Hampshire · England
Non-slip bath & shower coating in Blackwater, Hampshire
Clear non-slip coatings for baths and shower trays for householders, landlords and businesses in Blackwater. Free, fixed quotes from your photos.
- Safety for older or less mobile people
- A bath or tray that is slippery when wet
- Worn-out textured areas
Non-slip bath coating in Blackwater without replacing anything
It suits older people, families and holiday lets. The coating is clear and textured, so the bath looks much the same. Our technicians work on wet room floors (ask us), enamelled baths and resurfaced baths, and the jobs we see most are worn-out textured areas and bath mats that harbour mould or get forgotten.
Whatever the size of the job, you get the same one-year guarantee in Blackwater and across Hampshire. Clean with a soft brush and a mild cleaner. Do not use abrasive pads on the textured area.
- Area
- Blackwater (GU17)
- County
- Hampshire
- Cover
- 12 months on all our work
- Price
- Fixed and free, based on photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
When we would advise against a repair
We will not take on work that will not last, so here’s what a repair can’t put right:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
If in doubt, send photos and we’ll say what we think before you book.
What we work on
- Wet room floors (ask us)
- Resurfaced baths
- Acrylic baths
- Shower trays
- Enamelled baths
What else we do in Blackwater
What happens on the day
On the day, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. The job typically takes a few hours. We tidy up before we leave and let you know when you can use it again.
- We start by degreasing the area where you stand.
- Next we mask off the area.
- The clear textured coating is applied.
- We remove the masking for a neat edge.
- We leave it to cure, generally overnight.
Preparing for the visit
- Mention any earlier repairs or resurfacing
- Plan for the room to be out of bounds to pets and children
- Ensure the room can be ventilated
Get a quote
There is no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Advice
About Blackwater
Blackwater is about 1 mile south of Sandhurst, in Hampshire. We visit homes and businesses in Blackwater, so nothing has to leave your home. Our technicians cover all 683 towns and villages across Hampshire, from the larger towns to small villages. Our nearest city page is London, about 32 miles away.
All of GU17 is within our area. Streets in the area include London Road, Bell Lane and Ash Close. We also travel to Frogmore (1 mile west), Hawley (1 mile south-east), College Town (1 mile north-east), Sandhurst (1 mile north) and York Town (1 mile east). We also work in nearby towns such as Basingstoke (14 miles west), Farnborough (3 miles south), Fleet (5 miles south-west), Aldershot (6 miles south), Alton (15 miles south-west) and Tadley (15 miles west).
Near you in Blackwater
Locally, our jobs take us to homes close to Royal Military Academy Library, Sandhurst Memorial Park and Frogmore Community College and the streets around them. Nearby too are Mr Bumble pub (0.6 miles south-east), Frogmore Infant School (less than half a mile south-west) and St Barnabas Church (less than half a mile west). For rail, the closest station is Blackwater station, roughly 0.6 miles east. A little further out are Frimley Park Hospital (2.4 miles south-east) and Staff College Museum (1.9 miles east). Not far away are Horseshoe Lake and Ball Hill.
What affects the price in Blackwater
Each job gets its own fixed quote. These are the things that affect it:
- The type of damage
- Previous DIY repairs that have to come out
- How many areas need work
- Whether we combine several jobs
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send pictures and you will get a fixed figure.
Getting a price from photos
Two or three clear pictures are normally enough. It helps if you send:
- A close-up of the damage, in focus
- Your postcode, so we can check dates
- Natural light rather than flash
- Any details about the material
For a price in Blackwater, the easiest route is photos: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Do you need non-slip bath coating in Blackwater?
Baths and trays are made smooth so they’re easy to clean, yet wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.
Most people get in touch after spotting one of these:
- Resurfaced baths that are now too smooth
- Bath mats that harbour mould or get forgotten
- A bath or tray that is slippery when wet
- Worn-out textured areas
What to look for in a quote
- When it can be used again
- Whether a trained technician does the job
- What prep work is covered
- How to look after the finish
Landlord and trade work in Blackwater
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We will fit around changeovers where we can.
Should I try a DIY kit first?
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
Repair or replace: which is better?
The alternatives are replacing the bath or tray with a textured one, or relying on a mat that needs lifting and cleaning. A coating adds grip to the bath you have. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.
Why book with us
- No need to remove anything
- A year’s guarantee on all work
- A fixed quote before you book
- Usually one visit, start to finish
Read our full price list.
FAQs for Blackwater
Will I see the coating?
Very little: the treated area looks slightly matt.
What if the damage is worse than the pictures show?
We stop, show you and agree any change before carrying on. You will not be charged for anything you haven’t agreed.
Will there be a smell?
It depends on the job, but often a little. Open windows and an extractor fan help, and it soon fades.
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
I rent my home. Can I book you?
We are happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.
Is the work guaranteed?
Every repair comes with a one-year guarantee. We will explain what it covers when we quote.
How quickly can you book me in?
Your quote comes with available dates. Tell us if you need it done quickly.
What information do you need?
A close-up, a wider photo and your postcode. Then we will agree a date.
About our accreditations · Every repair comes with a one-year guarantee.
