Derbyshire · England
Non-Slip Bath Coating for Chevinside homes
Clear non-slip coatings for baths and shower trays at your home in Chevinside, with a one-year guarantee on every repair.
- Worn-out textured areas
- A bath or tray that is slippery when wet
- Bath mats that harbour mould or get forgotten
Non-slip bath coating in Chevinside without replacing anything
The coating is clear and textured, so it shows only as a slightly matt area where you stand. It’s popular with older people, families and holiday lets. Whether it’s bath mats that harbour mould or get forgotten and a bath or tray that is slippery when wet, we can typically put it right, on enamelled baths, shower trays and wet room floors (ask us) alike.
All of our repairs are guaranteed for twelve months in Chevinside and everywhere else. If something goes wrong with the work, we come back. Clean with a soft brush and a mild cleaner. Don’t use abrasive pads on the textured area.
- Area
- Chevinside (DE56)
- Area hub
- Derbyshire
- Warranty
- 12 months on all our work
- Quote
- Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Landlords, agents and businesses in Chevinside
We work for landlords, letting agents and housing providers in Chevinside as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
What affects the price in Chevinside
There are no hourly rates or hidden extras. The price is based on:
- How many areas need work
- The material and finish
- Doing more than one item at once
- Previous DIY repairs that have to come out
Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
Quotes from your photos
The better the pictures, the more accurate the price. Here’s what helps:
- Your postcode, so we can check dates
- One picture of the whole bath or shower tray
- Whether it’s been repaired or coated before
- A clear, close picture of the problem area
There’s no need for us to visit first. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we will reply with a fixed quote.
What we’re called out for in Chevinside
Baths and trays are made smooth so they’re easy to clean, yet with soap and water on them they become slippery. Textured areas on older baths wear smooth too.
People usually call us after spotting something like this:
- Safety for older or less mobile people
- A bath or tray that is slippery when wet
- Resurfaced baths that are now too smooth
- Worn-out textured areas
What to look for in a quote
- How the room is protected while they work
- A fixed price, and whether VAT is included
- Whether there are any call-out or travel charges
- How long the guarantee is and what it covers
Your questions about non-slip bath coating in Chevinside
What happens next?
We check the damage, the material and your postcode, then reply with a quote.
Is repairing better than replacing?
Normally, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.
Can you quote from photos?
Yes, almost always. Clear photos let us give you a fixed price without visiting.
Are you a vetted contractor?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
When can you do it?
Your quote comes with available dates. Tell us if you need it done quickly.
It’s been repaired before. Can you still fix it?
Yes, we frequently do. It can add a little time, which we include in the quote.
Is it safe with children and pets around?
Keep pets and children away from the work area on the day, so the repair isn’t disturbed while it cures.
Do I need to be at home?
Yes. We need access to the room while we work, at a time we agree with you.
Should I try a DIY kit first?
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it will not stop us repairing it. Just mention it when you send photos, as it can add time.
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
When we’d advise against a repair
We won’t take on work that won’t last, so here’s what a repair can’t put right:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Not sure? Send pictures and we’ll give you a straight answer.
What we work on
- Resurfaced baths
- Acrylic baths
- Wet room floors (ask us)
- Shower trays
- Enamelled baths
Towns and villages near Chevinside
Also in Chevinside
Should you replace it?
The alternatives are a new textured bath or tray, or relying on a mat that needs lifting and cleaning. A coating adds grip to the bath you have. We charge the same wherever you are, so there’s no premium for Chevinside. The job itself decides the price: how much damage, what it’s made of and how many items.
Why us?
- One visit for most repairs
- One-year guarantee on every repair
- We come to you, anywhere in the UK
- We leave the room as we found it
Read our pricing.
Covering Chevinside
Chevinside is about 1 mile south-west of Belper, in Derbyshire. Wherever you are in the DE56 postcode area, we come to you. We work in 532 places across Derbyshire. You can also see our page for Birmingham, about 41 miles away.
All of DE56 is within our area, from the main roads to the quietest streets. We also cover the places around Chevinside: Milford (1 mile south), Belper (1 mile north-east), Bargate (1 mile east), Holbrook (2 miles south-east) and Cinderhill (2 miles east). Further out, we also cover Ilkeston (8 miles east), Long Eaton (12 miles south-east), Heanor (6 miles east), Ripley (4 miles north-east), Langley Mill (6 miles east) and Matlock (9 miles north).
Around Chevinside
In Chevinside, that means homes near Long Row Primary School, Belper School and Sixth Form Centre and Herbert Strutt School, among other places. Other local landmarks include St Swithun (within half a mile south-east) and The Old King's Head Public House (0.5 miles north-east). The nearest railway station is Belper station, about 0.5 miles north-east of the centre. Further afield, we also cover the area around Belper Urban District (1 mile north-east) and Babington Hospital (less than half a mile north-east). Not far away are Alport Height and Wyver Lane Nature Reserve.
What happens on the day
Nothing needs to be moved out of the room. Everything we use comes in the van with us, lay protective sheets and start once you are happy with the plan. Most jobs take a morning or an afternoon, and you can get on with other things while we are there.
- First the standing area is cleaned and degreased.
- The area to be treated is masked out.
- We apply the clear textured coating.
- We lift the masking for a clean edge.
- We leave it to cure, generally overnight.
Before we arrive
- Avoid using the area for a few hours before we arrive
- Clear toiletries, mats and anything else from around the area
- Plan for the room to be out of bounds to pets and children
Getting a price
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
