Central Bedfordshire · England
Non-Slip Bath Coating in Pitstone
Non-slip bath coating across Pitstone and nearby, done in a single visit in most cases.
- Worn-out textured areas
- A bath or tray that is slippery when wet
- Safety for older or less mobile people
Non-slip bath coating at your home in Pitstone
It’s a clear, textured coating, so the bath looks much the same. It suits homes with older or less mobile people, holiday lets and families. We work on shower trays, acrylic baths and resurfaced baths, and people most often call us about a bath or tray that is slippery when wet and bath mats that harbour mould or get forgotten.
Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before booking. Clean with a soft brush and a mild cleaner. Don’t use abrasive pads on the textured area.
- Area
- Pitstone (LU7)
- Area hub
- Central Bedfordshire
- Guarantee
- One year on every repair
- Price
- Free and fixed, from your pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Work for landlords and builders
We work for landlords, letting agents and housing providers in Pitstone as well as homeowners. A repair between tenants keeps the property empty for less time, and it generally costs far less than a refit.
We are used to working with agents and managing companies. Just send photos, the address and how to get access and we will handle the rest.
Your questions about non-slip bath coating in Pitstone
What information do you need?
Send pictures through the quote form or call 0345 017 0787, and we’ll do the rest.
Is it OK to have pets in the house?
Just keep them out of the work area. We’ll tell you when the room can be used again.
Is it worth repairing rather than replacing?
Typically, when the rest is in good condition. A repair avoids removal and making good. We will tell you honestly if replacement makes more sense.
Can you do more than one item on the same visit?
Yes. Doing several items on one visit normally costs less than separate visits. Include pictures of each item.
What does non-slip bath coating cost?
Every job gets a fixed price based on pictures of the damage. Send a close-up of the damage and a wider photo and your postcode.
I’m a tenant. Can you help?
Yes. Check with your landlord; we can send the quote to them too.
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Will a non-slip coating change how my bath looks?
Only slightly: the treated area looks slightly matt.
What a repair can’t fix
Some jobs aren’t right for a repair, including:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Send us photos and we will tell you honestly before booking.
What we work on
- Acrylic baths
- Resurfaced baths
- Shower trays
- Enamelled baths
- Wet room floors (ask us)
About Pitstone
Pitstone is about 5 miles north-west of Berkhamsted, in Central Bedfordshire. Anywhere in LU7, we come to you. We cover all 121 towns and villages across Central Bedfordshire, from the larger towns to small villages. We work right across the region, from Pitstone to London (about 33 miles away).
Postcode districts we cover here: LU7. Streets in the area include Church Road, The Pightle and Windsor Road. Other places close to Pitstone include Ivinghoe (1 mile north-east), Bulbourne (1 mile south), Marsworth (1 mile south-west), Startop's End (1 mile south-west) and Tringford (2 miles south-west). We also work in nearby towns such as Leighton Buzzard (6 miles north), Dunstable (6 miles north-east), Houghton Regis (8 miles north-east), Flitwick (14 miles north-east), Linslade (7 miles north) and Ampthill (15 miles north-east).
What’s near Pitstone
Typical jobs here are in homes near St Mary's Church, The Duke of Wellington pub and Brookmead School, among other places. For rail, the closest station is Tring station, roughly 2.1 miles south-east. Nearby you will also find Pitstone Green Museum (under half a mile north). Open spaces near Pitstone include Ivinghoe Beacon and College Lake nature reserve.
Why repair rather than replace?
Instead, you could go for a new textured bath or tray, or relying on a mat that needs lifting and cleaning. A non-slip coating adds grip to the bath you have. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
What you get with us
- Everything repaired in place
- Generally one visit, start to finish
- Honest advice, even when it means no job
- We leave the room as we found it
Read our pricing.
DIY repairs versus a professional job
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and do not use it until it has fully cured. If it fails, we can still put it right.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.
Also near Pitstone
Other services in Pitstone
How we price non-slip bath coating
Each job gets its own fixed quote. This is what makes a difference:
- How many items we do on one visit
- Access to the area
- The material
- Previous DIY repairs that have to come out
What it costs depends on the type and amount of damage, the material and how many jobs we combine into one visit. We give a fixed quote from your pictures, so you know the cost before you book.
Quotes from your photos
You can take the pictures on your phone, there is no need for anything special. Just ensure we can see:
- A clear, close picture of the problem area
- Any earlier repairs or coatings
- Good light, ideally daylight, without flash glare
- Where you are, by postcode
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
The process
Here’s how a visit normally runs: we arrive on time, sheet and mask the area around the job, do the job and clear up. Plan for a few hours. Before we go, we’ll explain how long to leave it and what to avoid for the first few days.
- We start by degreasing the area where you stand.
- The area to be treated is masked out.
- The clear textured coating is applied.
- We lift the masking for a clean edge.
- Once it has cured, normally overnight, it’s ready.
How to prepare
- Tell us about any previous repairs or coatings
- Keep pets and children out of the room while we work
- Keep a parking space free if you can
Get a quote
Email us photos of the damage and a wider shot of the entire item, with your LU7 postcode, and we’ll come back with a fixed quote.
Related advice
Common problems we fix in Pitstone
Baths and trays are made smooth so they’re easy to clean, but wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.
Most people contact us when they notice one of these:
- Bath mats that harbour mould or get forgotten
- Safety for older or less mobile people
- Worn-out textured areas
- Resurfaced baths that are now too smooth
Questions to ask before you book
- When it can be used again
- Whether the price covers travel
- What aftercare is recommended
- The length of the guarantee and what it covers
About our accreditations · Every repair comes with a one-year guarantee.
