Lancashire · England
Non-Slip Bath Coating for Bolton-le-Sands homes
We travel to Bolton-le-Sands for clear non-slip coatings for baths and shower trays. Nothing is taken out, and the work is guaranteed.
- Safety for older or less mobile people
- A bath or tray that is slippery when wet
- Worn-out textured areas
What non-slip bath coating costs
There’s no charge for travel to Bolton-le-Sands. The price depends on:
- Whether it’s a chip, crack, burn or wear
- The material and finish
- How hard the colour is to match
- The size and number of damaged areas
We don’t add extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
Quotes from your pictures
Most quotes are done from photos alone. To make it quick:
- A coin or ruler next to the damage for scale
- Any earlier repairs or coatings
- A photo taken from further back
- Any details about the material
The quickest way to a price is to send a couple of pictures using our quote form or call us. We’ll tell you honestly whether it can be repaired.
Non-slip bath coating in Bolton-le-Sands without replacing anything
The coating is clear and textured, so it shows only as a slightly matt area where you stand. It suits homes with older or less mobile people, holiday lets and families. If you’re dealing with safety for older or less mobile people and a bath or tray that is slippery when wet, we can help.
All our work comes with our one-year guarantee, wherever you are in Lancashire. A soft brush and mild cleaner keep it clean. Avoid scourers on the coating.
- Area
- Bolton-le-Sands (LA5)
- County
- Lancashire
- Warranty
- A year, on every repair
- Quote
- Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
DIY repairs versus a professional job
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it won’t stop us repairing it. Just mention it when you send pictures, as it can add time.
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and do not use it until it has fully cured. If it fails, we can still put it right.
Questions from Bolton-le-Sands
Will a non-slip coating change how my bath looks?
Very little: it shows as a matt area where you stand.
How do I get a price for non-slip bath coating in Bolton-le-Sands?
Because every job differs, we price from pictures. You’ll get a fixed figure before you book.
Will the price change on the day?
If we find something the photos didn’t show, we explain it first. The price only changes if you agree.
When can you do it?
That depends on our diary for your area. Send pictures with your postcode and we will reply with the earliest dates.
Can pets and children be at home?
On the day, the room should be kept clear of pets and children, so the repair is not disturbed while it cures.
Do you do work for letting agents?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses in Bolton-le-Sands.
How do I clean it?
Yes. Use a soft brush and a mild cleaner.
Are there extra charges for Bolton-le-Sands?
Travel is included in the price, with the same prices everywhere we work.
Landlord and trade work in Bolton-le-Sands
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
We regularly work with letting and managing agents. Send the address, pictures and access details and we’ll handle the rest.
When we’d advise against a repair
A few problems are outside what a surface repair can do:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
If in doubt, send pictures and we will say what we think before booking.
Materials we repair
- Wet room floors (ask us)
- Resurfaced baths
- Acrylic baths
- Enamelled baths
- Shower trays
How the visit works
Your technician turns up at the time we agreed with you and checks the damage against your pictures first. The floor and nearby surfaces are covered before any work starts. Most visits take a morning or an afternoon, and we leave the room as we found it.
- We start by degreasing the area where you stand.
- The area to be treated is masked out.
- We put on the clear non-slip coating.
- We remove the masking for a neat edge.
- We leave it to cure, typically overnight.
Preparing for the visit
- Mention any earlier repairs or resurfacing
- Move bottles, mats and clutter away from the area
- Tell us if there are stairs or a lift
How to get a price
For a price in Bolton-le-Sands, the easiest route is photos: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.
Related advice
Do you need non-slip bath coating in Bolton-le-Sands?
Smooth surfaces are easy to clean, yet wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.
Look out for these signs:
- Bath mats that harbour mould or get forgotten
- A bath or tray that is slippery when wet
- Worn-out textured areas
- Safety for older or less mobile people
Comparing quotes
- How your room will be protected
- Whether the price covers travel
- What prep work is covered
- Is the price fixed, and does it include VAT?
Nearby places to Bolton-le-Sands
Other services in Bolton-le-Sands
Our work in Bolton-le-Sands
Bolton-le-Sands is about 4 miles north-east of Morecambe, in Lancashire. Clients in Bolton-le-Sands get the same service as everywhere else we cover: a fixed price from your photos, and a technician at your door on the day. We work in all 482 towns and villages in Lancashire. We work right across the region, from Bolton-le-Sands to Manchester (about 49 miles away).
Our repair technicians cover all of LA5. We regularly work on streets such as Monkswell Avenue, St Michael's Crescent and Monkswell Drive. If you are just outside Bolton-le-Sands, we cover Cragbank (1 mile north-east), Nether Kellet (1 mile east), Carnforth (2 miles north-east), Over Kellet (3 miles north-east) and Warton (3 miles north). Further out, we also cover Lancaster (4 miles south), Morecambe (4 miles south-west), Heysham (6 miles south-west), Garstang (14 miles south), Westfield War Memorial Village (4 miles south) and Sandylands (5 miles south-west).
Near you in Bolton-le-Sands
Typical jobs here are in homes near Carnforth High School, Church of St Mary and Blue Anchor Hotel and the streets around them. For rail, the closest station is Carnforth station, roughly 1.9 miles north-east of the centre. A little further out are Queen Victoria Hospital (3.5 miles south-west) and Lancaster Police Museum (3.9 miles south). For a walk, there is Leighton Moss RSPB reserve and Warton Crag.
Repair or replace in Bolton-le-Sands?
Instead, you could go for a new textured bath or tray, or relying on a mat, which traps water and needs cleaning. A non-slip coating adds grip to the bath you have. Instead of hourly rates, we price the whole job up front. It depends on the damage, the material and access, and doing several items at once reduces it.
Why choose Surface Doctor in Bolton-le-Sands
- Repair technicians who travel to you, UK-wide
- No need to remove anything
- We will tell you if it’s not worth repairing
- Usually one visit, start to finish
See our pricing.
About our accreditations · Every repair comes with a one-year guarantee.
