Somerset · England

Non-Slip Bath Coating for Brean homes

Clear non-slip coatings for baths and shower trays in Brean, carried out at your home and guaranteed for a year.

  • Safety for older or less mobile people
  • A bath or tray that is slippery when wet
  • Resurfaced baths that are now too smooth
Surface Doctor technician refinishing the outside of a roll-top bath

Need non-slip bath coating in Brean?

How we handle non-slip bath coating in Brean

It’s popular with homes with older or less mobile people, holiday lets and families. It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. Common call-outs are for safety for older or less mobile people and worn-out textured areas, across shower trays, enamelled baths and acrylic baths.

Big or small, you get the same one-year guarantee in Brean and across Somerset. A soft brush and mild cleaner keep it clean. Avoid scourers on the coating.

Before and after: an old shower tray refinished by Surface Doctor
Area
Brean (TA8)
Region
Somerset
Warranty
12 months on all our work
Price
Free and fixed, from your photos
Phone
0345 017 0787
Page updated
23 October 2026

About Brean

Brean is about 4 miles north of Burnham-on-Sea, in Somerset. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Brean is one of 640 places in Somerset where we work.

Every address in TA8 is within our area. From Pinewood Way, South Road and Hill View or a nearby road, a technician can come to you. If you are just outside Brean, we cover Berrow (2 miles south), Batch (2 miles east), Purn (2 miles north-east), Uphill (3 miles north-east) and Lympsham (3 miles east). Larger places within reach include Bridgwater (11 miles south), Burnham-on-Sea (4 miles south), Cheddar (10 miles east), Sydenham (12 miles south), Highbridge (5 miles south) and North Petherton (14 miles south).

Local landmarks in Brean

We visit homes around Seagull Inn and Church of St Bridget and the streets around them. The nearest railway station is Weston-Super-Mare station, roughly 3.9 miles north-east of the centre. Nearby you will also find Yielding Tree Railway Museum (2.4 miles north-east) and Weston General Hospital (2.6 miles north-east). Open spaces near Brean include Brean Down.

Map of Brean © OpenStreetMap contributors

DIY kit or professional repair?

A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.

DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.

Honest limits

Before you book, it’s worth knowing the limits too:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Not sure? Send pictures and we’ll give you a straight answer.

Materials we repair

  • Acrylic baths
  • Resurfaced baths
  • Wet room floors (ask us)
  • Shower trays
  • Enamelled baths

How we price non-slip bath coating

There’s no charge for travel to Brean. The price comes down to:

  • The size and number of damaged areas
  • The type of damage
  • Access to the area
  • The material

Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access.

Quotes from your pictures

The better the photos, the more accurate the price. Here’s what helps:

  • Where you are, by postcode
  • Whether it’s been repaired or coated before
  • Something in shot to show the size
  • One picture of the whole bath or shower tray

There’s no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.

Signs you need non-slip bath coating in Brean

Smooth surfaces are easy to clean, yet wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.

If you can see any of these, send us a photo:

  • Resurfaced baths that are now too smooth
  • A bath or tray that is slippery when wet
  • Safety for older or less mobile people
  • Bath mats that harbour mould or get forgotten

What your quote should include

  • A fixed price, and whether VAT is included
  • Aftercare advice
  • What the guarantee covers, and for how long
  • What preparation is included

10 questions to ask before you book

How the visit works

We turn up when we said we would, introduces themselves and checks the damage against your photos first. Dust sheets and masking tape go down before we open a single tin. The work itself takes a morning or an afternoon, and we leave the room as we found it.

  1. We start by degreasing the area where you stand.
  2. We mask out the area to be treated.
  3. We put on the clear non-slip coating.
  4. We remove the masking for a neat edge.
  5. We leave it to cure, typically overnight.

Preparing for the visit

  • Avoid using the area for a few hours before we arrive
  • Make sure the room can be ventilated
  • Mention any earlier repairs or resurfacing

How to get a price

A quote takes minutes to ask for: take one close-up and one wider shot of the bath or shower tray, add your postcode and send them to us. You will get a fixed price, not an estimate.

Get a fixed price

Read more

Should you replace it?

The alternatives are a new textured bath or tray, or relying on a mat that needs lifting and cleaning. A coating treats your existing bath or tray. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.

Why book with us

  • No need to remove anything
  • Generally one visit, start to finish
  • Work done at your home or business
  • Every repair guaranteed for a year

Read our full price list.

Questions from Brean

Is my repair covered?

Yes, for a year. If there’s a problem with the work in that time, we come back and put it right.

Will it make a mess?

No. The work area is masked and covered, and we take our waste away with us.

Can you repair several things at once?

Yes, and it’s frequently cheaper. Just add the extra items to your pictures and you’ll get one combined price.

Is it worth repairing rather than replacing?

In most cases, yes. A repair skips the removal, fitting and redecorating. We’ll be honest if it’s not worth it.

What does non-slip bath coating cost?

We give a fixed quote based on pictures of the damage. Send a close-up and a photo of the entire item with your TA8 postcode.

Will there be a smell?

Some materials have a smell while they’re applied, so we ventilate the room. It fades as everything cures.

Do I have to be there?

We need someone to let us in. After that, you can carry on with your day.

Will the price change on the day?

Your quote covers the damage in the photos. Anything extra is discussed before we begin.

Landlord and trade work in Brean

We’re used to working with agents and managing companies. Just send photos, the address and how to get access.

Letting agents often send us pictures straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.