Gloucestershire · England

Non-Slip Bath Coating for Cam homes

Local non-slip bath coating for Cam: photo quotes, tidy work and a year’s guarantee.

  • Worn-out textured areas
  • Resurfaced baths that are now too smooth
  • A bath or tray that is slippery when wet
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating in Cam

When a repair isn’t the answer

We’ll always be straight with you, so here’s what a repair won’t do:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

If in doubt, send pictures and we will say what we think before booking.

Surfaces we repair

  • Shower trays
  • Wet room floors (ask us)
  • Acrylic baths
  • Resurfaced baths
  • Enamelled baths

Non-slip bath coating at your home in Cam

It’s popular with older people, families and holiday lets. The coating is clear and textured, so it shows only as a slightly matt area where you stand. If you’re dealing with resurfaced baths that are now too smooth and safety for older or less mobile people, we can help, on enamelled baths, wet room floors (ask us) and shower trays alike.

The work is covered for a year after we finish. If anything isn’t right, ring us and we’ll sort it. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.

Before and after: an old shower tray refinished by Surface Doctor
Area
Cam (GL11)
Region
Gloucestershire
Warranty
A year, on every repair
Quotes
Fixed and free, based on photos
Telephone
0345 017 0787
Updated
23 October 2026

How it works

We begin by going over the job with you. Next, we cover and mask everything nearby and the work begins. You can expect it to take a morning or an afternoon, and we’ll tell you if anything changes.

  1. We start by degreasing the area where you stand.
  2. We mask out the area to be treated.
  3. We apply the clear textured coating.
  4. The masking comes off to leave a neat edge.
  5. The coating is left to cure before use, normally overnight.

Preparing for the visit

  • Mention any earlier repairs or resurfacing
  • Let us know about parking or access
  • Tell us if there are stairs or a lift

Ask for a price

You do not need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will reply with a fixed quote.

Get a fixed price

Read more

Why repair rather than replace?

Instead, you could go for replacing the bath or tray with a textured one, or relying on a mat, which traps water and needs cleaning. A coating adds grip to the bath you have. What it costs depends on how much damage there is and what kind, the material and how many items we do on one visit. We give a fixed price from your photos, so there are no surprises on the day.

What you get with us

  • We leave the room as we found it
  • Work done at your home or business
  • No need to remove anything
  • One-year guarantee on every repair

Read our full price list.

Cam: your questions answered

What do you need from me?

A close-up, a wider photo and your postcode. Then we’ll agree a date.

Is it safe with children and pets around?

Yes, as long as they stay out of the room we’re working in. We will tell you when the room can be used again.

Can you do more than one item on the same visit?

Yes, and it’s often cheaper. Send pictures of everything together and you will get one combined price.

Will there be a smell?

A little, depending on the job. Open windows and an extractor fan help, and it soon fades.

Is it worth repairing rather than replacing?

Generally, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.

Do I need to be at home?

Yes. We need access to the room while we work, at a time that suits you.

How do I clean it?

Yes. A soft brush and mild cleaner is all it needs.

Is there a call-out fee?

Travel is included in the price, with the same prices everywhere we work.

Cam and the surrounding area

Cam is about 7 miles south-west of Stroud, in Gloucestershire. Across the GL11 area, a technician comes to you. We cover all 470 towns and villages in Gloucestershire. You can also see our page for Birmingham, about 57 miles away.

Jobs in GL11 are booked in the same way as anywhere else. Jobs here include addresses on Station Road, High Street and Church Road and the roads around them. Cam sits on or near the B4066, so getting to you is simple. If you are just outside Cam, we cover Farfield (1 mile south-east), Ashmead Green (1 mile east), Dursley (1 mile south-east), Woodmancote (2 miles south-east) and Rockstowes (2 miles south-east). Within a short drive, we also cover Gloucester (12 miles north-east), Stroud (7 miles north-east), Brockworth (13 miles north-east), Quedgeley (9 miles north-east), Lydney (7 miles west) and Innsworth (15 miles north-east).

Around Cam

Typical jobs here are in homes near Church of St Bartholomew, Cam Woodfield Junior School and Rednock School and the streets around them. The closest station to Cam is Cam & Dursley station, roughly 1.4 miles north. Other landmarks nearby include Vale Community Hospital (0.8 miles south-east) and Drakestone Camp (1.4 miles south-west). The countryside around Cam includes Coaley Peak and WWT Slimbridge.

Map of Cam © OpenStreetMap contributors

What we’re called out for in Cam

Smooth surfaces are easy to clean, but wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.

Most people contact us when they notice one of these:

  • Bath mats that harbour mould or get forgotten
  • Safety for older or less mobile people
  • A bath or tray that is slippery when wet
  • Resurfaced baths that are now too smooth

Comparing quotes

  • Whether a trained technician does the job
  • What preparation is included
  • How the colour is matched
  • How soon you can use it again

Choosing a repair company

Can I fix it myself?

It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.

You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.

Prices and what affects them

We charge the same across the UK, including Cam. What changes the price is:

  • The type of damage
  • What the surface is made of
  • How many areas need work
  • Any earlier repairs that need removing first

Our prices are the same across the UK, so there is no premium for Cam. The job itself decides the price: the material, the amount of damage and how many items.

Quotes from your photos

Two or three clear pictures are usually enough. It helps if you send:

  • Daylight if possible, and no flash reflection
  • What it’s made of, if you know
  • Something in shot to show the size
  • Whether it’s been repaired or coated before

Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed quote without visiting.

Work for landlords and builders

Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We are CHAS, Constructionline and SafeContractor accredited.

We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.