Gloucestershire · England
Non-Slip Bath Coating in Bream
Clear non-slip coatings for baths and shower trays for homes and businesses in Bream and across Gloucestershire. Free, fixed quotes from your pictures.
- A bath or tray that is slippery when wet
- Safety for older or less mobile people
- Bath mats that harbour mould or get forgotten
DIY kit or professional repair?
If you’re set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and give it the full curing time. If it does not work out, we can still repair it properly.
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.
How we handle non-slip bath coating in Bream
It suits homes with older or less mobile people, holiday lets and families. The coating is clear and textured, so it shows only as a slightly matt area where you stand. Common call-outs are for a bath or tray that is slippery when wet and resurfaced baths that are now too smooth, on resurfaced baths, acrylic baths and enamelled baths.
You’re covered after we leave: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.
- Location
- Bream (GL15)
- County
- Gloucestershire
- Warranty
- 12 months on all our work
- Quotes
- Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Signs you need non-slip bath coating in Bream
Baths and trays are made smooth so they’re easy to clean, but wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.
Keep an eye out for these signs:
- Resurfaced baths that are now too smooth
- Bath mats that harbour mould or get forgotten
- Worn-out textured areas
- Safety for older or less mobile people
What your quote should include
- How long it needs to cure
- What the guarantee covers, and for how long
- How the colour is matched
- How your room will be protected
Honest limits
A few problems are outside what a surface repair can do:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
If in doubt, send photos and we will say what we think before you book.
What we work on
- Shower trays
- Resurfaced baths
- Enamelled baths
- Wet room floors (ask us)
- Acrylic baths
Towns and villages near Bream
What else we do in Bream
FAQs for Bream
Do you cover the entire of Gloucestershire?
Everywhere in the UK, Bream included. There is no extra charge for travel.
Will you leave a mess?
Dust sheets and masking go down before we start, and we clean up when we have finished.
Is a non-slip bath easy to clean?
Yes. A soft brush and mild cleaner is all it needs.
Can you repair several things at once?
Yes, and it’s frequently cheaper. Send pictures of everything together and we will quote them together.
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
I rent my home. Can I book you?
Yes, though it’s best to check with your landlord first. Landlords are often glad to have it sorted before the end of a tenancy.
How much does non-slip bath coating cost in Bream?
The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.
Can you repair something that is been repaired before?
Most of the time. Tell us what was done before.
Bream and nearby
Bream is about 9 miles north-east of Chepstow, in Gloucestershire. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Our technicians cover all 470 towns and villages across Gloucestershire. We work right across the region, from Bream to Birmingham (57 miles away).
Our visits in GL15 work the same way as everywhere else we cover. Local streets include High Street, Lansdown Walk and Blue Rock Crescent, all of which we cover. Nearby, we also work in Brockhollands (1 mile south-east), Whitecroft (1 mile east), Pillowell (1 mile east), Parkend (2 miles north) and Ellwood (2 miles north-west). We also work in nearby towns such as Stroud (15 miles east), Quedgeley (13 miles east), Lydney (3 miles south-east), Kingsway Village (14 miles east), Cam (10 miles south-east) and Stonehouse (12 miles east).
Local landmarks in Bream
Typical jobs here are in homes near Bream Church of England Primary School, St James and Nagshead. The nearest railway station is Lydney station, roughly 3.2 miles south-east of the centre. Other landmarks nearby include Cinderbury Iron Age Experience (2.2 miles north-west) and Little Camp Hill (2.3 miles south). For a walk, there is Foxes Bridge Bog.
What happens on the day
We begin by going over the job with you, so you know exactly what we are doing. Next, we cover and mask everything nearby and we start. You can expect it to take a few hours.
- First the standing area is cleaned and degreased.
- The area to be treated is masked out.
- We apply the clear textured coating.
- We lift the masking for a clean edge.
- Once it has cured, normally overnight, it’s ready.
Preparing for the visit
- Let us know about parking or access
- Have somewhere for us to park nearby if possible
- Tell us if there are stairs or a lift
How to get a price
Upload pictures of the damage and one of the whole item, with your GL15 postcode, and we’ll reply with a fixed quote.
Read more
Repair or replace in Bream?
Instead, you could go for replacing the bath or tray with a textured one, or relying on a mat that needs lifting and cleaning. A coating treats your existing bath or tray. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.
Why book with us
- Honest advice, even when it means no job
- No extra charge for your area
- Nothing taken out or refitted
- One visit for most repairs
Read our prices page.
Landlord and trade work in Bream
For anyone letting property in or around Bream, we’ll quote for several properties at once. Just send pictures for each address and we will come back with a combined price.
Letting agents frequently send us pictures straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
How we price non-slip bath coating
Prices are worked out job by job, from your pictures. The main factors are:
- Whether it’s a chip, crack, burn or wear
- What the surface is made of
- Any earlier repairs that need removing first
- The size and number of damaged areas
No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
How to get a fixed price
You can generally get a fixed price without us visiting. To help us price it:
- A clear, close picture of the problem area
- A picture taken from further back
- Good light, ideally daylight, without flash glare
- The postcode, so we can plan the visit
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath or shower tray, include your postcode and send them over. What comes back is a fixed price, not a guess.
About our accreditations · Every repair comes with a one-year guarantee.
