room can be used again.
How the visit works
It’s a tidy, low-fuss visit. We agree the arrival time in advance, cover and mask the work area, and get on with the job, which normally takes a morning or an afternoon. If we find something your pictures didn’t show, we’ll explain it before carrying on.
- We start by degreasing the area where you stand.
- Next we mask off the area.
- The clear textured coating is applied.
- We remove the masking for a neat edge.
- Once it has cured, normally overnight, it’s ready.
Getting ready for the visit
- Tell us about any previous repairs or coatings
- Mention any parking restrictions or tricky access
- Keep a parking space free if you can
Getting a price
For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.
Read more
DIY repairs versus a professional job
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is usually cheaper.
About our accreditations · Every repair comes with a one-year guarantee.
