Herefordshire · England

Non-Slip Bath Coating for Bredwardine homes

Non-slip bath coating in Bredwardine without the cost of replacing. Get a fixed price from your photos, then we come to you.

  • Worn-out textured areas
  • Resurfaced baths that are now too smooth
  • A bath or tray that is slippery when wet
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted non-slip bath coating in Bredwardine

Work for landlords and builders

We work for landlords, letting agents and housing providers in Bredwardine as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.

For anyone letting property in or around Bredwardine, we will quote for several properties at once. Just send photos for each address and we’ll price them together.

Non-slip bath coating in Bredwardine, done in place

It suits homes with older or less mobile people, holiday lets and families. It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. Typical jobs include bath mats that harbour mould or get forgotten and worn-out textured areas, on acrylic baths, resurfaced baths and wet room floors (ask us).

We stand behind the work with a one-year guarantee, so you are not left on your own once we’ve gone. A soft brush and mild cleaner keep it clean. Avoid scourers on the coating.

Where
Bredwardine (HR3)
Region
Herefordshire
Warranty
12 months on all our work
Quote
Free, fixed price from pictures
Call
0345 017 0787
Last updated
23 October 2026
Discoloured square shower tray restored with a new white finish

How we price non-slip bath coating

We price every job individually. The main factors are:

  • Previous DIY repairs that have to come out
  • The material
  • Where the damage is and how we get to it
  • How many areas need work

We charge the same wherever you are, so there’s no premium for Bredwardine. What changes the price is the job itself: the material, the amount of damage and how many items.

How to get a fixed price

Two or three clear photos are usually enough. It helps if you send:

  • Any earlier repairs or coatings
  • One picture of the whole bath or shower tray
  • The material, if you know it
  • A clear, close picture of the problem area

You don’t need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.

Why repair rather than replace?

Instead, you could go for a new textured bath or tray, or relying on a mat, which traps water and needs cleaning. A non-slip coating treats your existing bath or tray. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.

Why us?

  • Every repair guaranteed for a year
  • Most jobs done in one visit
  • Free fixed quotes from pictures
  • Everything repaired in place

Read our full price list.

Where we work around Bredwardine

Bredwardine is about 11 miles west of Hereford, in Herefordshire. From the centre of Bredwardine to the outlying streets, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. Bredwardine is one of 255 towns and villages in Herefordshire where we work. You can also see our page for Birmingham, about 53 miles away.

Here we cover the HR3 postcode area. From Orchard Place and Bredwarine Hill or anywhere nearby, we can come to you. We also cover the places around Bredwardine: Moccas (2 miles south-east), Monnington on Wye (2 miles east), Snodhill (3 miles south), Hinton (4 miles south) and Peterchurch (4 miles south). Further out, we also cover Hereford (11 miles east), Leominster (13 miles north-east), Redhill (11 miles east), Newton Farm (11 miles east), Whitecross (11 miles east) and Eign Hill (12 miles east).

Near you in Bredwardine

We visit homes around Church of St Andrew and the streets around them. Further afield, we also cover the area around Bredwardine Castle (within half a mile south-east). Not far away are Merbach Hill.

Map of Bredwardine © OpenStreetMap contributors

What we are called out for in Bredwardine

Baths and trays are made smooth so they’re easy to clean, but with soap and water on them they become slippery. Textured areas on older baths wear smooth too.

Most people contact us after spotting something like this:

  • Worn-out textured areas
  • Resurfaced baths that are now too smooth
  • A bath or tray that is slippery when wet
  • Safety for older or less mobile people

Before booking anyone

  • Who turns up on the day
  • What preparation is included
  • How to look after the finish
  • Whether there are any call-out or travel charges

How to compare quotes

Should I try a DIY kit first?

Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is typically the cheaper route.

If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it does not stop a professional repair. Just mention it when you send photos, as it can add time.

When we’d advise against a repair

Before you book, it’s worth knowing the limits:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Not sure? Send photos and we’ll give you a straight answer.

What we work on

  • Acrylic baths
  • Enamelled baths
  • Resurfaced baths
  • Wet room floors (ask us)
  • Shower trays

What happens on the day

The work is clean and fairly quiet, so you can carry on at home. Protection goes down first, then the work takes a morning or an afternoon. At the end we talk you through the curing time and the aftercare.

  1. We start by degreasing the area where you stand.
  2. We mask out the area to be treated.
  3. We apply the clear textured coating.
  4. We remove the masking for a neat edge.
  5. We leave it to cure, typically overnight.

Getting ready for the visit

  • Have a window or extractor fan available
  • Plan for the room to be out of bounds to pets and children
  • Avoid using the area for a few hours before we arrive

How to get a price

A quote takes minutes to ask for: take one close-up and one wider shot of the bath or shower tray, add your postcode and send them over. What comes back is a fixed price, not a guess.

Send photos for a quote

Read more

Questions from Bredwardine

Is there a call-out fee?

Travel is included in the price, and we charge the same wherever you are.

Will there be a smell?

There may be a mild smell during the work, which fades afterwards.

How soon can you come?

We will give you dates with your quote. If it’s urgent, say so and we will do what we can.

Is repairing better than replacing?

Generally, yes. A repair skips the removal, fitting and redecorating. We’ll be honest if it’s not worth it.

Are you accredited?

We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

Can you redo someone else’s repair?

In most cases. The old repair comes out first.

Can pets and children be at home?

On the day, the room should be kept clear of pets and children.

Can you quote from photos?

Yes, almost always. Clear photos let us give you a fixed quote without visiting.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.