Derbyshire · England
Non-slip bath & shower coating in Burbage, Derbyshire
Clear non-slip coatings for baths and shower trays at your home in Burbage, with a one-year guarantee on every repair.
- Resurfaced baths that are now too smooth
- Worn-out textured areas
- Safety for older or less mobile people
Non-slip bath coating in Burbage, done in place
It’s a clear, textured coating, so the bath looks much the same. It’s popular with older people, families and holiday lets. We’re often asked to fix resurfaced baths that are now too smooth and a bath or tray that is slippery when wet, in resurfaced baths, wet room floors (ask us) and enamelled baths.
A one-year guarantee comes with the work, just as it does everywhere we cover. A soft brush and mild cleaner keep it clean. Avoid scourers on the coating.
- Location
- Burbage (SK17)
- Region
- Derbyshire
- Warranty
- 12 months on all our work
- Quote
- Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
When we would advise against a repair
To be straight with you, some problems need a different fix:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Not sure? Send photos and we will give you a straight answer.
Materials we repair
- Acrylic baths
- Shower trays
- Resurfaced baths
- Wet room floors (ask us)
- Enamelled baths
The process
The work is clean and fairly quiet. Protection goes down first, then the job itself takes a few hours. Before we leave, we explain how soon it can be used and how to look after it.
- We start by degreasing the area where you stand.
- The area to be treated is masked out.
- We apply the clear textured coating.
- The masking comes off to leave a neat edge.
- We leave it to cure, typically overnight.
Before we arrive
- Point us to the nearest place to park
- Clear toiletries, mats and anything else from around the area
- Avoid using the area for a few hours before we arrive
Get a quote
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath or shower tray, include your postcode and send them to us. You will get a fixed price, not an estimate.
Related advice
DIY kit or professional repair?
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is generally cheaper.
Burbage: your questions answered
Is there a guarantee?
All our work carries our one-year guarantee. Ask us what it covers when you get your quote.
Can you redo someone else’s repair?
In most cases. We remove the old repair before doing a new one, so let us know about it.
Can you repair several things at once?
Yes. Doing several items on one visit normally costs less than separate visits. Send photos of everything you’d like done.
Is it worth repairing rather than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. We’ll be honest if it’s not worth it.
Do you work in Burbage?
Yes. We cover the entire UK and come to Burbage. Send us photos for a fixed quote, or call 0345 017 0787.
Will you leave a mess?
No. The work area is masked and covered, and we leave the room clean.
Do you work for landlords and businesses?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses in Burbage.
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Burbage and nearby
Burbage is about 1 mile west of Buxton, in Derbyshire. Book a date that suits you, and you will know when to expect us, so there is no waiting around. Burbage is one of 532 places in Derbyshire where we work. We work right across the region, from Burbage to Manchester (19 miles away).
Jobs in SK17 work the same way as everywhere else we cover. Local streets include Leek Road, Green Lane and Temple Road. Main roads around Burbage include the A53, so getting to you is simple. Neighbouring places we cover include Ann Croft (1 mile south-west), Ladmanlow (1 mile south-west), Buxton (1 mile east), Staden (1 mile east) and Harpur Hill (2 miles south-east). We also work in nearby towns such as Glossop (13 miles north), New Mills (8 miles north), Hadfield (14 miles north), Chapel-en-le-Frith (5 miles north), Bakewell (11 miles east) and Darley Dale (15 miles south-east).
What’s near Burbage
Locally, our jobs take us to homes close to Christ Church, Burbage Primary School and Buxton Community School, among other places. You’ll also find St Thomas More Catholic School (0.9 miles north-east), The Duke pub (less than half a mile west) and Buxton Pavilion Gardens (0.5 miles north-east). Burbage’s nearest station is Buxton station, about 0.9 miles north-east of the centre. A little further out are Municipal Borough of Buxton (0.9 miles north-east) and Devonshire Royal Hospital (0.7 miles north-east). Green spaces nearby include Grin Low and Harpur Hill Quarry.
Do you need non-slip bath coating in Burbage?
Baths and trays are made smooth so they’re easy to clean, yet with soap and water on them they become slippery. Textured areas on older baths wear smooth too.
People normally call us when they notice one of these:
- A bath or tray that is slippery when wet
- Worn-out textured areas
- Bath mats that harbour mould or get forgotten
- Safety for older or less mobile people
Questions to ask before booking
- Who turns up on the day
- What happens if the damage is worse than the photos show
- How the room is protected while they work
- A fixed price, and whether VAT is included
Towns and villages near Burbage
More services for Burbage
Repair or replace: which is better?
The alternatives are replacing the bath or tray with a textured one, or relying on a mat that needs lifting and cleaning. A non-slip coating adds grip to the bath you have. A repair usually costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
What you get with us
- Typically one visit, start to finish
- CHAS and Constructionline accredited
- Rooms protected and left tidy
- Straight answers about what a repair can do
See our pricing.
Landlords, agents and businesses in Burbage
We carry out planned and one-off repairs for housing associations and facilities teams in Derbyshire and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
Prices and what affects them
There are no hourly rates or hidden extras. The price is based on:
- Whether we combine several jobs
- How easy the damage is to reach
- What kind of damage it is
- The material
Rather than charging by the hour, we price the entire job up front. It depends on the damage, the material and access, and doing several items at once reduces it.
Send photos for a quote
A couple of clear pictures is all it takes. It helps if you send:
- Any earlier repairs or coatings
- The postcode, so we can plan the visit
- Good light, ideally daylight, without flash glare
- A wider photo showing the whole bath or shower tray
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the entire bath or shower tray, we can price the job without visiting.
About our accreditations · Every repair comes with a one-year guarantee.
