Derbyshire · England

Non-slip bath & shower coating in Bradbourne, Derbyshire

Non-slip bath coating in Bradbourne without the cost of replacing. Get a fixed price from your pictures, then book a visit.

  • Bath mats that harbour mould or get forgotten
  • Worn-out textured areas
  • A bath or tray that is slippery when wet
Surface Doctor technician refinishing the outside of a roll-top bath

Need non-slip bath coating in Bradbourne?

About our non-slip bath coating in Bradbourne

It’s popular with homes with older or less mobile people, holiday lets and families. It’s a clear, textured coating, so the bath looks much the same. Our technicians work on wet room floors (ask us), enamelled baths and shower trays, and common reasons people get in touch are worn-out textured areas and bath mats that harbour mould or get forgotten.

The work is guaranteed for twelve months. If something isn’t right in that time, we come back and put it right. A soft brush and mild cleaner keep it clean. Avoid scourers on the coating.

Location
Bradbourne (DE6)
Area hub
Derbyshire
Cover
A year, on every repair
Quotes
Free and fixed, from your pictures
Call
0345 017 0787
Page updated
23 October 2026
Stained shower tray resurfaced to clean white, before and after

What we do, step by step

A typical visit goes like this: we arrive on time, protect everything around the work area, do the job and tidy away. Plan for a few hours. Before leaving, we tell you how long to leave it and how to look after it.

  1. We clean and degrease the standing area.
  2. We mask out the area to be treated.
  3. The clear textured coating is applied.
  4. The masking comes off to leave a neat edge.
  5. Once it has cured, normally overnight, it’s ready.

Preparing for the visit

  • Keep a parking space free if you can
  • Plan for the room to be out of bounds to pets and children
  • Move bottles, mats and clutter away from the area

Ask for a price

Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job the same day in most cases.

Send pictures for a quote

Read more

Common problems we fix in Bradbourne

Baths and trays are made smooth so they’re easy to clean, yet with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.

Keep an eye out for any of the following:

  • Worn-out textured areas
  • Bath mats that harbour mould or get forgotten
  • Resurfaced baths that are now too smooth
  • A bath or tray that is slippery when wet

What to look for in a quote

  • Who will actually do the work
  • What the guarantee covers, and for how long
  • If travel is included in the price
  • A fixed price, and whether VAT is included

Choosing a repair company

How we price non-slip bath coating

We charge the same across the UK, including Bradbourne. The price reflects:

  • What kind of damage it is
  • How many areas need work
  • The material
  • Any earlier repairs that need removing first

Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.

Quotes from your photos

A couple of clear pictures is all it takes. It helps if you send:

  • A coin or ruler next to the damage for scale
  • Where you are, by postcode
  • Good light, ideally daylight, without flash glare
  • Whether it’s been repaired or coated before

To get a price, send a couple of pictures using our quote form or ring us. We’ll say straight away whether it can be repaired.

About Bradbourne

Bradbourne is about 9 miles west of Belper, in Derbyshire. Across the DE6 area, a technician comes to you. Bradbourne is one of 532 towns and villages in Derbyshire we cover. Our jobs stretch from Bradbourne to Manchester (about 36 miles away).

We work across DE6 and the streets around it. We also cover the places around Bradbourne: Kniveton (1 mile south), Brassington (2 miles north-east), Hognaston (2 miles south-east), Carsington (3 miles east) and Atlow (3 miles south-east). We also work in nearby towns such as Belper (9 miles east), Heanor (14 miles east), Ripley (12 miles east), Langley Mill (15 miles east), Matlock (8 miles north-east) and Clay Cross (13 miles north-east).

What’s near Bradbourne

Our clients here include homes close to All Saints' Church. Other landmarks nearby include St Oswalds Hospital (4.5 miles south-west). Not far away are Harboro' Rocks.

Map of Bradbourne © OpenStreetMap contributors

Questions from Bradbourne

Do you work for landlords and businesses?

Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses in Bradbourne.

Will a non-slip coating change how my bath looks?

Only slightly: it shows as a matt area where you stand.

Can you redo someone else’s repair?

Yes, we often do. Removing the old work can add time, and that’s in the quote.

Do you work in Bradbourne?

Yes. We work across the UK and travel to Bradbourne. Send pictures and we will quote, or call 0345 017 0787.

How do I clean it?

Yes. Use a soft brush and a mild cleaner.

How do I book?

A close-up, a wider photo and your postcode. Then we will agree a date.

Do you cover the entire of Derbyshire?

All of Derbyshire, and the rest of the UK. Travel is included in the price.

Can you repair several things at once?

Of course, and it normally saves money. Just add the extra items to your photos and we’ll quote them together.

Honest limits

A repair isn’t always the answer, and we’ll tell you before we start. We can’t fix:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

If in doubt, send photos and we will say what we think before booking.

Materials we work on in Bradbourne

  • Wet room floors (ask us)
  • Shower trays
  • Enamelled baths
  • Acrylic baths
  • Resurfaced baths

Landlords, agents and businesses in Bradbourne

Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.

We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.

Should I try a DIY kit first?

The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.

A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.

Repairing versus replacing in Bradbourne

Instead, you could go for replacing the bath or tray with a textured one, or a bath mat, which traps water and needs cleaning. A non-slip coating adds grip to the bath you have. The price depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. You get a fixed quote from your pictures, so you know the cost before booking.

Why us?

  • A fixed quote before you book
  • Honest advice, even when it means no job
  • Work done at your home or business
  • Nothing taken out or refitted

See our pricing.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.