Cheshire East · England

Non-slip bath & shower coating in Burland, Cheshire East

Clear non-slip coatings for baths and shower trays for homes and businesses in Burland and across Cheshire East. Send photos for a free, fixed quote.

  • Worn-out textured areas
  • Resurfaced baths that are now too smooth
  • A bath or tray that is slippery when wet
Surface Doctor technician refinishing the outside of a roll-top bath

Need non-slip bath coating in Burland?

Should you replace it?

Instead, you could go for a new textured bath or tray, or relying on a mat that needs lifting and cleaning. A non-slip coating treats your existing bath or tray. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.

Why choose Surface Doctor in Burland

  • A fixed quote before booking
  • Typically one visit, start to finish
  • No extra charge for your area
  • Work done at your home or business

See our prices page.

Non-slip bath coating in Burland, done in place

It suits homes with older or less mobile people, holiday lets and families. The coating is clear and textured, so the bath looks much the same. We work on wet room floors (ask us), enamelled baths and acrylic baths, and common reasons people contact us are worn-out textured areas and resurfaced baths that are now too smooth.

You’re covered after we leave: each job carries a one-year guarantee, and we explain what it covers before you book. Clean with a soft brush and a mild cleaner. Do not use abrasive pads on the textured area.

Where
Burland (CW5)
County
Cheshire East
Guarantee
A year, on every repair
Price
Free and fixed, from your photos
Call
0345 017 0787
Updated
23 October 2026
Stained shower tray resurfaced to clean white, before and after

What a repair can’t fix

Some jobs are not right for a repair, for example:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Send us pictures and we will tell you honestly before you book.

Materials we repair

  • Wet room floors (ask us)
  • Resurfaced baths
  • Acrylic baths
  • Shower trays
  • Enamelled baths

DIY repairs versus a professional job

For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.

If you do try a kit, read the instructions carefully, and don’t use it until it has fully cured. If it does not work out, we can still repair it properly.

Landlord and trade work in Burland

Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.

For developers and builders, we fix damage before handover. We can visit several plots in one trip to keep costs down.

Burland: your questions answered

Do you cover Burland?

Yes. We cover the whole UK and travel to Burland and the rest of Cheshire East. Send photos and we will quote, or call 0345 017 0787.

Do I have to be there?

Someone needs to let us in and show us the job. You do not need to watch us work.

Can tenants book a repair?

We can work for tenants, landlords or agents. Get your landlord’s agreement first.

Will it make a mess?

Very little mess: we sheet and mask everything nearby, and we take our waste away with us.

Are there extra charges for Burland?

Travel is included in the price, with the same prices everywhere we work.

When can you do it?

Your quote comes with available dates. Tell us if you need it done quickly.

It’s been repaired before. Can you still fix it?

Yes, we frequently do. Removing the old work can add time, and that’s in the quote.

Is a repair better than a new one?

Normally, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. We’ll tell you honestly if replacement makes more sense.

How we price non-slip bath coating

There are no hourly rates or hidden extras. The price depends on:

  • How easy the damage is to reach
  • Whether old repairs or coatings need taking off
  • How many areas need work
  • Whether we combine several jobs

Our prices are the same across the UK, so there is no premium for Burland. The job itself decides the price: how much damage, what it’s made of and how many items.

Quotes from your photos

You can take the photos on your phone. Just make sure we can see:

  • Good light, ideally daylight, without flash glare
  • Something in shot to show the size
  • One sharp close-up of the damage
  • What it’s made of, if you know

Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath or shower tray, add your postcode and send them to us. You will get a fixed quote, not an estimate.

Do you need non-slip bath coating in Burland?

Baths and trays are made smooth so they’re easy to clean, yet with soap and water on them they become slippery. Textured areas on older baths wear smooth too.

Look out for any of the following:

  • Resurfaced baths that are now too smooth
  • Safety for older or less mobile people
  • Worn-out textured areas
  • A bath or tray that is slippery when wet

What to look for in a quote

  • If travel is included in the price
  • How your room will be protected
  • When it can be used again
  • Whether the price is fixed and includes VAT

How to compare quotes

Where we work around Burland

Burland is about 2 miles west of Nantwich, in Cheshire East. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Our repair technicians cover 254 places in Cheshire East, from the larger towns to small villages. We work right across the region, from Burland to Liverpool (about 27 miles away).

Here we cover the CW5 postcode area. Streets in the area include Wrexham Road and Shores Lane. Neighbouring places we cover include Swanley (1 mile south), Burford (1 mile north-east), Acton (1 mile east), Stoneley Green (1 mile south) and Ravensmoor (2 miles south). Further out, we also cover Crewe (5 miles east), Middlewich (9 miles north-east), Sandbach (10 miles north-east), Coppenhall (6 miles north-east), Holmes Chapel (12 miles north-east) and Leighton (5 miles north-east).

Near you in Burland

We visit homes around Acton Church of England Primary Academy, St Mary's Church and Malbank School and Sixth Form College, among other places. The closest station to Burland is Nantwich station, about 2.4 miles east of the centre. Further afield, we also cover the area around Nantwich Workhouse (2.2 miles east) and Nantwich Castle (2.1 miles east).

Map of Burland © OpenStreetMap contributors

What happens on the day

We agree an arrival time beforehand, so you know when to expect us. On site, it takes a morning or an afternoon in most cases. We leave the room clean and ready to use once it has cured.

  1. First the standing area is cleaned and degreased.
  2. The area to be treated is masked out.
  3. The clear textured coating is applied.
  4. We remove the masking for a neat edge.
  5. Once it has cured, normally overnight, it’s ready.

How to prepare

  • Tell us about any previous repairs or coatings
  • Plan for the room to be out of bounds to pets and children
  • Let us know which floor the room is on

Ask for a price

Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the whole bath or shower tray, we can give you a fixed price without visiting.

Get a free quote

Related advice

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.