Kent · England

Non-slip bath & shower coating in Breach, Kent

We travel to Breach for clear non-slip coatings for baths and shower trays. Everything is done in place, with a one-year guarantee.

  • Resurfaced baths that are now too smooth
  • Bath mats that harbour mould or get forgotten
  • Safety for older or less mobile people
Surface Doctor technician refinishing the outside of a roll-top bath

Need non-slip bath coating in Breach?

Non-slip bath coating at your home in Breach

It suits older people, families and holiday lets. The coating is clear and textured, so it shows only as a slightly matt area where you stand. We regularly repair enamelled baths, wet room floors (ask us) and shower trays, and common reasons people get in touch are resurfaced baths that are now too smooth and safety for older or less mobile people.

The work is covered for a year after we finish. Just call us if there’s a problem and we will sort it. Clean with a soft brush and a mild cleaner. Do not use abrasive pads on the textured area.

Stained shower tray resurfaced to clean white, before and after
Location
Breach (ME9)
County
Kent
Cover
A year, on every repair
Quote
Fixed and free, based on photos
Telephone
0345 017 0787
Page updated
23 October 2026

What a repair cannot fix

It helps to know what we cannot do:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Send us photos and we’ll tell you honestly before booking.

Materials we repair

  • Wet room floors (ask us)
  • Resurfaced baths
  • Acrylic baths
  • Enamelled baths
  • Shower trays

DIY kit or professional repair?

If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it does not work out, we can still repair it properly.

DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.

Our work in Breach

Breach is about 3 miles east of Gillingham, in Kent. Wherever you are in the ME9 postcode area, we carry out the work at your property. We cover 922 places across Kent. Our jobs stretch from Breach to London (34 miles away).

Here we cover the ME9 postcode area. Neighbouring places we cover include Newington (1 mile south-east), Lower Hartlip (1 mile south-west), Lower Halstow (1 mile north-east), Upchurch (1 mile north) and Moor Street (1 mile west). Further out, we also cover Maidstone (9 miles south-west), Sittingbourne (4 miles east), Gravesend (13 miles west), Faversham (11 miles east), Northfleet (14 miles west) and Minster (8 miles north-east).

Near you in Breach

Our customers here include homes close to Church of St Mary, The Wheatsheaf pub and Leigh Academy Rainham, among other places. Nearby too are Newington Church of England Primary School (0.7 miles south-east) and Berengrave Chalk Pit (1.9 miles north-west). The nearest railway station is Newington station, roughly 0.8 miles south-east. A little further out are Court Hall Museum (3.5 miles east) and Medway Maritime Hospital (5 miles west). The countryside around Breach includes Bishop Saltings.

Map of Breach © OpenStreetMap contributors

When to call us in Breach

Baths and trays are made smooth so they’re easy to clean, yet wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.

People typically call us when they notice one of these:

  • A bath or tray that is slippery when wet
  • Worn-out textured areas
  • Resurfaced baths that are now too smooth
  • Bath mats that harbour mould or get forgotten

Before booking anyone

  • How the room is protected while they work
  • How long the guarantee is and what it covers
  • Whether the price covers travel
  • A fixed price, and whether VAT is included

Choosing a repair company

What happens on the day

We begin by going over the job with you, so you know exactly what we are doing. Then the area is sheeted and masked and we start. You can expect it to take a few hours.

  1. We start by degreasing the area where you stand.
  2. The area to be treated is masked out.
  3. The clear textured coating is applied.
  4. We remove the masking for a neat edge.
  5. We leave it to cure, generally overnight.

Getting ready for the visit

  • Avoid using the area for a few hours before we arrive
  • Tell us if there are stairs or a lift
  • Have somewhere for us to park nearby if possible

Get a quote

If you’re in Breach and want a price, the easiest route is pictures: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.

Get a fixed price

Advice

How we price non-slip bath coating

We do not charge extra for travel to Breach. The price depends on:

  • The material
  • The type of damage
  • The colour and finish to match
  • Access to the area

A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you’ll get a fixed figure.

Send photos for a quote

Most quotes are done from photos alone. To make it quick:

  • Any details about the material
  • One sharp close-up of the damage
  • The postcode, so we can plan the visit
  • Natural light rather than flash

Most clients in Breach get their price from pictures. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.

Your questions about non-slip bath coating in Breach

Do you hold any accreditations?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

Can you price it without visiting?

Usually, yes. A close-up and a wider photo are enough to give a fixed quote.

Will I see the coating?

Only slightly: it shows as a matt area where you stand.

How do I clean it?

Yes. A soft brush and mild cleaner is all it needs.

Can I add another job to the visit?

Yes. Doing several items on one visit usually costs less than separate visits. Include pictures of each item.

Can landlords book you?

Yes, often. We can quote for several properties together and work between tenancies.

Can pets and children be at home?

Please keep children and pets out of the room during the visit. The rest of the house is unaffected.

Do you charge for travel?

Travel is included in the price, and we charge the same wherever you are.

Landlords, agents and businesses in Breach

We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which matters when someone is living in the home.

We work for landlords, letting agents and housing providers in Breach as well as householders. A repair between tenants keeps the property empty for less time, and it typically costs far less than a refit.

Repair or replace: which is better?

The alternatives are a new textured bath or tray, or a bath mat that needs lifting and cleaning. A coating adds grip to the bath you have. We don’t add extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.

What you get with us

  • Normally one visit, start to finish
  • No need to remove anything
  • CHAS and Constructionline accredited
  • No extra charge for your area

Read our pricing.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.