Sheffield · England

Non-Slip Bath Coating for Brightside homes

Clear non-slip coatings for baths and shower trays for homeowners, landlords and businesses in Brightside. Send pictures for a free, fixed quote.

  • Resurfaced baths that are now too smooth
  • Safety for older or less mobile people
  • A bath or tray that is slippery when wet
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating in Brightside

Non-slip bath coating at your home in Brightside

It’s a clear, textured coating, so the bath looks much the same. It’s popular with homes with older or less mobile people, holiday lets and families. If you are dealing with resurfaced baths that are now too smooth and bath mats that harbour mould or get forgotten, we can typically put it right, whatever the material.

A one-year guarantee comes as standard, so you’re covered after the visit. A soft brush and mild cleaner keep it clean. Don’t use abrasive pads on the textured area.

Area
Brightside (S98, S4, S9)
Area hub
Sheffield
Cover
One year on every repair
Quote
Fixed and free, based on pictures
Call
0345 017 0787
Updated
23 October 2026
Discoloured square shower tray restored with a new white finish

Work for landlords and builders

Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.

Hospitality businesses can’t afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.

Common questions in Brightside

Can you repair something that is been repaired before?

In most cases. The old repair comes out first.

Is repairing better than replacing?

Typically, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. We’ll tell you honestly if replacement makes more sense.

Can tenants book a repair?

Yes. Check with your landlord; we can send the quote to them too.

Are you accredited?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

Do you work for landlords and businesses?

We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.

How do I book?

Use the quote form or ring 0345 017 0787, and we will do the rest.

Will I see the coating?

Only slightly: the treated area looks slightly matt.

What happens if you find more damage?

Your quote covers the damage in the photos. Anything extra is discussed before we begin.

Common problems we fix in Brightside

Smooth surfaces are easy to clean, yet wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.

Send us a photo if you notice any of these:

  • Worn-out textured areas
  • Resurfaced baths that are now too smooth
  • Bath mats that harbour mould or get forgotten
  • Safety for older or less mobile people

Before booking anyone

  • Whether the price is fixed and includes VAT
  • Whether the price covers travel
  • How changes to the job are handled
  • How your room will be protected

Our hiring checklist

DIY repairs versus a professional job

If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it doesn’t stop a professional repair. Just mention it when you send pictures, as it can add time.

A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.

When we’d advise against a repair

A repair isn’t always the answer, and we’ll tell you before we start. Repairs won’t solve:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

If in doubt, send pictures and we will say what we think before booking.

What we work on

  • Shower trays
  • Wet room floors (ask us)
  • Acrylic baths
  • Resurfaced baths
  • Enamelled baths

What happens on the day

We work cleanly and quietly. We protect the area first, then the job itself takes a few hours. At the end we talk you through the curing time and the aftercare.

  1. We start by degreasing the area where you stand.
  2. The area to be treated is masked out.
  3. We put on the clear non-slip coating.
  4. We remove the masking for a neat edge.
  5. The coating is left to cure before use, typically overnight.

How to prepare

  • Clear toiletries, mats and anything else from around the area
  • Let us know which floor the room is on
  • Open a window if you can

Get a quote

Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the entire bath or shower tray, we can give you a fixed quote.

Get a fixed quote

Read more

How we price non-slip bath coating

You will not pay by the hour. The price is based on:

  • Where the damage is and how we get to it
  • The material and finish
  • The colour and finish to match
  • Any earlier repairs that need removing first

We charge the same wherever you are, with no extra for Brightside. What changes the price is the job itself: the material, the amount of damage and how many items.

How to get a fixed price

You can take the photos on your phone, there’s no need for anything special. Just make sure we can see:

  • What it’s made of, if you know
  • Details of any past repairs
  • A coin beside the damage so we can judge size
  • Your postcode, so we can check dates

The quickest way to a price is to send two or three photos through our quote form or ring us. We’ll say right away whether it can be repaired.

Repair or replace in Brightside?

The alternatives are replacing the bath or tray with a textured one, or a bath mat, which traps water and needs cleaning. A non-slip coating treats your existing bath or tray. The price depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. You get a fixed price from your photos, so you know the cost before booking.

Why us?

  • Most jobs done in one visit
  • One price list for the entire UK
  • Accredited with CHAS, Constructionline and SafeContractor
  • One-year guarantee on every repair

Take a look at our pricing.

About Brightside

Brightside is about 1 mile north-west of Carbrook, in Sheffield. Whether you are in the middle of Brightside or on the outskirts, the service is the same: a fixed price, a tidy visit and a guarantee. We work in 118 places across Sheffield, from the larger towns to small villages. We work right across the region, from Brightside to Leeds (about 28 miles away).

Our visits in S98, S4 and S9 work the same way as everywhere else we cover. From Don Road, Alfred Road and Rothay Road or anywhere nearby, a technician can come to you. Main roads around Brightside include the A6109, which makes travel easy. Other places close to Brightside include Grimesthorpe (1 mile north-west), Page Hall (1 mile north-west), Wincobank (1 mile north), Pitsmoor (1 mile west) and Firth Park (1 mile north-west). Larger places within reach include Sheffield (3 miles south-west), West End (3 miles south-west), Walkley (3 miles west), Broomhall (3 miles south-west), Chapeltown (4 miles north) and Highfield (3 miles south-west).

Around Brightside

We visit homes around St Thomas, Owler Brook Primary School and Abbeyfield Park. Also close by are UTC Sheffield Olympic Legacy Park (0.6 miles south-east), The Britannia Public House (0.7 miles south) and Fir Vale School (0.6 miles north-west). For rail, the closest station is Meadowhall station, about 1.2 miles north-east. A little further out are Northern General Hospital (1.1 miles north-west) and Meadowhall Centre (1.2 miles north-east). For a walk, there is Greno Woods.

  • Other local spots include Central (2.7 miles south-west)
Map of Brightside © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.