Hertfordshire · England
Non-Slip Bath Coating in Bulbourne
Clear non-slip coatings for baths and shower trays in Bulbourne, carried out at your home and guaranteed for a year.
- Bath mats that harbour mould or get forgotten
- A bath or tray that is slippery when wet
- Worn-out textured areas
What non-slip bath coating costs
We don’t charge extra for travel to Bulbourne. The price comes down to:
- The colour and finish to match
- The material
- How easy the damage is to reach
- Whether we combine several jobs
The price depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. You get a fixed price from your pictures, so there are no surprises on the day.
Getting a price from photos
Two or three clear pictures are normally enough. It helps if you send:
- A picture taken from further back
- Whether it’s been repaired or coated before
- A coin beside the damage so we can judge size
- One sharp close-up of the damage
To get a price, send two or three photos through our quote form or ring us. We will tell you honestly whether it can be repaired.
Non-slip bath coating in Bulbourne, done in place
It’s a clear, textured coating, so the bath looks much the same. It’s popular with older people, families and holiday lets. Typical jobs include a bath or tray that is slippery when wet and bath mats that harbour mould or get forgotten, in enamelled baths, wet room floors (ask us) and acrylic baths.
A one-year guarantee comes with the work, just as it does everywhere we cover. A soft brush and mild cleaner keep it clean. Don’t use abrasive pads on the textured area.
- Where
- Bulbourne (HP23)
- County
- Hertfordshire
- Cover
- A year, on every repair
- Quotes
- Free and fixed, from your photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
The process
Nothing needs to be moved out of the room beforehand. Everything we use comes in the van with us, put protection down and start once you’re happy with the plan. Most jobs take a few hours, and you’re welcome to carry on with your day while we work.
- First the standing area is cleaned and degreased.
- Next we mask off the area.
- The clear textured coating is applied.
- The masking comes off to leave a neat edge.
- We leave it to cure, normally overnight.
Getting ready for the visit
- Make sure the room can be ventilated
- Keep a parking space free if you can
- Mention if the room is upstairs or in a flat
Ask for a price
There’s no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed quote.
Advice
When a repair isn’t the answer
Honesty matters more than a booking, so here’s what a repair cannot fix:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Not sure? Send photos and we’ll give you a straight answer before you book.
Materials we repair
- Enamelled baths
- Shower trays
- Resurfaced baths
- Wet room floors (ask us)
- Acrylic baths
Repair or replace: which is better?
Instead, you could go for a new textured bath or tray, or relying on a mat, which traps water and needs cleaning. A coating treats your existing bath or tray. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send photos and you will get a fixed figure.
Why us?
- A fixed quote before booking
- No extra charge for your area
- A year’s guarantee on all work
- Honest advice, even when it means no job
Take a look at our pricing.
Do you need non-slip bath coating in Bulbourne?
Baths and trays are made smooth so they’re easy to clean, yet with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.
Most people get in touch when they notice one of these:
- Worn-out textured areas
- Bath mats that harbour mould or get forgotten
- Resurfaced baths that are now too smooth
- A bath or tray that is slippery when wet
Before you book anyone
- Whether the colour is mixed to match
- What the guarantee covers, and for how long
- Who turns up on the day
- Whether cleaning and preparation are in the price
Bulbourne questions
Will a non-slip coating change how my bath looks?
Very little: the treated area looks slightly matt.
Will there be a smell?
There may be a mild smell during the work.
What does non-slip bath coating cost?
Every job gets a fixed quote based on pictures of the damage. Send a close-up of the damage and a wider photo and your postcode.
What happens next?
You will get a fixed quote back, plus dates. You’re under no obligation.
Can landlords book you?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Do I need to be at home?
Someone needs to let us in and show us the job. You do not need to watch us work.
Is my repair covered?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Can you redo someone else’s repair?
In most cases. The old repair comes out first, so mention it when you send photos.
Work for landlords and builders
Hospitality businesses can’t afford rooms out of action for long, so we keep visits short and tidy. We will fit around changeovers where we can.
Landlords, letting agents and housing providers in Bulbourne use us as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
Our work in Bulbourne
Bulbourne is about 5 miles north-west of Berkhamsted, in Hertfordshire. We work in every kind of home, old or new, large or small, plus businesses and rented homes. We work in all 381 towns and villages across Hertfordshire. Our nearest city page is London, about 32 miles away.
We cover every part of the HP23 postcode area and the streets around it. Local streets include Bulbourne Yard and Bulbourne Road, all of which we cover. Other places close to Bulbourne include Marsworth (1 mile north-west), Startop's End (1 mile west), Tringford (1 mile west), Pitstone (1 mile north) and Wilstone (2 miles west). Further out, we also cover Watford (15 miles south-east), Hemel Hempstead (9 miles south-east), St Albans (14 miles east), Harpenden (13 miles east), Berkhamsted (5 miles south-east) and Rickmansworth (14 miles south-east).
Around Bulbourne
Typical jobs here are in homes near The White Lion pub, Tring School and Grove Road Primary School. For rail, the closest station is Tring station, about 1.5 miles south-east. A little further out are Pitstone Green Museum (1.2 miles north). The countryside around Bulbourne includes College Lake nature reserve and Ivinghoe Beacon.
Should I try a DIY kit first?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
Also near Bulbourne
More services for Bulbourne
About our accreditations · Every repair comes with a one-year guarantee.
