Powys · Wales

Non-Slip Bath Coating in Brecon

Non-slip bath coating for Brecon, without a refit. Send us photos for a fixed price, then book a visit.

  • Resurfaced baths that are now too smooth
  • Worn-out textured areas
  • Safety for older or less mobile people
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating for Brecon homes

What we do, step by step

We work cleanly and quietly, so you can stay at home while we are there. Protection goes down first, then the work takes a few hours. Before we leave, we explain the curing time and the aftercare.

  1. We clean and degrease the standing area.
  2. The area to be treated is masked out.
  3. We apply the clear textured coating.
  4. The masking comes off to leave a neat edge.
  5. We leave it to cure, usually overnight.

Getting ready for the visit

  • Open a window if you can
  • Keep pets and children out of the room while we work
  • Mention if the room is upstairs or in a flat

Ask for a price

We price from photos so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through.

Get a free quote

Advice

How we handle non-slip bath coating in Brecon

It’s popular with older people, families and holiday lets. It’s a clear, textured coating, so the bath looks much the same. Typical jobs include a bath or tray that is slippery when wet and safety for older or less mobile people, on shower trays, resurfaced baths and enamelled baths.

You are covered after we leave: our one-year guarantee applies to every job, and we explain what it covers before booking. Clean with a soft brush and a mild cleaner. Don’t use abrasive pads on the textured area.

Before and after: an old shower tray refinished by Surface Doctor
Area
Brecon (LD3)
Area hub
Powys
Cover
A year, on every repair
Quotes
Free, fixed price from pictures
Telephone
0345 017 0787
Last updated
23 October 2026

Do you need non-slip bath coating in Brecon?

Smooth surfaces are easy to clean, yet wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.

Send us a photo if you notice any of these:

  • A bath or tray that is slippery when wet
  • Resurfaced baths that are now too smooth
  • Worn-out textured areas
  • Bath mats that harbour mould or get forgotten

What your quote should include

  • Aftercare advice
  • Whether the price covers travel
  • How the colour is matched
  • How the room is protected while they work

Our hiring checklist

Brecon questions

Do you hold any accreditations?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

When can you do it?

Your quote comes with available dates. Tell us if you need it done quickly.

Do you work for landlords and businesses?

Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses in Brecon.

Is the work guaranteed?

Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.

Can you do more than one item on the same visit?

Yes. Doing several items on one visit generally costs less than separate visits. Include photos of each item.

I rent my home. Can I book you?

We can work for tenants, landlords or agents. Just make sure the landlord agrees.

How do I clean it?

Yes. A soft brush and mild cleaner is all it needs.

It’s been repaired before. Can you still fix it?

Yes, regularly. It can add a little time, which we include in the quote.

How we price non-slip bath coating

A fixed quote means you know the cost before you book. We take into account:

  • Whether it’s a chip, crack, burn or wear
  • Whether we combine several jobs
  • The material
  • Access to the area

Rather than charging by the hour, we price the whole job up front. It depends on the damage, the material and access.

Send photos for a quote

Most quotes are done from photos alone. To make it quick:

  • One sharp close-up of the damage
  • Details of any past repairs
  • Good light, ideally daylight, without flash glare
  • A coin beside the damage so we can judge size

Send us a photo of the damage and a wider shot of the whole item, with your LD3 postcode, and we’ll reply with a fixed quote.

Where we work around Brecon

Brecon (Welsh: Aberhonddu) is about 13 miles north of Merthyr Tydfil, in Powys. Wherever you are in the LD3 postcode area, we carry out the work at your property. Brecon is one of 234 towns and villages in Powys where we work. We work right across the region, from Brecon to Birmingham (73 miles away).

All of LD3 is within our area, from the main roads to the quietest streets. We regularly work on streets such as High Street Inferior, High Street and Bethel Square. Main roads around Brecon include the A40 and A470, so getting to you is simple. If you’re just outside Brecon, we cover Pendre (1 mile north), Llanfaes (1 mile west), Llanddew (2 miles north-east), Llanfrynach (3 miles south-east) and Talachddu (4 miles north-east). Larger places within reach include Llanfair-ym-Muallt (14 miles north), Crughywel (12 miles south-east), Talgarth (8 miles north-east), Llanelwedd (14 miles north), Llangynidr (9 miles south-east) and Llanwrtyd Wells (15 miles north-west). Brecon is among the bigger towns we cover in Powys.

Local landmarks in Brecon

We visit homes around Ysgol Golwg Pen Y Fan, Cantref Adventure Farm and Riding Centre and Roman Catholic Church of St Michael, among other places. Further afield, we also cover the area around Brecon War Memorial Hospital (within half a mile east) and Brecon Castle (less than half a mile north-west). The countryside around Brecon includes Ty Mawr Pool and Slwch Tump.

  • Local facilities include St Mary (0.6 miles east)
Map of Brecon © OpenStreetMap contributors

For landlords and businesses

Housing associations and facilities teams use us for planned and reactive repairs in Powys and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.

Builders use us to fix snagging damage before handover, so there is no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.

Should you replace it?

The alternatives are a new textured bath or tray, or relying on a mat that needs lifting and cleaning. A coating adds grip to the bath you have. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.

What you get with us

  • One-year guarantee on every repair
  • CHAS and Constructionline accredited
  • Fixed prices from your photos
  • Honest advice, even when it means no job

Take a look at our prices page.

Can I fix it myself?

We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.

If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send photos.

What a repair cannot fix

Some problems need a builder, plumber or fitter rather than us:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Not sure? Send photos and we will give you a straight answer.

Materials we repair

  • Acrylic baths
  • Shower trays
  • Resurfaced baths
  • Enamelled baths
  • Wet room floors (ask us)
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.