Wiltshire · England
Non-Slip Bath Coating for Castle Combe homes
Clear non-slip coatings for baths and shower trays in Castle Combe, carried out at your home and guaranteed for a year.
- Safety for older or less mobile people
- Resurfaced baths that are now too smooth
- Worn-out textured areas
Covering Castle Combe
Castle Combe is about 5 miles north-west of Chippenham, in Wiltshire. Across the SN14 area, we carry out the work at your property. We cover all 425 towns and villages in Wiltshire, from the larger towns to small villages. You can also see our page for Birmingham, about 69 miles away.
Jobs in SN14 are booked in the same way as anywhere else. From The Street, West Street and Park Lane or anywhere nearby, we can come to you. Neighbouring places we cover include Upper Castle Combe (1 mile north-east), Nettleton (1 mile west), Ford (1 mile south), West Kington (2 miles west) and Slaughterford (2 miles south). Within a short drive, we also cover Trowbridge (12 miles south), Chippenham (5 miles south-east), Calne (10 miles east), Devizes (14 miles south-east), Melksham (9 miles south-east) and Corsham (5 miles south).
Around Castle Combe
We visit homes around Church of St Andrew. Other landmarks nearby include Chippenham Community Hospital (5.2 miles south-east) and Castle Combe Museum (less than half a mile north). For a walk, there’s Vincients Wood.
Non-slip bath coating in Castle Combe, done in place
The coating is clear and textured, so it shows only as a slightly matt area where you stand. It’s popular with older people, families and holiday lets. Common call-outs are for resurfaced baths that are now too smooth and worn-out textured areas, in shower trays, enamelled baths and resurfaced baths.
The work is covered for a year after we finish. Just call us if there’s a problem and we’ll sort it. A soft brush and mild cleaner keep it clean. Avoid scourers on the coating.
- Location
- Castle Combe (SN14)
- Region
- Wiltshire
- Warranty
- A year, on every repair
- Quote
- Free, fixed price from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Can I fix it myself?
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send photos, as it can add time.
Landlord and trade work in Castle Combe
If you manage property in Castle Combe, we will quote for several properties at once. Just send photos for each address and we will come back with a combined price.
Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Nearby places to Castle Combe
More services for Castle Combe
Common problems we fix in Castle Combe
Baths and trays are made smooth so they’re easy to clean, yet wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.
Signs it’s time to call us include:
- A bath or tray that is slippery when wet
- Worn-out textured areas
- Bath mats that harbour mould or get forgotten
- Resurfaced baths that are now too smooth
What to look for in a quote
- What happens if they find more damage
- What aftercare is recommended
- When it can be used again
- Whether there are any call-out or travel charges
What non-slip bath coating costs
We do not charge extra for travel to Castle Combe. The price depends on:
- Where the damage is and how we get to it
- How much damage there is
- Whether old repairs or coatings need taking off
- How hard the colour is to match
A repair usually costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
Quotes from your pictures
You can take the photos on your phone. Ensure they show:
- A close-up of the damage, in focus
- A photo taken from further back
- Details of any past repairs
- Your postcode, so we can check dates
Most customers in Castle Combe get their price from pictures. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
What a repair cannot fix
Some problems need a builder, plumber or fitter rather than us:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Not sure? Send pictures and we will give you a straight answer.
Materials we work on in Castle Combe
- Acrylic baths
- Wet room floors (ask us)
- Enamelled baths
- Shower trays
- Resurfaced baths
Why repair rather than replace?
Instead, you could go for replacing the bath or tray with a textured one, or a bath mat that needs lifting and cleaning. A coating adds grip to the bath you have. We don’t add extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Why Castle Combe clients choose us
- One price list for the whole UK
- We leave the room as we found it
- CHAS, Constructionline and SafeContractor accredited
- A year’s guarantee on all work
See our prices page.
Your questions about non-slip bath coating in Castle Combe
I rent my home. Can I book you?
Yes, but check with your landlord or agent first. Landlords are often glad to have it sorted before the end of a tenancy.
What happens after I send pictures?
We come back with a fixed quote, plus dates. You’re under no obligation.
Is repairing better than replacing?
In most cases, yes. A repair skips the removal, fitting and redecorating. We’ll be honest if it’s not worth it.
Will you leave a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
Does someone need to be in?
Yes. We need access to the room while we work, at a time that suits you.
How do I clean it?
Yes. A soft brush and mild cleaner is all it needs.
Is there any odour?
There can be some smell while we work. It clears as the materials cure.
Can you quote from pictures?
Nearly always. We only ask to see it in person if the pictures cannot show what we need.
What we do, step by step
We begin by going over the job with you. Then the area is sheeted and masked and the work begins. You can expect it to take a few hours, and we’ll keep you posted as we go.
- First the standing area is cleaned and degreased.
- Next we mask off the area.
- We apply the clear textured coating.
- We remove the masking for a neat edge.
- The coating is left to cure before use, normally overnight.
How to prepare
- Let us know which floor the room is on
- Have a window or extractor fan available
- Mention any earlier repairs or resurfacing
Ask for a price
For a price in Castle Combe, the easiest route is photos: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
