Kent · England
Non-Slip Bath Coating in Brabourne
We travel to Brabourne for clear non-slip coatings for baths and shower trays. Nothing is taken out, and the work is guaranteed.
- A bath or tray that is slippery when wet
- Safety for older or less mobile people
- Bath mats that harbour mould or get forgotten
Where we work around Brabourne
Brabourne is about 6 miles east of Ashford, in Kent. Jobs in Brabourne are booked in like any other job: a fixed quote from photos, then a visit to do the work. Brabourne is one of 922 towns and villages in Kent we cover. We work right across the region, from Brabourne to London (53 miles away).
Jobs in TN25 work the same way as everywhere else we cover. Jobs here include addresses on The Street and Canterbury Road. If you’re just outside Brabourne, we cover Bircholt Forstal (1 mile west), Brabourne Lees (1 mile south-west), Lilyvale (1 mile south-west), Smeeth (2 miles south-west) and Ridgeway (2 miles south-west). We also work in nearby towns such as Ashford (6 miles west), Canterbury (11 miles north), Dover (13 miles east), Folkestone (8 miles south-east), Whitstable (15 miles north) and Faversham (13 miles north).
Around Brabourne
Locally, our jobs take us to homes close to Brabourne Church of England Primary School, Church of St Mary and The Five Bells pub. The closest station to Brabourne is Westenhanger station, roughly 3.4 miles south-east. Nearby you will also find William Harvey Hospital (3.6 miles west) and Lympne Castle (4.6 miles south). For a walk, there is Tolsford Hill and Hatch Park.
Non-slip bath coating in Brabourne, done in place
It’s popular with homes with older or less mobile people, holiday lets and families. It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. We work on enamelled baths, shower trays and resurfaced baths, and the jobs we see most are bath mats that harbour mould or get forgotten and worn-out textured areas.
We stand behind the work with a one-year guarantee. A soft brush and mild cleaner keep it clean. Do not use abrasive pads on the textured area.
- Area
- Brabourne (TN25)
- Area hub
- Kent
- Guarantee
- 12 months on all our work
- Price
- Free, fixed price from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
What we cannot put right
Some problems need a builder, plumber or fitter rather than us:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Send us photos and we’ll tell you honestly.
What we work on
- Enamelled baths
- Wet room floors (ask us)
- Resurfaced baths
- Shower trays
- Acrylic baths
Repair or replace: which is better?
Instead, you could go for a new textured bath or tray, or relying on a mat, which traps water and needs cleaning. A non-slip coating adds grip to the bath you have. The price depends on the type and amount of damage, the material and how many items we do on one visit. You get a fixed price from your photos, so you know the cost before booking.
Why us?
- Accredited with CHAS, Constructionline and SafeContractor
- Repair technicians who travel to you, UK-wide
- One-year guarantee on every repair
- Honest advice, even when it means no job
Read our prices page.
Landlords, agents and businesses in Brabourne
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
We regularly work with letting and managing agents. Just send photos, the address and how to get access and we will handle the rest.
Places near Brabourne
Other services in Brabourne
What happens on the day
Expect a friendly, tidy visit. We confirm the time with you beforehand, cover and mask the work area, and get on with the job, which normally takes a few hours. If anything looks different from your photos, we’ll talk to you before going ahead.
- We clean and degrease the standing area.
- Next we mask off the area.
- We apply the clear textured coating.
- The masking comes off to leave a neat edge.
- The coating is left to cure before use, normally overnight.
Getting ready for the visit
- Point us to the nearest place to park
- Let us know which floor the room is on
- Move bottles, mats and clutter away from the area
Get a quote
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and you will get a fixed figure back.
Advice
FAQs for Brabourne
Can you price it without visiting?
Typically, yes. A close-up and a wider photo are enough to give a fixed quote.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Do you work for landlords and businesses?
Yes, often. We can quote for several properties together and work between tenancies.
Is a repair better than a new one?
Typically, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.
Is a non-slip bath easy to clean?
Yes. A soft brush and mild cleaner is all it needs.
How much does non-slip bath coating cost in Brabourne?
We give a fixed quote based on photos of the damage. Send a close-up of the damage and a wider photo and your postcode.
Will a non-slip coating change how my bath looks?
Very little: the treated area looks slightly matt.
What information do you need?
Some pictures, your postcode and how to reach you. On the day, access to the room.
Should I try a DIY kit first?
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it doesn’t stop a professional repair. Just mention it when you send photos, as it can add time.
Common problems we fix in Brabourne
Baths and trays are made smooth so they’re easy to clean, but wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.
You may need us if you’ve spotted:
- Safety for older or less mobile people
- Resurfaced baths that are now too smooth
- Worn-out textured areas
- A bath or tray that is slippery when wet
What to look for in a quote
- Who turns up on the day
- If travel is included in the price
- What happens if they find more damage
- What preparation is included
What affects the price in Brabourne
A fixed quote means you know the cost before you book. We look at:
- How hard the colour is to match
- How many items we do on one visit
- How many areas need work
- How easy the damage is to reach
Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access, and combining items on one visit brings it down.
Getting a price from pictures
You can generally get a fixed price without us visiting. To help us price it:
- A coin beside the damage so we can judge size
- Whether it’s been repaired or coated before
- One picture of the entire bath or shower tray
- A close-up of the damage, in focus
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the whole bath or shower tray, we can give you a fixed price.
About our accreditations · Every repair comes with a one-year guarantee.
